linux/drivers/net/dsa, branch master

net: dsa: realtek: Fix LED group port bit for non-zero LED group

2026-03-12T02:03:21Z

The rtl8366rb_led_group_port_mask() function always returns LED port bit in LED group 0; the switch statement returns the same thing in all non-default cases. This means that the driver does not currently support configuring LEDs in non-zero LED groups. Fix this. Fixes: 32d617005475a71e ("net: dsa: realtek: add LED drivers for rtl8366rb") Signed-off-by: Marek Behún Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/20260311111237.29002-1-kabel@kernel.org Signed-off-by: Jakub Kicinski

net: dsa: microchip: Fix error path in PTP IRQ setup

2026-03-12T01:06:22Z

If request_threaded_irq() fails during the PTP message IRQ setup, the newly created IRQ mapping is never disposed. Indeed, the ksz_ptp_irq_setup()'s error path only frees the mappings that were successfully set up. Dispose the newly created mapping if the associated request_threaded_irq() fails at setup. Cc: stable@vger.kernel.org Fixes: d0b8fec8ae505 ("net: dsa: microchip: Fix symetry in ksz_ptp_msg_irq_{setup/free}()") Signed-off-by: Bastien Curutchet (Schneider Electric) Reviewed-by: Simon Horman Reviewed-by: Vladimir Oltean Link: https://patch.msgid.link/20260309-ksz-ptp-irq-fix-v1-1-757b3b985955@bootlin.com Signed-off-by: Jakub Kicinski

net: dsa: mxl862xx: don't set user_mii_bus

2026-03-11T02:18:13Z

The PHY addresses in the MII bus are not equal to the port addresses, so the bus cannot be assigned as user_mii_bus. Falling back on the user_mii_bus in case a PHY isn't declared in device tree will result in using the wrong (in this case: off-by-+1) PHY. Remove the wrong assignment. Fixes: 23794bec1cb60 ("net: dsa: add basic initial driver for MxL862xx switches") Suggested-by: Vladimir Oltean Signed-off-by: Daniel Golle Reviewed-by: Vladimir Oltean Link: https://patch.msgid.link/0f0df310fd8cab57e0e5e3d0831dd057fd05bcd5.1773103271.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski

net: dsa: sja1105: ensure phylink_replay_link_end() will not be missed

2026-03-07T01:48:01Z

Most errors that can occur in sja1105_static_config_reload() are fatal (example: fail to communicate with hardware), but not all are. For example, sja1105_static_config_upload() -> kcalloc() may fail, and if that happens, we have called phylink_replay_link_begin() but never phylink_replay_link_end(). Under that circumstance, all port phylink instances are left in a state where the resolver is stopped with the PHYLINK_DISABLE_REPLAY bit set. We have effectively disabled link management with no way to recover from this condition. Avoid that situation by ensuring phylink_replay_link_begin() is always paired with phylink_replay_link_end(), regardless of whether we faced any errors during switch reset, configuration reload and general state reload. Fixes: 0b2edc531e0b ("net: dsa: sja1105: let phylink help with the replay of link callbacks") Signed-off-by: Vladimir Oltean Link: https://patch.msgid.link/20260304220900.3865120-3-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski

net: dsa: sja1105: reorder sja1105_reload_cbs() and phylink_replay_link_end()

2026-03-07T01:48:01Z

Move phylink_replay_link_end() as the last locked operation under sja1105_static_config_reload(). The purpose is to be able to goto this step from the error path of intermediate steps (we must call phylink_replay_link_end()). sja1105_reload_cbs() notably does not depend on port states or link speeds. See commit 954ad9bf13c4 ("net: dsa: sja1105: fix bandwidth discrepancy between tc-cbs software and offload") which has discussed this issue specifically. Signed-off-by: Vladimir Oltean Link: https://patch.msgid.link/20260304220900.3865120-2-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski

net: dsa: realtek: rtl8365mb: remove ifOutDiscards from rx_packets

2026-03-06T02:27:04Z

rx_packets should report the number of frames successfully received: unicast + multicast + broadcast. Subtracting ifOutDiscards (a TX counter) is incorrect and can undercount RX packets. RX drops are already reported via rx_dropped (e.g. etherStatsDropEvents), so there is no need to adjust rx_packets. This patch removes the subtraction of ifOutDiscards from rx_packets in rtl8365mb_stats_update(). Link: https://lore.kernel.org/netdev/878777925.105015.1763423928520@mail.yahoo.com/ Fixes: 4af2950c50c8 ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC") Signed-off-by: Mieczyslaw Nalewaj Signed-off-by: Luiz Angelo Daros de Luca Reviewed-by: Simon Horman Acked-by: Linus Walleij Link: https://patch.msgid.link/20260303-realtek_namiltd_fix2-v1-1-bfa433d3401e@gmail.com Signed-off-by: Jakub Kicinski

net: dsa: realtek: rtl8365mb: fix rtl8365mb_phy_ocp_write return value

2026-03-03T02:32:40Z

Function rtl8365mb_phy_ocp_write() always returns 0, even when an error occurs during register access. This patch fixes the return value to propagate the actual error code from regmap operations. Link: https://lore.kernel.org/netdev/a2dfde3c-d46f-434b-9d16-1e251e449068@yahoo.com/ Fixes: 2796728460b8 ("net: dsa: realtek: rtl8365mb: serialize indirect PHY register access") Signed-off-by: Mieczyslaw Nalewaj Reviewed-by: Andrew Lunn Signed-off-by: Luiz Angelo Daros de Luca Reviewed-by: Linus Walleij Link: https://patch.msgid.link/20260301-realtek_namiltd_fix1-v1-1-43a6bb707f9c@gmail.com Signed-off-by: Jakub Kicinski

