linux/drivers/net/phy/Kconfig, branch master

net: phy: remove Kconfig symbol MDIO_BUS

2026-03-19T01:27:12Z

After usage of config symbol MDIO_BUS has been removed from REGMAP_MIO as last user, the symbol can be removed. Signed-off-by: Heiner Kallweit Link: https://patch.msgid.link/9cdf83e9-470d-45da-8efe-ace0decf0204@gmail.com Signed-off-by: Jakub Kicinski

net: phy: air_en8811h: deprecate "airoha,pnswap-rx" and "airoha,pnswap-tx"

2026-01-22T03:46:58Z

Prefer the new "rx-polarity" and "tx-polarity" properties, and use the vendor specific ones as fallback if the standard description doesn't exist. Signed-off-by: Vladimir Oltean Reviewed-by: Maxime Chevallier Link: https://patch.msgid.link/20260119091220.1493761-3-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski

net: phy: microchip_t1s: add support for Microchip LAN867X Rev.D0 PHY

2025-10-31T23:52:05Z

Add support for the LAN8670/1/2 Rev.D0 10BASE-T1S PHYs from Microchip. The new Rev.D0 silicon requires a specific set of initialization settings to be configured for optimal performance and compliance with OPEN Alliance specifications, as described in Microchip Application Note AN1699 (Revision G, DS60001699G – October 2025). https://www.microchip.com/en-us/application-notes/an1699 Signed-off-by: Parthiban Veerasooran Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/20251030102258.180061-2-parthiban.veerasooran@microchip.com Signed-off-by: Jakub Kicinski

net: phy: move config symbol MDIO_BUS to drivers/net/phy/Kconfig

2025-09-23T23:56:27Z

Config symbol MDIO_BUS isn't used in drivers/net/mdio. It's only used in drivers/net/phy. So move it there. Signed-off-by: Heiner Kallweit Link: https://patch.msgid.link/164ff1c6-2cf9-4e30-80fb-da4cc7165dc8@gmail.com Signed-off-by: Jakub Kicinski

net: phy: micrel: Update Kconfig help text

2025-09-13T00:34:27Z

This driver by now supports 17 different Microchip (formerly known as Micrel) chips: KSZ9021, KSZ9031, KSZ9131, KSZ8001, KS8737, KSZ8021, KSZ8031, KSZ8041, KSZ8051, KSZ8061, KSZ8081, KSZ8873MLL, KSZ886X, KSZ9477, LAN8814, LAN8804 and LAN8841. Support for the VSC8201 was removed in commit 51f932c4870f ("micrel phy driver - updated(1)") Update the help text to reflect that, list families instead of models to ease future maintenance. Signed-off-by: Jonas Rebmann Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/20250911-micrel-kconfig-v2-1-e8f295059050@pengutronix.de Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2025-09-12T00:40:13Z

Cross-merge networking fixes after downstream PR (net-6.17-rc6). Conflicts: net/netfilter/nft_set_pipapo.c net/netfilter/nft_set_pipapo_avx2.c c4eaca2e1052 ("netfilter: nft_set_pipapo: don't check genbit from packetpath lookups") 84c1da7b38d9 ("netfilter: nft_set_pipapo: use avx2 algorithm for insertions too") Only trivial adjacent changes (in a doc and a Makefile). Signed-off-by: Jakub Kicinski

net: phy: NXP_TJA11XX: Update Kconfig with TJA1102 support

2025-09-09T01:24:19Z

Update the Kconfig description to indicate support for the TJA1102. Signed-off-by: Jonas Rebmann Link: https://patch.msgid.link/20250905-tja1102-kconfig-v1-1-a57e6ac4e264@pengutronix.de Signed-off-by: Jakub Kicinski

net: dsa: Move KS8995 to the DSA subsystem

2025-08-19T00:26:09Z

By reading the datasheets for the KS8995 it is obvious that this is a 100 Mbit DSA switch. Let us start the refactoring by moving it to the DSA subsystem to preserve development history. Verified that the chip still probes the same after this patch provided CONFIG_HAVE_NET_DSA, CONFIG_NET_DSA and CONFIG_DSA_KS8995 are selected. Signed-off-by: Linus Walleij Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/20250813-ks8995-to-dsa-v1-1-75c359ede3a5@linaro.org Signed-off-by: Jakub Kicinski

net: phy: add Kconfig symbol PHY_PACKAGE

2025-06-16T21:59:30Z

Only a handful of PHY drivers needs the PHY package functionality, therefore build the module only if needed. Signed-off-by: Heiner Kallweit Link: https://patch.msgid.link/42c05496-61b2-4b09-b853-3d99b3dfe95c@gmail.com Signed-off-by: Jakub Kicinski

net: phy: add driver for MaxLinear MxL86110 PHY

2025-05-27T07:36:17Z

Add support for the MaxLinear MxL86110 Gigabit Ethernet PHY, a low-power, cost-optimized transceiver supporting 10/100/1000 Mbps over twisted-pair copper, compliant with IEEE 802.3. The driver implements basic features such as: - Device initialization - RGMII interface timing configuration - Wake-on-LAN support - LED initialization and control via /sys/class/leds This driver has been tested on multiple Variscite boards, including: - VAR-SOM-MX93 (i.MX93) - VAR-SOM-MX8M-PLUS (i.MX8MP) Example boot log showing driver probe: [ 7.692101] imx-dwmac 428a0000.ethernet eth0: PHY [stmmac-0:00] driver [MXL86110 Gigabit Ethernet] (irq=POLL) Signed-off-by: Stefano Radaelli Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/20250521212821.593057-1-stefano.radaelli21@gmail.com Signed-off-by: Paolo Abeni