linux/drivers/net/netdevsim/dev.c, branch v5.10

netdevsim: set .owner to THIS_MODULE

2020-11-17T22:08:59Z

If THIS_MODULE is not set, the module would be removed while debugfs is being used. It eventually makes kernel panic. Fixes: 82c93a87bf8b ("netdevsim: implement couple of testing devlink health reporters") Fixes: 424be63ad831 ("netdevsim: add UDP tunnel port offload support") Fixes: 4418f862d675 ("netdevsim: implement support for devlink region and snapshots") Fixes: d3cbb907ae57 ("netdevsim: add ACL trap reporting cookie as a metadata") Signed-off-by: Taehee Yoo Link: https://lore.kernel.org/r/20201115103041.30701-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski

devlink: Add devlink reload limit option

2020-10-09T19:06:52Z

Add reload limit to demand restrictions on reload actions. Reload limits supported: no_reset: No reset allowed, no down time allowed, no link flap and no configuration is lost. By default reload limit is unspecified and so no constraints on reload actions are required. Some combinations of action and limit are invalid. For example, driver can not reinitialize its entities without any downtime. The no_reset reload limit will have usecase in this patchset to implement restricted fw_activate on mlx5. Have the uapi parameter of reload limit ready for future support of multiselection. Signed-off-by: Moshe Shemesh Reviewed-by: Jiri Pirko Signed-off-by: Jakub Kicinski

devlink: Add reload action option to devlink reload command

2020-10-09T19:06:52Z

Add devlink reload action to allow the user to request a specific reload action. The action parameter is optional, if not specified then devlink driver re-init action is used (backward compatible). Note that when required to do firmware activation some drivers may need to reload the driver. On the other hand some drivers may need to reset the firmware to reinitialize the driver entities. Therefore, the devlink reload command returns the actions which were actually performed. Reload actions supported are: driver_reinit: driver entities re-initialization, applying devlink-param and devlink-resource values. fw_activate: firmware activate. command examples: $devlink dev reload pci/0000:82:00.0 action driver_reinit reload_actions_performed: driver_reinit $devlink dev reload pci/0000:82:00.0 action fw_activate reload_actions_performed: driver_reinit fw_activate Signed-off-by: Moshe Shemesh Reviewed-by: Jakub Kicinski Reviewed-by: Jacob Keller Reviewed-by: Jiri Pirko Signed-off-by: Jakub Kicinski

netdevsim: add support for flash_update overwrite mask

2020-09-26T00:20:57Z

The devlink interface recently gained support for a new "overwrite mask" parameter that allows specifying how various sub-sections of a flash component are modified when updating. Add support for this to netdevsim, to enable easily testing the interface. Make the allowed overwrite mask values controllable via a debugfs parameter. This enables testing a flow where the driver rejects an unsupportable overwrite mask. Signed-off-by: Jacob Keller Reviewed-by: Jakub Kicinski Signed-off-by: David S. Miller

devlink: convert flash_update to use params structure

2020-09-26T00:20:57Z

The devlink core recently gained support for checking whether the driver supports a flash_update parameter, via `supported_flash_update_params`. However, parameters are specified as function arguments. Adding a new parameter still requires modifying the signature of the .flash_update callback in all drivers. Convert the .flash_update function to take a new `struct devlink_flash_update_params` instead. By using this structure, and the `supported_flash_update_params` bit field, a new parameter to flash_update can be added without requiring modification to existing drivers. As before, all parameters except file_name will require driver opt-in. Because file_name is a necessary field to for the flash_update to make sense, no "SUPPORTED" bitflag is provided and it is always considered valid. All future additional parameters will require a new bit in the supported_flash_update_params bitfield. Signed-off-by: Jacob Keller Reviewed-by: Jakub Kicinski Cc: Jiri Pirko Cc: Jakub Kicinski Cc: Jonathan Corbet Cc: Michael Chan Cc: Bin Luo Cc: Saeed Mahameed Cc: Leon Romanovsky Cc: Ido Schimmel Cc: Danielle Ratson Signed-off-by: David S. Miller

devlink: check flash_update parameter support in net core

2020-09-26T00:20:57Z

When implementing .flash_update, drivers which do not support per-component update are manually checking the component parameter to verify that it is NULL. Without this check, the driver might accept an update request with a component specified even though it will not honor such a request. Instead of having each driver check this, move the logic into net/core/devlink.c, and use a new `supported_flash_update_params` field in the devlink_ops. Drivers which will support per-component update must now specify this by setting DEVLINK_SUPPORT_FLASH_UPDATE_COMPONENT in the supported_flash_update_params in their devlink_ops. This helps ensure that drivers do not forget to check for a NULL component if they do not support per-component update. This also enables a slightly better error message by enabling the core stack to set the netlink bad attribute message to indicate precisely the unsupported attribute in the message. Going forward, any new additional parameter to flash update will require a bit in the supported_flash_update_params bitfield. Signed-off-by: Jacob Keller Reviewed-by: Jakub Kicinski Cc: Jiri Pirko Cc: Jonathan Corbet Cc: Michael Chan Cc: Bin Luo Cc: Saeed Mahameed Cc: Leon Romanovsky Cc: Ido Schimmel Cc: Danielle Ratson Cc: Shannon Nelson Signed-off-by: David S. Miller

net: devlink: region: Pass the region ops to the snapshot function

2020-09-19T01:17:45Z

Pass the region to be snapshotted to the function performing the snapshot. This allows one function to operate on numerous regions. v4: Add missing kerneldoc for ICE Signed-off-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

netdevsim: devlink flash timeout message

2020-09-18T20:54:23Z

Add a simple devlink flash timeout message to exercise the message mechanism. Signed-off-by: Shannon Nelson Signed-off-by: David S. Miller

devlink: Pass extack when setting trap's action and group's parameters

2020-08-04T01:06:46Z

A later patch will refuse to set the action of certain traps in mlxsw and also to change the policer binding of certain groups. Pass extack so that failure could be communicated clearly to user space. Reviewed-by: Petr Machata Reviewed-by: Jiri Pirko Signed-off-by: Petr Machata Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller

netdevsim: add UDP tunnel port offload support

2020-07-10T20:54:00Z

Add UDP tunnel port handlers to our fake driver so we can test the core infra. Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller