linux/drivers/mtd, branch v5.0

mtd: powernv_flash: Fix device registration error

2019-02-13T13:19:40Z

This change helps me to get multiple mtd device registered. Without this I get sysfs: cannot create duplicate filename '/bus/nvmem/devices/flash0' CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc2-00557-g1ef20ef21f22 #13 Call Trace: [c0000000b38e3220] [c000000000b58fe4] dump_stack+0xe8/0x164 (unreliable) [c0000000b38e3270] [c0000000004cf074] sysfs_warn_dup+0x84/0xb0 [c0000000b38e32f0] [c0000000004cf6c4] sysfs_do_create_link_sd.isra.0+0x114/0x150 [c0000000b38e3340] [c000000000726a84] bus_add_device+0x94/0x1e0 [c0000000b38e33c0] [c0000000007218f0] device_add+0x4d0/0x830 [c0000000b38e3480] [c0000000009d54a8] nvmem_register.part.2+0x1c8/0xb30 [c0000000b38e3560] [c000000000834530] mtd_nvmem_add+0x90/0x120 [c0000000b38e3650] [c000000000835bc8] add_mtd_device+0x198/0x4e0 [c0000000b38e36f0] [c00000000083619c] mtd_device_parse_register+0x11c/0x280 [c0000000b38e3780] [c000000000840830] powernv_flash_probe+0x180/0x250 [c0000000b38e3820] [c00000000072c120] platform_drv_probe+0x60/0xf0 [c0000000b38e38a0] [c0000000007283c8] really_probe+0x138/0x4d0 [c0000000b38e3930] [c000000000728acc] driver_probe_device+0x13c/0x1b0 [c0000000b38e39b0] [c000000000728c7c] __driver_attach+0x13c/0x1c0 [c0000000b38e3a30] [c000000000725130] bus_for_each_dev+0xa0/0x120 [c0000000b38e3a90] [c000000000727b2c] driver_attach+0x2c/0x40 [c0000000b38e3ab0] [c0000000007270f8] bus_add_driver+0x228/0x360 [c0000000b38e3b40] [c00000000072a2e0] driver_register+0x90/0x1a0 [c0000000b38e3bb0] [c00000000072c020] __platform_driver_register+0x50/0x70 [c0000000b38e3bd0] [c00000000105c984] powernv_flash_driver_init+0x24/0x38 [c0000000b38e3bf0] [c000000000010904] do_one_initcall+0x84/0x464 [c0000000b38e3cd0] [c000000001004548] kernel_init_freeable+0x530/0x634 [c0000000b38e3db0] [c000000000011154] kernel_init+0x1c/0x168 [c0000000b38e3e20] [c00000000000bed4] ret_from_kernel_thread+0x5c/0x68 mtd mtd1: Failed to register NVMEM device With the change we now have root@(none):/sys/bus/nvmem/devices# ls -al total 0 drwxr-xr-x 2 root root 0 Feb 6 20:49 . drwxr-xr-x 4 root root 0 Feb 6 20:49 .. lrwxrwxrwx 1 root root 0 Feb 6 20:49 flash@0 -> ../../../devices/platform/ibm,opal:flash@0/mtd/mtd0/flash@0 lrwxrwxrwx 1 root root 0 Feb 6 20:49 flash@1 -> ../../../devices/platform/ibm,opal:flash@1/mtd/mtd1/flash@1 Fixes: 1cbb4a1c433a ("mtd: powernv: Add powernv flash MTD abstraction driver") Signed-off-by: Aneesh Kumar K.V Signed-off-by: Boris Brezillon

mtd: Use mtd->name when registering nvmem device

2019-02-13T13:10:22Z

With this patch, we use the mtd->name instead of concatenating the name with '0'. Fixes: c4dfa25ab307 ("mtd: add support for reading MTD devices via the nvmem API") Signed-off-by: Aneesh Kumar K.V Signed-off-by: Boris Brezillon

mtd: rawnand: gpmi: fix MX28 bus master lockup problem

2019-02-06T08:39:22Z

Disable BCH soft reset according to MX23 erratum #2847 ("BCH soft reset may cause bus master lock up") for MX28 too. It has the same problem. Observed problem: once per 100,000+ MX28 reboots NAND read failed on DMA timeout errors: [ 1.770823] UBI: attaching mtd3 to ubi0 [ 2.768088] gpmi_nand: DMA timeout, last DMA :1 [ 3.958087] gpmi_nand: BCH timeout, last DMA :1 [ 4.156033] gpmi_nand: Error in ECC-based read: -110 [ 4.161136] UBI warning: ubi_io_read: error -110 while reading 64 bytes from PEB 0:0, read only 0 bytes, retry [ 4.171283] step 1 error [ 4.173846] gpmi_nand: Chip: 0, Error -1 Without BCH soft reset we successfully executed 1,000,000 MX28 reboots. I have a quote from NXP regarding this problem, from July 18th 2016: "As the i.MX23 and i.MX28 are of the same generation, they share many characteristics. Unfortunately, also the erratas may be shared. In case of the documented erratas and the workarounds, you can also apply the workaround solution of one device on the other one. This have been reported, but I’m afraid that there are not an estimated date for updating the Errata documents. Please accept our apologies for any inconveniences this may cause." Fixes: 6f2a6a52560a ("mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems") Cc: stable@vger.kernel.org Signed-off-by: Manfred Schlaegl Signed-off-by: Martin Kepplinger Reviewed-by: Miquel Raynal Reviewed-by: Fabio Estevam Acked-by: Han Xu Signed-off-by: Boris Brezillon

