linux/drivers/net/phy, branch v4.19

net: phy: sfp: remove sfp_mutex's definition

2018-10-11T19:10:06Z

The sfp_mutex variable is defined but never used in this file. Not even in the commit that introduced that variable. Remove sfp_mutex, it has no purpose. Cc: Andrew Lunn Cc: Florian Fainelli Cc: "David S. Miller" Signed-off-by: Sebastian Andrzej Siewior Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: phylink: fix SFP interface autodetection

2018-10-05T08:04:12Z

When connecting SFP PHY to phylink use the detected interface. Otherwise, the link fails to come up when the configured 'phy-mode' differs from the SFP detected mode. Move most of phylink_connect_phy() into __phylink_connect_phy(), and leave phylink_connect_phy() as a wrapper. phylink_sfp_connect_phy() can now pass the SFP detected PHY interface to __phylink_connect_phy(). This fixes 1GB SFP module link up on eth3 of the Macchiatobin board that is configured in the DT to "2500base-x" phy-mode. Fixes: 9525ae83959b6 ("phylink: add phylink infrastructure") Suggested-by: Russell King Signed-off-by: Baruch Siach Signed-off-by: David S. Miller

net: phy: sfp: Fix unregistering of HWMON SFP device

2018-09-27T03:23:31Z

A HWMON device is only registered is the SFP module supports the diagnostic page and is complient to SFF8472. Don't unconditionally unregister the hwmon device when the SFP module is remove, otherwise we access data structures which don't exist. Reported-by: Florian Fainelli Fixes: 1323061a018a ("net: phy: sfp: Add HWMON support for module sensors") Signed-off-by: Andrew Lunn Tested-by: Florian Fainelli Signed-off-by: David S. Miller

net: phy: fix WoL handling when suspending the PHY

2018-09-27T03:04:11Z

Core of the problem is that phy_suspend() suspends the PHY when it should not because of WoL. phy_suspend() checks for WoL already, but this works only if the PHY driver handles WoL (what is rarely the case). Typically WoL is handled by the MAC driver. This patch uses new member wol_enabled of struct net_device as additional criteria in the check when not to suspend the PHY because of WoL. Last but not least change phy_detach() to call phy_suspend() before attached_dev is set to NULL. phy_suspend() accesses attached_dev when checking whether the MAC driver activated WoL. Fixes: f1e911d5d0df ("r8169: add basic phylib support") Fixes: e8cfd9d6c772 ("net: phy: call state machine synchronously in phy_stop") Signed-off-by: Heiner Kallweit Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

Revert "net: phy: fix WoL handling when suspending the PHY"

2018-09-27T03:01:36Z

This reverts commit e0511f6c1ccdd153cf063764e93ac177a8553c5d. I commited the wrong version of these changes. Signed-off-by: David S. Miller

net: phy: fix WoL handling when suspending the PHY

2018-09-27T03:00:16Z

Actually there's nothing wrong with the two changes marked as "Fixes", they just revealed a problem which has been existing before. After having switched r8169 to phylib it was reported that WoL from shutdown doesn't work any longer (WoL from suspend isn't affected). Reason is that during shutdown phy_disconnect()->phy_detach()-> phy_suspend() is called. A similar issue occurs when the phylib state machine calls phy_suspend() when handling state PHY_HALTED. Core of the problem is that phy_suspend() suspends the PHY when it should not due to WoL. phy_suspend() checks for WoL already, but this works only if the PHY driver handles WoL (what is rarely the case). Typically WoL is handled by the MAC driver. phylib knows about this and handles it in mdio_bus_phy_may_suspend(), but that's used only when suspending the system, not in other cases like shutdown. Therefore factor out the relevant check from mdio_bus_phy_may_suspend() to a new function phy_may_suspend() and use it in phy_suspend(). Last but not least change phy_detach() to call phy_suspend() before attached_dev is set to NULL. phy_suspend() accesses attached_dev when checking whether the MAC driver activated WoL. Fixes: f1e911d5d0df ("r8169: add basic phylib support") Fixes: e8cfd9d6c772 ("net: phy: call state machine synchronously in phy_stop") Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller

sfp: fix oops with ethtool -m

2018-09-19T03:14:19Z

If a network interface is created prior to the SFP socket being available, ethtool can request module information. This unfortunately leads to an oops: Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = (ptrval) [00000008] *pgd=7c400831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1480 Comm: ethtool Not tainted 4.19.0-rc3 #138 Hardware name: Broadcom Northstar Plus SoC PC is at sfp_get_module_info+0x8/0x10 LR is at dev_ethtool+0x218c/0x2afc Fix this by not filling in the network device's SFP bus pointer until SFP is fully bound, thereby avoiding the core calling into the SFP bus code. Fixes: ce0aa27ff3f6 ("sfp: add sfp-bus to bridge between network devices and sfp cages") Reported-by: Florian Fainelli Tested-by: Florian Fainelli Signed-off-by: Russell King Signed-off-by: David S. Miller

net: phy: sfp: Handle unimplemented hwmon limits and alarms

2018-09-04T19:22:41Z

Not all SFPs implement the registers containing sensor limits and alarms. Luckily, there is a bit indicating if they are implemented or not. Add checking for this bit, when deciding if the hwmon attributes should be visible. Fixes: 1323061a018a ("net: phy: sfp: Add HWMON support for module sensors") Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller

net: dp83640: Mark expected switch fall-throughs

2018-08-11T18:28:34Z

In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case, I replaced the code comment at the top of the switch statement with a proper "fall through" annotation for each case, which is what GCC is expecting to find. Addresses-Coverity-ID: 1056542 ("Missing break in switch") Addresses-Coverity-ID: 1339579 ("Missing break in switch") Addresses-Coverity-ID: 1369526 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva Acked-by: Richard Cochran Signed-off-by: David S. Miller

net: phy: sftp: print debug message with text, not numbers

2018-08-09T21:19:20Z

Convert the state numbers, device state, etc from numbers to strings when printing debug messages. Signed-off-by: Andrew Lunn Acked-by: Florian Fainelli Signed-off-by: David S. Miller