linux/drivers/net/ipa/ipa_interrupt.c, branch v6.2

net: ipa: disable ipa interrupt during suspend

2023-01-18T03:04:13Z

The IPA interrupt can fire when pm_runtime is disabled due to it racing with the PM suspend/resume code. This causes a splat in the interrupt handler when it tries to call pm_runtime_get(). Explicitly disable the interrupt in our ->suspend callback, and re-enable it in ->resume to avoid this. If there is an interrupt pending it will be handled after resuming. The interrupt is a wake_irq, as a result even when disabled if it fires it will cause the system to wake from suspend as well as cancel any suspend transition that may be in progress. If there is an interrupt pending, the ipa_isr_thread handler will be called after resuming. Fixes: 1aac309d3207 ("net: ipa: use autosuspend") Signed-off-by: Caleb Connolly Reviewed-by: Alex Elder Link: https://lore.kernel.org/r/20230115175925.465918-1-caleb.connolly@linaro.org Signed-off-by: Jakub Kicinski

net: ipa: use proper endpoint mask for suspend

2023-01-01T12:01:14Z

It is now possible for a system to have more than 32 endpoints. As a result, registers related to endpoint suspend are parameterized, with 32 endpoints represented in one more registers. In ipa_interrupt_suspend_control(), the IPA_SUSPEND_EN register offset is determined properly, but the bit mask used still assumes the number of enpoints won't exceed 32. This is a bug. Fix it. Fixes: f298ba785e2d ("net: ipa: add a parameter to suspend registers") Signed-off-by: Alex Elder Signed-off-by: David S. Miller

net: ipa: use a bitmap for available endpoints

2022-11-04T10:16:53Z

Similar to the previous patch, replace the 32-bit unsigned used to track endpoints supported by hardware with a Linux bitmap, to allow an arbitrary number of endpoints to be represented. Move ipa_endpoint_deconfig() above ipa_endpoint_config() and use it in the error path of the latter function. Signed-off-by: Alex Elder Signed-off-by: David S. Miller

net: ipa: add a parameter to suspend registers

2022-11-04T10:16:53Z

The SUSPEND_INFO, SUSPEND_EN, SUSPEND_CLR registers represent endpoint IDs in a bit mask. When more than 32 endpoints are supported, these registers will be replicated as needed to represent the number of supported endpoints. Update the definitions of these registers to have a stride of 4 bytes, and update the code that operates them to select the proper offset and bit. Signed-off-by: Alex Elder Signed-off-by: David S. Miller

net: ipa: update copyrights

2022-10-03T23:49:20Z

Some source files state copyright dates that are earlier than the last modification of the file. Change the copyright year to 2022 in all such cases. Signed-off-by: Alex Elder Link: https://lore.kernel.org/r/20220930224549.3503434-1-elder@linaro.org Signed-off-by: Jakub Kicinski

net: ipa: introduce ipa_reg()

2022-09-28T01:42:50Z

Create a new function that returns a register descriptor given its ID. Change ipa_reg_offset() and ipa_reg_n_offset() so they take a register descriptor argument rather than an IPA pointer and register ID. Have them accept null pointers (and return an invalid 0 offset), to avoid the need for excessive error checking. (A warning is issued whenever ipa_reg() returns 0). Call ipa_reg() or ipa_reg_n() to look up information about the register before calls to ipa_reg_offset() and ipa_reg_n_offset(). Delay looking up offsets until they're needed to read or write registers. Signed-off-by: Alex Elder Signed-off-by: Jakub Kicinski

net: ipa: use IPA register IDs to determine offsets

2022-09-28T01:42:49Z

Expose two inline functions that return the offset for a register whose ID is provided; one of them takes an additional argument that's used for registers that are parameterized. These both use a common helper function __ipa_reg_offset(), which just uses the offset symbols already defined. Replace all references to the offset macros defined for IPA registers with calls to ipa_reg_offset() or ipa_reg_n_offset(). Signed-off-by: Alex Elder Signed-off-by: Jakub Kicinski

net: ipa: don't proceed to out-of-bound write

2022-05-20T01:44:51Z

GCC 12 seems upset that we check ipa_irq against array bound but then proceed, anyway: drivers/net/ipa/ipa_interrupt.c: In function ‘ipa_interrupt_add’: drivers/net/ipa/ipa_interrupt.c:196:27: warning: array subscript 30 is above array bounds of ‘void (*[30])(struct ipa *, enum ipa_irq_id)’ [-Warray-bounds] 196 | interrupt->handler[ipa_irq] = handler; | ~~~~~~~~~~~~~~~~~~^~~~~~~~~ drivers/net/ipa/ipa_interrupt.c:42:27: note: while referencing ‘handler’ 42 | ipa_irq_handler_t handler[IPA_IRQ_COUNT]; | ^~~~~~~ Reviewed-by: Alex Elder Link: https://lore.kernel.org/r/20220519004417.2109886-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

net: ipa: use autosuspend

2021-08-22T08:44:17Z

Use runtime power management autosuspend. Up until this point, we only suspended the IPA hardware for system suspend; now we'll suspend it aggressively using runtime power management, setting the initial autosuspend delay to half a second of inactivity. Replace pm_runtime_put() calls with pm_runtime_put_autosuspend(), call pm_runtime_mark_last_busy() before each of those. In places where we're shutting things down, or decrementing power references for errors, use pm_runtime_put_noidle() instead. Finally, remove ipa_runtime_idle(), so the ->runtime_suspend callback will occur if idle. Signed-off-by: Alex Elder Signed-off-by: David S. Miller

net: ipa: kill ipa_clock_get()

2021-08-20T13:45:47Z

The only remaining user of the ipa_clock_{get,put}() interface is ipa_isr_thread(). Replace calls to ipa_clock_get() there calling pm_runtime_get_sync() instead. And call pm_runtime_put() there rather than ipa_clock_put(). Warn if we ever get an error. With that, we can get rid of ipa_clock_get() and ipa_clock_put(). Signed-off-by: Alex Elder Signed-off-by: David S. Miller