mtd: Make sure mtd->erasesize is valid even if the partition is of size 0

2019-02-05T23:02:51Z

Commit 33f45c44d68b ("mtd: Do not allow MTD devices with inconsistent erase properties") introduced a check to make sure ->erasesize and ->_erase values are consistent with the MTD_NO_ERASE flag. This patch did not take the 0 bytes partition case into account which can happen when the defined partition is outside the flash device memory range. Fix that by setting the partition erasesize to the parent erasesize. Fixes: 33f45c44d68b ("mtd: Do not allow MTD devices with inconsistent erase properties") Reported-by: Geert Uytterhoeven Cc: Cc: Geert Uytterhoeven Signed-off-by: Boris Brezillon Tested-by: Geert Uytterhoeven

mtd: Remove a debug trace in mtdpart.c

2019-02-01T08:44:58Z

Commit 2b6f0090a333 ("mtd: Check add_mtd_device() ret code") contained a leftover of the debug session that led to this bug fix. Remove this pr_info(). Fixes: 2b6f0090a333 ("mtd: Check add_mtd_device() ret code") Signed-off-by: Boris Brezillon

mtd: rawnand: fix kernel-doc warnings

2019-01-31T11:31:09Z

Fix kernel-doc warnings in drivers/mtd/nand/raw: ../drivers/mtd/nand/raw/nand_base.c:420: warning: Function parameter or member 'chip' not described in 'nand_fill_oob' ../drivers/mtd/nand/raw/nand_bbt.c:173: warning: Function parameter or member 'this' not described in 'read_bbt' ../drivers/mtd/nand/raw/nand_bbt.c:173: warning: Excess function parameter 'chip' description in 'read_bbt' Fixes: 0813621ba898a ("mtd: rawnand: Stop passing mtd_info objects to internal functions") Signed-off-by: Randy Dunlap Cc: Boris Brezillon Cc: Miquel Raynal Cc: Richard Weinberger Cc: linux-mtd@lists.infradead.org Acked-by: Miquel Raynal Signed-off-by: Boris Brezillon

mtd: spinand: Fix the error/cleanup path in spinand_init()

2019-01-31T11:31:02Z

The manufacturer specific initialization has already been done when block unlocking takes place, and if anything goes wrong during this procedure we should call spinand_manufacturer_cleanup(). Fixes: 7529df465248 ("mtd: nand: Add core infrastructure to support SPI NANDs") Cc: Signed-off-by: Boris Brezillon Acked-by: Miquel Raynal

mtd: spinand: Handle the case where PROGRAM LOAD does not reset the cache

2019-01-31T11:30:51Z

Looks like PROGRAM LOAD (AKA write cache) does not necessarily reset the cache content to 0xFF (depends on vendor implementation), so we must fill the page cache entirely even if we only want to program the data portion of the page, otherwise we might corrupt the BBM or user data previously programmed in OOB area. Fixes: 7529df465248 ("mtd: nand: Add core infrastructure to support SPI NANDs") Reported-by: Stefan Roese Cc: Signed-off-by: Boris Brezillon Tested-by: Stefan Roese Reviewed-by: Stefan Roese Acked-by: Miquel Raynal

mtd: rawnand: denali: get ->setup_data_interface() working again

2019-01-18T09:27:01Z

Commit 7a08dbaedd36 ("mtd: rawnand: Move ->setup_data_interface() to nand_controller_ops") missed to invert the if-conditonal for denali. Since then, the Denali NAND driver cannnot invoke setup_data_interface. Fixes: 7a08dbaedd36 ("mtd: rawnand: Move ->setup_data_interface() to nand_controller_ops") Signed-off-by: Masahiro Yamada Acked-by: Miquel Raynal Signed-off-by: Boris Brezillon

mtd: nand: jz4740: fix 'iomem ' vs. ' iomem'

2019-01-18T09:26:46Z

The function jz_nand_ioremap_resource() needs a pointer to an __iomem pointer as its last argument but this argument is declared as: void * __iomem *base Fix this by using the correct declaration: void __iomem **base which then also removes the following Sparse's warnings: 282:15: warning: incorrect type in assignment (different address spaces) 282:15: expected void *[noderef] 282:15: got void [noderef] * 322:57: warning: incorrect type in argument 4 (different address spaces) 322:57: expected void *[noderef] *base 322:57: got void [noderef] ** 402:67: warning: incorrect type in argument 4 (different address spaces) 402:67: expected void *[noderef] *base 402:67: got void [noderef] ** Signed-off-by: Luc Van Oostenryck Acked-by: Miquel Raynal Signed-off-by: Boris Brezillon