linux/drivers/net/Makefile, branch v5.7

soc: qcom: ipa: support build of IPA code

2020-03-09T05:07:10Z

Add build and Kconfig support for the Qualcomm IPA driver. Signed-off-by: Alex Elder Signed-off-by: David S. Miller

net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.

2020-02-24T21:31:42Z

The Bareudp tunnel module provides a generic L3 encapsulation tunnelling module for tunnelling different protocols like MPLS, IP,NSH etc inside a UDP tunnel. Signed-off-by: Martin Varghese Acked-by: Willem de Bruijn Signed-off-by: David S. Miller

Merge tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2020-01-29T18:09:44Z

Pull USB/Thunderbolt/PHY driver updates from Greg KH: "Here is the big USB and Thunderbolt and PHY driver updates for 5.6-rc1. With the advent of USB4, "Thunderbolt" has really become USB4, so the renaming of the Kconfig option and starting to share subsystem code has begun, hence both subsystems coming in through the same tree here. PHY driver updates also touched USB drivers, so that is coming in through here as well. Major stuff included in here are: - USB 4 initial support added (i.e. Thunderbolt) - musb driver updates - USB gadget driver updates - PHY driver updates - USB PHY driver updates - lots of USB serial stuff fixed up - USB typec updates - USB-IP fixes - lots of other smaller USB driver updates All of these have been in linux-next for a while now (the usb-serial tree is already tested in linux-next on its own before merged into here), with no reported issues" [ Removed an incorrect compile test enablement for PHY_EXYNOS5250_SATA that causes configuration warnings - Linus ] * tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits) Doc: ABI: add usb charger uevent usb: phy: show USB charger type for user usb: cdns3: fix spelling mistake and rework grammar in text usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors USB: serial: cyberjack: fix spelling mistake "To" -> "Too" USB: serial: ir-usb: simplify endpoint check USB: serial: ir-usb: make set_termios synchronous USB: serial: ir-usb: fix IrLAP framing USB: serial: ir-usb: fix link-speed handling USB: serial: ir-usb: add missing endpoint sanity check usb: typec: fusb302: fix "op-sink-microwatt" default that was in mW usb: typec: wcove: fix "op-sink-microwatt" default that was in mW usb: dwc3: pci: add ID for the Intel Comet Lake -V variant usb: typec: tcpci: mask event interrupts when remove driver usb: host: xhci-tegra: set MODULE_FIRMWARE for tegra186 usb: chipidea: add inline for ci_hdrc_host_driver_init if host is not defined usb: chipidea: handle single role for usb role class usb: musb: fix spelling mistake: "periperal" -> "peripheral" phy: ti: j721e-wiz: Fix build error without CONFIG_OF_ADDRESS USB: usbfs: Always unlink URBs in reverse order ...

thunderbolt: Update Kconfig entries to USB4

2019-12-18T14:39:18Z

Since the driver now supports USB4 which is the standard going forward, update the Kconfig entry to mention this and rename the entry from CONFIG_THUNDERBOLT to CONFIG_USB4 instead to help people to find the correct option if they want to enable USB4. Also do the same for Thunderbolt network driver. Signed-off-by: Mika Westerberg Cc: David S. Miller Link: https://lore.kernel.org/r/20191217123345.31850-6-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman

net: WireGuard secure network tunnel

2019-12-09T01:48:42Z

WireGuard is a layer 3 secure networking tunnel made specifically for the kernel, that aims to be much simpler and easier to audit than IPsec. Extensive documentation and description of the protocol and considerations, along with formal proofs of the cryptography, are available at: * https://www.wireguard.com/ * https://www.wireguard.com/papers/wireguard.pdf This commit implements WireGuard as a simple network device driver, accessible in the usual RTNL way used by virtual network drivers. It makes use of the udp_tunnel APIs, GRO, GSO, NAPI, and the usual set of networking subsystem APIs. It has a somewhat novel multicore queueing system designed for maximum throughput and minimal latency of encryption operations, but it is implemented modestly using workqueues and NAPI. Configuration is done via generic Netlink, and following a review from the Netlink maintainer a year ago, several high profile userspace tools have already implemented the API. This commit also comes with several different tests, both in-kernel tests and out-of-kernel tests based on network namespaces, taking profit of the fact that sockets used by WireGuard intentionally stay in the namespace the WireGuard interface was originally created, exactly like the semantics of userspace tun devices. See wireguard.com/netns/ for pictures and examples. The source code is fairly short, but rather than combining everything into a single file, WireGuard is developed as cleanly separable files, making auditing and comprehension easier. Things are laid out as follows: * noise.[ch], cookie.[ch], messages.h: These implement the bulk of the cryptographic aspects of the protocol, and are mostly data-only in nature, taking in buffers of bytes and spitting out buffers of bytes. They also handle reference counting for their various shared pieces of data, like keys and key lists. * ratelimiter.[ch]: Used as an integral part of cookie.[ch] for ratelimiting certain types of cryptographic operations in accordance with particular WireGuard semantics. * allowedips.[ch], peerlookup.[ch]: The main lookup structures of WireGuard, the former being trie-like with particular semantics, an integral part of the design of the protocol, and the latter just being nice helper functions around the various hashtables we use. * device.[ch]: Implementation of functions for the netdevice and for rtnl, responsible for maintaining the life of a given interface and wiring it up to the rest of WireGuard. * peer.[ch]: Each interface has a list of peers, with helper functions available here for creation, destruction, and reference counting. * socket.[ch]: Implementation of functions related to udp_socket and the general set of kernel socket APIs, for sending and receiving ciphertext UDP packets, and taking care of WireGuard-specific sticky socket routing semantics for the automatic roaming. * netlink.[ch]: Userspace API entry point for configuring WireGuard peers and devices. The API has been implemented by several userspace tools and network management utility, and the WireGuard project distributes the basic wg(8) tool. * queueing.[ch]: Shared function on the rx and tx path for handling the various queues used in the multicore algorithms. * send.c: Handles encrypting outgoing packets in parallel on multiple cores, before sending them in order on a single core, via workqueues and ring buffers. Also handles sending handshake and cookie messages as part of the protocol, in parallel. * receive.c: Handles decrypting incoming packets in parallel on multiple cores, before passing them off in order to be ingested via the rest of the networking subsystem with GRO via the typical NAPI poll function. Also handles receiving handshake and cookie messages as part of the protocol, in parallel. * timers.[ch]: Uses the timer wheel to implement protocol particular event timeouts, and gives a set of very simple event-driven entry point functions for callers. * main.c, version.h: Initialization and deinitialization of the module. * selftest/*.h: Runtime unit tests for some of the most security sensitive functions. * tools/testing/selftests/wireguard/netns.sh: Aforementioned testing script using network namespaces. This commit aims to be as self-contained as possible, implementing WireGuard as a standalone module not needing much special handling or coordination from the network subsystem. I expect for future optimizations to the network stack to positively improve WireGuard, and vice-versa, but for the time being, this exists as intentionally standalone. We introduce a menu option for CONFIG_WIREGUARD, as well as providing a verbose debug log and self-tests via CONFIG_WIREGUARD_DEBUG. Signed-off-by: Jason A. Donenfeld Cc: David Miller Cc: Greg KH Cc: Linus Torvalds Cc: Herbert Xu Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller

net: Always descend into dsa/

2019-05-14T22:20:11Z

Jiri reported that with a kernel built with CONFIG_FIXED_PHY=y, CONFIG_NET_DSA=m and CONFIG_NET_DSA_LOOP=m, we would not get to a functional state where the mock-up driver is registered. Turns out that we are not descending into drivers/net/dsa/ unconditionally, and we won't be able to link-in dsa_loop_bdinfo.o which does the actual mock-up mdio device registration. Reported-by: Jiri Pirko Fixes: 40013ff20b1b ("net: dsa: Fix functional dsa-loop dependency on FIXED_PHY") Signed-off-by: Florian Fainelli Reviewed-by: Vivien Didelot Tested-by: Jiri Pirko Signed-off-by: David S. Miller

net: Introduce net_failover driver

2018-05-29T02:59:54Z

The net_failover driver provides an automated failover mechanism via APIs to create and destroy a failover master netdev and manages a primary and standby slave netdevs that get registered via the generic failover infrastructure. The failover netdev acts a master device and controls 2 slave devices. The original paravirtual interface gets registered as 'standby' slave netdev and a passthru/vf device with the same MAC gets registered as 'primary' slave netdev. Both 'standby' and 'failover' netdevs are associated with the same 'pci' device. The user accesses the network interface via 'failover' netdev. The 'failover' netdev chooses 'primary' netdev as default for transmits when it is available with link up and running. This can be used by paravirtual drivers to enable an alternate low latency datapath. It also enables hypervisor controlled live migration of a VM with direct attached VF by failing over to the paravirtual datapath when the VF is unplugged. Signed-off-by: Sridhar Samudrala Signed-off-by: David S. Miller

net: remove cris etrax ethernet driver

2018-03-26T13:56:24Z

The cris architecture is getting removed, so we don't need the ethernet driver any more either. Acked-by: Jesper Nilsson Signed-off-by: Arnd Bergmann

netdevsim: add software driver for testing offloads

2017-12-02T23:27:57Z

To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski Reviewed-by: Simon Horman Reviewed-by: Quentin Monnet Signed-off-by: Daniel Borkmann

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2017-11-04T00:26:51Z

Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller