linux/drivers/net/phy, branch v6.12

net: phylink: ensure PHY momentary link-fails are handled

2024-11-14T02:52:54Z

Normally, phylib won't notify changes in quick succession. However, as a result of commit 3e43b903da04 ("net: phy: Immediately call adjust_link if only tx_lpi_enabled changes") this is no longer true - it is now possible that phy_link_down() and phy_link_up() will both complete before phylink's resolver has run, which means it'll miss that pl->phy_state.link momentarily became false. Rename "mac_link_dropped" to be more generic "link_failed" since it will cover more than the MAC/PCS end of the link failing, and arrange to set this in phylink_phy_change() if we notice that the PHY reports that the link is down. This will ensure that we capture an EEE reconfiguration event. Fixes: 3e43b903da04 ("net: phy: Immediately call adjust_link if only tx_lpi_enabled changes") Signed-off-by: Russell King (Oracle) Reviewed-by: Oleksij Rempel Link: https://patch.msgid.link/E1tAtcW-002RBS-LB@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski

net: phy: ti: add PHY_RST_AFTER_CLK_EN flag

2024-11-06T01:46:03Z

DP83848 datasheet (section 4.7.2) indicates that the reset pin should be toggled after the clocks are running. Add the PHY_RST_AFTER_CLK_EN to make sure that this indication is respected. In my experience not having this flag enabled would lead to, on some boots, the wrong MII mode being selected if the PHY was initialized on the bootloader and was receiving data during Linux boot. Signed-off-by: Diogo Silva Reviewed-by: Andrew Lunn Fixes: 34e45ad9378c ("net: phy: dp83848: Add TI DP83848 Ethernet PHY") Link: https://patch.msgid.link/20241102151504.811306-1-paissilva@ld-100007.ds1.internal Signed-off-by: Jakub Kicinski

net: phy: dp83822: Fix reset pin definitions

2024-10-19T21:14:21Z

This change fixes a rare issue where the PHY fails to detect a link due to incorrect reset behavior. The SW_RESET definition was incorrectly assigned to bit 14, which is the Digital Restart bit according to the datasheet. This commit corrects SW_RESET to bit 15 and assigns DIG_RESTART to bit 14 as per the datasheet specifications. The SW_RESET define is only used in the phy_reset function, which fully re-initializes the PHY after the reset is performed. The change in the bit definitions should not have any negative impact on the functionality of the PHY. v2: - added Fixes tag - improved commit message Cc: stable@vger.kernel.org Fixes: 5dc39fd5ef35 ("net: phy: DP83822: Add ability to advertise Fiber connection") Signed-off-by: Alex Michel Reviewed-by: Andrew Lunn Message-ID: Signed-off-by: Andrew Lunn

net: phy: realtek: Fix MMD access on RTL8126A-integrated PHY

2024-10-09T11:43:46Z

All MMD reads return 0 for the RTL8126A-integrated PHY. Therefore phylib assumes it doesn't support EEE, what results in higher power consumption, and a significantly higher chip temperature in my case. To fix this split out the PHY driver for the RTL8126A-integrated PHY and set the read_mmd/write_mmd callbacks to read from vendor-specific registers. Fixes: 5befa3728b85 ("net: phy: realtek: add support for RTL8126A-integrated 5Gbps PHY") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller

net: phy: Remove LED entry from LEDs list on unregister

2024-10-08T00:15:50Z

Commit c938ab4da0eb ("net: phy: Manual remove LEDs to ensure correct ordering") correctly fixed a problem with using devm_ but missed removing the LED entry from the LEDs list. This cause kernel panic on specific scenario where the port for the PHY is torn down and up and the kmod for the PHY is removed. On setting the port down the first time, the assosiacted LEDs are correctly unregistered. The associated kmod for the PHY is now removed. The kmod is now added again and the port is now put up, the associated LED are registered again. On putting the port down again for the second time after these step, the LED list now have 4 elements. With the first 2 already unregistered previously and the 2 new one registered again. This cause a kernel panic as the first 2 element should have been removed. Fix this by correctly removing the element when LED is unregistered. Reported-by: Daniel Golle Tested-by: Daniel Golle Cc: stable@vger.kernel.org Fixes: c938ab4da0eb ("net: phy: Manual remove LEDs to ensure correct ordering") Signed-off-by: Christian Marangi Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/20241004182759.14032-1-ansuelsmth@gmail.com Signed-off-by: Jakub Kicinski

net: phy: bcm84881: Fix some error handling paths

2024-10-04T23:19:00Z

If phy_read_mmd() fails, the error code stored in 'bmsr' should be returned instead of 'val' which is likely to be 0. Fixes: 75f4d8d10e01 ("net: phy: add Broadcom BCM84881 PHY driver") Signed-off-by: Christophe JAILLET Link: https://patch.msgid.link/3e1755b0c40340d00e089d6adae5bca2f8c79e53.1727982168.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski

net: phy: aquantia: remove usage of phy_set_max_speed

2024-10-03T23:16:03Z

Remove the use of phy_set_max_speed in phy driver as the function is mainly used in MAC driver to set the max speed. Instead use get_features to fix up Phy PMA capabilities for AQR111, AQR111B0, AQR114C and AQCS109 Fixes: 038ba1dc4e54 ("net: phy: aquantia: add AQR111 and AQR111B0 PHY ID") Fixes: 0974f1f03b07 ("net: phy: aquantia: remove false 5G and 10G speed ability for AQCS109") Fixes: c278ec644377 ("net: phy: aquantia: add support for AQR114C PHY ID") Link: https://lore.kernel.org/all/20240913011635.1286027-1-quic_abchauha@quicinc.com/T/ Signed-off-by: Abhishek Chauhan Reviewed-by: Russell King (Oracle) Link: https://patch.msgid.link/20241001224626.2400222-3-quic_abchauha@quicinc.com Signed-off-by: Jakub Kicinski

net: phy: aquantia: AQR115c fix up PMA capabilities

2024-10-03T23:16:03Z

AQR115c reports incorrect PMA capabilities which includes 10G/5G and also incorrectly disables capabilities like autoneg and 10Mbps support. AQR115c as per the Marvell databook supports speeds up to 2.5Gbps with autonegotiation. Fixes: 0ebc581f8a4b ("net: phy: aquantia: add support for aqr115c") Link: https://lore.kernel.org/all/20240913011635.1286027-1-quic_abchauha@quicinc.com/T/ Signed-off-by: Abhishek Chauhan Reviewed-by: Russell King (Oracle) Link: https://patch.msgid.link/20241001224626.2400222-2-quic_abchauha@quicinc.com Signed-off-by: Jakub Kicinski

net: phy: dp83869: fix memory corruption when enabling fiber

2024-10-03T22:39:47Z

When configuring the fiber port, the DP83869 PHY driver incorrectly calls linkmode_set_bit() with a bit mask (1 << 10) rather than a bit number (10). This corrupts some other memory location -- in case of arm64 the priv pointer in the same structure. Since the advertising flags are updated from supported at the end of the function the incorrect line isn't needed at all and can be removed. Fixes: a29de52ba2a1 ("net: dp83869: Add ability to advertise Fiber connection") Signed-off-by: Ingo van Lil Reviewed-by: Alexander Sverdlin Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/20241002161807.440378-1-inguin@gmx.de Signed-off-by: Jakub Kicinski

Merge tag 'net-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2024-10-03T16:44:00Z

Pull networking fixes from Paolo Abeni: "Including fixes from ieee802154, bluetooth and netfilter. Current release - regressions: - eth: mlx5: fix wrong reserved field in hca_cap_2 in mlx5_ifc - eth: am65-cpsw: fix forever loop in cleanup code Current release - new code bugs: - eth: mlx5: HWS, fixed double-free in error flow of creating SQ Previous releases - regressions: - core: avoid potential underflow in qdisc_pkt_len_init() with UFO - core: test for not too small csum_start in virtio_net_hdr_to_skb() - vrf: revert "vrf: remove unnecessary RCU-bh critical section" - bluetooth: - fix uaf in l2cap_connect - fix possible crash on mgmt_index_removed - dsa: improve shutdown sequence - eth: mlx5e: SHAMPO, fix overflow of hd_per_wq - eth: ip_gre: fix drops of small packets in ipgre_xmit Previous releases - always broken: - core: fix gso_features_check to check for both dev->gso_{ipv4_,}max_size - core: fix tcp fraglist segmentation after pull from frag_list - netfilter: nf_tables: prevent nf_skb_duplicated corruption - sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start - mac802154: fix potential RCU dereference issue in mac802154_scan_worker - eth: fec: restart PPS after link state change" * tag 'net-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (48 commits) sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start dt-bindings: net: xlnx,axi-ethernet: Add missing reg minItems doc: net: napi: Update documentation for napi_schedule_irqoff net/ncsi: Disable the ncsi work before freeing the associated structure net: phy: qt2025: Fix warning: unused import DeviceId gso: fix udp gso fraglist segmentation after pull from frag_list bridge: mcast: Fail MDB get request on empty entry vrf: revert "vrf: Remove unnecessary RCU-bh critical section" net: ethernet: ti: am65-cpsw: Fix forever loop in cleanup code net: phy: realtek: Check the index value in led_hw_control_get ppp: do not assume bh is held in ppp_channel_bridge_input() selftests: rds: move include.sh to TEST_FILES net: test for not too small csum_start in virtio_net_hdr_to_skb() net: gso: fix tcp fraglist segmentation after pull from frag_list ipv4: ip_gre: Fix drops of small packets in ipgre_xmit net: stmmac: dwmac4: extend timeout for VLAN Tag register busy bit check net: add more sanity checks to qdisc_pkt_len_init() net: avoid potential underflow in qdisc_pkt_len_init() with UFO net: ethernet: ti: cpsw_ale: Fix warning on some platforms net: microchip: Make FDMA config symbol invisible ...