Merge tag 'net-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2026-02-26T16:00:13Z

Pull networking fixes from Paolo Abeni: "Including fixes from IPsec, Bluetooth and netfilter Current release - regressions: - wifi: fix dev_alloc_name() return value check - rds: fix recursive lock in rds_tcp_conn_slots_available Current release - new code bugs: - vsock: lock down child_ns_mode as write-once Previous releases - regressions: - core: - do not pass flow_id to set_rps_cpu() - consume xmit errors of GSO frames - netconsole: avoid OOB reads, msg is not nul-terminated - netfilter: h323: fix OOB read in decode_choice() - tcp: re-enable acceptance of FIN packets when RWIN is 0 - udplite: fix null-ptr-deref in __udp_enqueue_schedule_skb(). - wifi: brcmfmac: fix potential kernel oops when probe fails - phy: register phy led_triggers during probe to avoid AB-BA deadlock - eth: - bnxt_en: fix deleting of Ntuple filters - wan: farsync: fix use-after-free bugs caused by unfinished tasklets - xscale: check for PTP support properly Previous releases - always broken: - tcp: fix potential race in tcp_v6_syn_recv_sock() - kcm: fix zero-frag skb in frag_list on partial sendmsg error - xfrm: - fix race condition in espintcp_close() - always flush state and policy upon NETDEV_UNREGISTER event - bluetooth: - purge error queues in socket destructors - fix response to L2CAP_ECRED_CONN_REQ - eth: - mlx5: - fix circular locking dependency in dump - fix "scheduling while atomic" in IPsec MAC address query - gve: fix incorrect buffer cleanup for QPL - team: avoid NETDEV_CHANGEMTU event when unregistering slave - usb: validate USB endpoints" * tag 'net-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits) netfilter: nf_conntrack_h323: fix OOB read in decode_choice() dpaa2-switch: validate num_ifs to prevent out-of-bounds write net: consume xmit errors of GSO frames vsock: document write-once behavior of the child_ns_mode sysctl vsock: lock down child_ns_mode as write-once selftests/vsock: change tests to respect write-once child ns mode net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address query net/mlx5: Fix missing devlink lock in SRIOV enable error path net/mlx5: E-switch, Clear legacy flag when moving to switchdev net/mlx5: LAG, disable MPESW in lag_disable_change() net/mlx5: DR, Fix circular locking dependency in dump selftests: team: Add a reference count leak test team: avoid NETDEV_CHANGEMTU event when unregistering slave net: mana: Fix double destroy_workqueue on service rescan PCI path MAINTAINERS: Update maintainer entry for QUALCOMM ETHQOS ETHERNET DRIVER dpll: zl3073x: Remove redundant cleanup in devm_dpll_init() selftests/net: packetdrill: Verify acceptance of FIN packets when RWIN is 0 tcp: re-enable acceptance of FIN packets when RWIN is 0 vsock: Use container_of() to get net namespace in sysctl handlers net: usb: kaweth: validate USB endpoints ...

Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses

2026-02-22T16:26:33Z

Conversion performed via this Coccinelle script: // SPDX-License-Identifier: GPL-2.0-only // Options: --include-headers-for-types --all-includes --include-headers --keep-comments virtual patch @gfp depends on patch && !(file in "tools") && !(file in "samples")@ identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex, kzalloc_obj,kzalloc_objs,kzalloc_flex, kvmalloc_obj,kvmalloc_objs,kvmalloc_flex, kvzalloc_obj,kvzalloc_objs,kvzalloc_flex}; @@ ALLOC(... - , GFP_KERNEL ) $ make coccicheck MODE=patch COCCI=gfp.cocci Build and boot tested x86_64 with Fedora 42's GCC and Clang: Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01 Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01 Signed-off-by: Kees Cook Signed-off-by: Linus Torvalds

Convert more 'alloc_obj' cases to default GFP_KERNEL arguments

2026-02-22T04:03:00Z

This converts some of the visually simpler cases that have been split over multiple lines. I only did the ones that are easy to verify the resulting diff by having just that final GFP_KERNEL argument on the next line. Somebody should probably do a proper coccinelle script for this, but for me the trivial script actually resulted in an assertion failure in the middle of the script. I probably had made it a bit _too_ trivial. So after fighting that far a while I decided to just do some of the syntactically simpler cases with variations of the previous 'sed' scripts. The more syntactically complex multi-line cases would mostly really want whitespace cleanup anyway. Signed-off-by: Linus Torvalds