linux/drivers/net/hyperv, branch v5.7

hv_netvsc: Fix netvsc_start_xmit's return type

2020-05-01T22:24:46Z

netvsc_start_xmit is used as a callback function for the ndo_start_xmit function pointer. ndo_start_xmit's return type is netdev_tx_t but netvsc_start_xmit's return type is int. This causes a failure with Control Flow Integrity (CFI), which requires function pointer prototypes and callback function definitions to match exactly. When CFI is in enforcing, the kernel panics. When booting a CFI kernel with WSL 2, the VM is immediately terminated because of this. The splat when CONFIG_CFI_PERMISSIVE is used: [ 5.916765] CFI failure (target: netvsc_start_xmit+0x0/0x10): [ 5.916771] WARNING: CPU: 8 PID: 0 at kernel/cfi.c:29 __cfi_check_fail+0x2e/0x40 [ 5.916772] Modules linked in: [ 5.916774] CPU: 8 PID: 0 Comm: swapper/8 Not tainted 5.7.0-rc3-next-20200424-microsoft-cbl-00001-ged4eb37d2c69-dirty #1 [ 5.916776] RIP: 0010:__cfi_check_fail+0x2e/0x40 [ 5.916777] Code: 48 c7 c7 70 98 63 a9 48 c7 c6 11 db 47 a9 e8 69 55 59 00 85 c0 75 02 5b c3 48 c7 c7 73 c6 43 a9 48 89 de 31 c0 e8 12 2d f0 ff <0f> 0b 5b c3 00 00 cc cc 00 00 cc cc 00 00 cc cc 00 00 85 f6 74 25 [ 5.916778] RSP: 0018:ffffa803c0260b78 EFLAGS: 00010246 [ 5.916779] RAX: 712a1af25779e900 RBX: ffffffffa8cf7950 RCX: ffffffffa962cf08 [ 5.916779] RDX: ffffffffa9c36b60 RSI: 0000000000000082 RDI: ffffffffa9c36b5c [ 5.916780] RBP: ffff8ffc4779c2c0 R08: 0000000000000001 R09: ffffffffa9c3c300 [ 5.916781] R10: 0000000000000151 R11: ffffffffa9c36b60 R12: ffff8ffe39084000 [ 5.916782] R13: ffffffffa8cf7950 R14: ffffffffa8d12cb0 R15: ffff8ffe39320140 [ 5.916784] FS: 0000000000000000(0000) GS:ffff8ffe3bc00000(0000) knlGS:0000000000000000 [ 5.916785] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.916786] CR2: 00007ffef5749408 CR3: 00000002f4f5e000 CR4: 0000000000340ea0 [ 5.916787] Call Trace: [ 5.916788] [ 5.916790] __cfi_check+0x3ab58/0x450e0 [ 5.916793] ? dev_hard_start_xmit+0x11f/0x160 [ 5.916795] ? sch_direct_xmit+0xf2/0x230 [ 5.916796] ? __dev_queue_xmit.llvm.11471227737707190958+0x69d/0x8e0 [ 5.916797] ? neigh_resolve_output+0xdf/0x220 [ 5.916799] ? neigh_connected_output.cfi_jt+0x8/0x8 [ 5.916801] ? ip6_finish_output2+0x398/0x4c0 [ 5.916803] ? nf_nat_ipv6_out+0x10/0xa0 [ 5.916804] ? nf_hook_slow+0x84/0x100 [ 5.916807] ? ip6_input_finish+0x8/0x8 [ 5.916807] ? ip6_output+0x6f/0x110 [ 5.916808] ? __ip6_local_out.cfi_jt+0x8/0x8 [ 5.916810] ? mld_sendpack+0x28e/0x330 [ 5.916811] ? ip_rt_bug+0x8/0x8 [ 5.916813] ? mld_ifc_timer_expire+0x2db/0x400 [ 5.916814] ? neigh_proxy_process+0x8/0x8 [ 5.916816] ? call_timer_fn+0x3d/0xd0 [ 5.916817] ? __run_timers+0x2a9/0x300 [ 5.916819] ? rcu_core_si+0x8/0x8 [ 5.916820] ? run_timer_softirq+0x14/0x30 [ 5.916821] ? __do_softirq+0x154/0x262 [ 5.916822] ? native_x2apic_icr_write+0x8/0x8 [ 5.916824] ? irq_exit+0xba/0xc0 [ 5.916825] ? hv_stimer0_vector_handler+0x99/0xe0 [ 5.916826] ? hv_stimer0_callback_vector+0xf/0x20 [ 5.916826] [ 5.916828] ? hv_stimer_global_cleanup.cfi_jt+0x8/0x8 [ 5.916829] ? raw_setsockopt+0x8/0x8 [ 5.916830] ? default_idle+0xe/0x10 [ 5.916832] ? do_idle.llvm.10446269078108580492+0xb7/0x130 [ 5.916833] ? raw_setsockopt+0x8/0x8 [ 5.916833] ? cpu_startup_entry+0x15/0x20 [ 5.916835] ? cpu_hotplug_enable.cfi_jt+0x8/0x8 [ 5.916836] ? start_secondary+0x188/0x190 [ 5.916837] ? secondary_startup_64+0xa5/0xb0 [ 5.916838] ---[ end trace f2683fa869597ba5 ]--- Avoid this by using the right return type for netvsc_start_xmit. Fixes: fceaf24a943d8 ("Staging: hv: add the Hyper-V virtual network driver") Link: https://github.com/ClangBuiltLinux/linux/issues/1009 Signed-off-by: Nathan Chancellor Reviewed-by: Haiyang Zhang Signed-off-by: David S. Miller

hv_netvsc: Remove unnecessary round_up for recv_completion_cnt

2020-03-31T02:43:42Z

The vzalloc_node(), already rounds the total size to whole pages, and sizeof(u64) is smaller than sizeof(struct recv_comp_data). So round_up of recv_completion_cnt is not necessary, and may cause extra memory allocation. To save memory, remove this unnecessary round_up for recv_completion_cnt. Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller

net/ethtool: Introduce link_ksettings API for virtual network devices

2020-03-01T05:48:55Z

With the ethtool_virtdev_set_link_ksettings function in core/ethtool.c, ibmveth, netvsc, and virtio now use the core's helper function. Funtionality changes that pertain to ibmveth driver include: 1. Changed the initial hardcoded link speed to 1GB. 2. Added support for allowing a user to change the reported link speed via ethtool. Functionality changes to the netvsc driver include: 1. When netvsc_get_link_ksettings is called, it will defer to the VF device if it exists to pull accelerated networking values, otherwise pull default or user-defined values. 2. Similarly, if netvsc_set_link_ksettings called and a VF device exists, the real values of speed and duplex are changed. Signed-off-by: Cris Forno Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2020-02-28T02:31:39Z

The mptcp conflict was overlapping additions. The SMC conflict was an additional and removal happening at the same time. Signed-off-by: David S. Miller

hv_netvsc: Fix unwanted wakeup in netvsc_attach()

2020-02-24T00:32:37Z

When netvsc_attach() is called by operations like changing MTU, etc., an extra wakeup may happen while netvsc_attach() calling rndis_filter_device_add() which sends rndis messages when queue is stopped in netvsc_detach(). The completion message will wake up queue 0. We can reproduce the issue by changing MTU etc., then the wake_queue counter from "ethtool -S" will increase beyond stop_queue counter: stop_queue: 0 wake_queue: 1 The issue causes queue wake up, and counter increment, no other ill effects in current code. So we didn't see any network problem for now. To fix this, initialize tx_disable to true, and set it to false when the NIC is ready to be attached or registered. Fixes: 7b2ee50c0cd5 ("hv_netvsc: common detach logic") Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller

hv_netvsc: use new helper tcp_v6_gso_csum_prep

2020-02-19T19:20:59Z

Use new helper tcp_v6_gso_csum_prep in additional network drivers. Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller

hv_netvsc: Fix XDP refcnt for synthetic and VF NICs

2020-02-07T10:33:01Z

The caller of XDP_SETUP_PROG has already incremented refcnt in __bpf_prog_get(), so drivers should only increment refcnt by num_queues - 1. To fix the issue, update netvsc_xdp_set() to add the correct number to refcnt. Hold a refcnt in netvsc_xdp_set()’s other caller, netvsc_attach(). And, do the same in netvsc_vf_setxdp(). Otherwise, every time when VF is removed and added from the host side, the refcnt will be decreased by one, which may cause page fault when unloading xdp program. Fixes: 351e1581395f ("hv_netvsc: Add XDP support") Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller

hv_netvsc: Add XDP support

2020-01-25T09:43:19Z

This patch adds support of XDP in native mode for hv_netvsc driver, and transparently sets the XDP program on the associated VF NIC as well. Setting / unsetting XDP program on synthetic NIC (netvsc) propagates to VF NIC automatically. Setting / unsetting XDP program on VF NIC directly is not recommended, also not propagated to synthetic NIC, and may be overwritten by setting of synthetic NIC. The Azure/Hyper-V synthetic NIC receive buffer doesn't provide headroom for XDP. We thought about re-use the RNDIS header space, but it's too small. So we decided to copy the packets to a page buffer for XDP. And, most of our VMs on Azure have Accelerated Network (SRIOV) enabled, so most of the packets run on VF NIC. The synthetic NIC is considered as a fallback data-path. So the data copy on netvsc won't impact performance significantly. XDP program cannot run with LRO (RSC) enabled, so you need to disable LRO before running XDP: ethtool -K eth0 lro off XDP actions not yet supported: XDP_REDIRECT Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller

hv_netvsc: Fix memory leak when removing rndis device

2020-01-15T21:37:45Z

kmemleak detects the following memory leak when hot removing a network device: unreferenced object 0xffff888083f63600 (size 256): comm "kworker/0:1", pid 12, jiffies 4294831717 (age 1113.676s) hex dump (first 32 bytes): 00 40 c7 33 80 88 ff ff 00 00 00 00 10 00 00 00 .@.3............ 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... backtrace: [<00000000d4a8f5be>] rndis_filter_device_add+0x117/0x11c0 [hv_netvsc] [<000000009c02d75b>] netvsc_probe+0x5e7/0xbf0 [hv_netvsc] [<00000000ddafce23>] vmbus_probe+0x74/0x170 [hv_vmbus] [<00000000046e64f1>] really_probe+0x22f/0xb50 [<000000005cc35eb7>] driver_probe_device+0x25e/0x370 [<0000000043c642b2>] bus_for_each_drv+0x11f/0x1b0 [<000000005e3d09f0>] __device_attach+0x1c6/0x2f0 [<00000000a72c362f>] bus_probe_device+0x1a6/0x260 [<0000000008478399>] device_add+0x10a3/0x18e0 [<00000000cf07b48c>] vmbus_device_register+0xe7/0x1e0 [hv_vmbus] [<00000000d46cf032>] vmbus_add_channel_work+0x8ab/0x1770 [hv_vmbus] [<000000002c94bb64>] process_one_work+0x919/0x17d0 [<0000000096de6781>] worker_thread+0x87/0xb40 [<00000000fbe7397e>] kthread+0x333/0x3f0 [<000000004f844269>] ret_from_fork+0x3a/0x50 rndis_filter_device_add() allocates an instance of struct rndis_device which never gets deallocated as rndis_filter_device_remove() sets net_device->extension which points to the rndis_device struct to NULL, leaving the rndis_device dangling. Since net_device->extension is eventually freed in free_netvsc_device(), we refrain from setting it to NULL inside rndis_filter_device_remove() Signed-off-by: Mohammed Gamal Reviewed-by: Haiyang Zhang Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2019-12-22T17:54:33Z

Pull networking fixes from David Miller: 1) Several nf_flow_table_offload fixes from Pablo Neira Ayuso, including adding a missing ipv6 match description. 2) Several heap overflow fixes in mwifiex from qize wang and Ganapathi Bhat. 3) Fix uninit value in bond_neigh_init(), from Eric Dumazet. 4) Fix non-ACPI probing of nxp-nci, from Stephan Gerhold. 5) Fix use after free in tipc_disc_rcv(), from Tuong Lien. 6) Enforce limit of 33 tail calls in mips and riscv JIT, from Paul Chaignon. 7) Multicast MAC limit test is off by one in qede, from Manish Chopra. 8) Fix established socket lookup race when socket goes from TCP_ESTABLISHED to TCP_LISTEN, because there lacks an intervening RCU grace period. From Eric Dumazet. 9) Don't send empty SKBs from tcp_write_xmit(), also from Eric Dumazet. 10) Fix active backup transition after link failure in bonding, from Mahesh Bandewar. 11) Avoid zero sized hash table in gtp driver, from Taehee Yoo. 12) Fix wrong interface passed to ->mac_link_up(), from Russell King. 13) Fix DSA egress flooding settings in b53, from Florian Fainelli. 14) Memory leak in gmac_setup_txqs(), from Navid Emamdoost. 15) Fix double free in dpaa2-ptp code, from Ioana Ciornei. 16) Reject invalid MTU values in stmmac, from Jose Abreu. 17) Fix refcount leak in error path of u32 classifier, from Davide Caratti. 18) Fix regression causing iwlwifi firmware crashes on boot, from Anders Kaseorg. 19) Fix inverted return value logic in llc2 code, from Chan Shu Tak. 20) Disable hardware GRO when XDP is attached to qede, frm Manish Chopra. 21) Since we encode state in the low pointer bits, dst metrics must be at least 4 byte aligned, which is not necessarily true on m68k. Add annotations to fix this, from Geert Uytterhoeven. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (160 commits) sfc: Include XDP packet headroom in buffer step size. sfc: fix channel allocation with brute force net: dst: Force 4-byte alignment of dst_metrics selftests: pmtu: fix init mtu value in description hv_netvsc: Fix unwanted rx_table reset net: phy: ensure that phy IDs are correctly typed mod_devicetable: fix PHY module format qede: Disable hardware gro when xdp prog is installed net: ena: fix issues in setting interrupt moderation params in ethtool net: ena: fix default tx interrupt moderation interval net/smc: unregister ib devices in reboot_event net: stmmac: platform: Fix MDIO init for platforms without PHY llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c) net: hisilicon: Fix a BUG trigered by wrong bytes_compl net: dsa: ksz: use common define for tag len s390/qeth: don't return -ENOTSUPP to userspace s390/qeth: fix promiscuous mode after reset s390/qeth: handle error due to unsupported transport mode cxgb4: fix refcount init for TC-MQPRIO offload tc-testing: initial tdc selftests for cls_u32 ...