linux/drivers/net/phy, branch v6.3

net: phy: nxp-c45-tja11xx: add remove callback

2023-04-11T13:28:31Z

Unregister PTP clock when the driver is removed. Purge the RX and TX skb queues. Fixes: 514def5dd339 ("phy: nxp-c45-tja11xx: add timestamping support") CC: stable@vger.kernel.org # 5.15+ Signed-off-by: Radu Pirea (OSS) Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20230406095904.75456-1-radu-nicolae.pirea@oss.nxp.com Signed-off-by: Paolo Abeni

net: sfp: avoid EEPROM read of absent SFP module

2023-04-09T15:01:28Z

If SFP module is not present, it is sensible to fail sfp_module_eeprom() and sfp_module_eeprom_by_page() early to avoid excessive I2C transfers which are garanteed to fail. Suggested-by: Andrew Lunn Signed-off-by: Ivan Bornyakov Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: sfp: initialize sfp->i2c_block_size at sfp allocation

2023-04-09T15:01:28Z

sfp->i2c_block_size is initialized at SFP module insertion in sfp_sm_mod_probe(). Because of that, if SFP module was never inserted since boot, sfp_read() call will lead to zero-length I2C read attempt, and not all I2C controllers are happy with zero-length reads. One way to issue sfp_read() on empty SFP cage is to execute ethtool -m. If SFP module was never plugged since boot, there will be a zero-length I2C read attempt. # ethtool -m xge0 i2c i2c-3: adapter quirk: no zero length (addr 0x0050, size 0, read) Cannot get Module EEPROM data: Operation not supported If SFP module was plugged then removed at least once, sfp->i2c_block_size will be initialized and ethtool -m will fail with different exit code and without I2C error # ethtool -m xge0 Cannot get Module EEPROM data: Remote I/O error Fix this by initializing sfp->i2_block_size at struct sfp allocation stage so no wild sfp_read() could issue zero-length I2C read. Signed-off-by: Ivan Bornyakov Fixes: 0d035bed2a4a ("net: sfp: VSOL V2801F / CarlitoxxPro CPGOS03-0490 v2.0 workaround") Cc: stable@vger.kernel.org Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: nxp-c45-tja11xx: fix unsigned long multiplication overflow

2023-04-08T02:48:34Z

Any multiplication between GENMASK(31, 0) and a number bigger than 1 will be truncated because of the overflow, if the size of unsigned long is 32 bits. Replaced GENMASK with GENMASK_ULL to make sure that multiplication will be between 64 bits values. Cc: # 5.15+ Fixes: 514def5dd339 ("phy: nxp-c45-tja11xx: add timestamping support") Signed-off-by: Radu Pirea (OSS) Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20230406095953.75622-1-radu-nicolae.pirea@oss.nxp.com Signed-off-by: Jakub Kicinski

net: sfp: add quirk enabling 2500Base-x for HG MXPD-483II

2023-04-03T09:01:17Z

The HG MXPD-483II 1310nm SFP module is meant to operate with 2500Base-X, however, in their EEPROM they incorrectly specify: Transceiver type : Ethernet: 1000BASE-LX ... BR, Nominal : 2600MBd Use sfp_quirk_2500basex for this module to allow 2500Base-X mode anyway. https://forum.banana-pi.org/t/bpi-r3-sfp-module-compatibility/14573/60 Reported-by: chowtom Tested-by: chowtom Signed-off-by: Daniel Golle Reviewed-by: Russell King (Oracle) Signed-off-by: David S. Miller

net: phylink: add phylink_expects_phy() method

2023-03-31T08:23:41Z

Provide phylink_expects_phy() to allow MAC drivers to check if it is expecting a PHY to attach to. Since fixed-linked setups do not need to attach to a PHY. Provides a boolean value as to if the MAC should expect a PHY. Returns true if a PHY is expected. Reviewed-by: Russell King (Oracle) Signed-off-by: Michael Sit Wei Hong Signed-off-by: David S. Miller

net: phy: micrel: correct KSZ9131RNX EEE capabilities and advertisement

2023-03-27T07:15:52Z

The KSZ9131RNX incorrectly shows EEE capabilities in its registers. Although the "EEE control and capability 1" (Register 3.20) is set to 0, indicating no EEE support, the "EEE advertisement 1" (Register 7.60) is set to 0x6, advertising EEE support for 1000BaseT/Full and 100BaseT/Full. This inconsistency causes PHYlib to assume there is no EEE support, preventing control over EEE advertisement, which is enabled by default. This patch resolves the issue by utilizing the ksz9477_get_features() function to correctly set the EEE capabilities for the KSZ9131RNX. This adjustment allows proper control over EEE advertisement and ensures accurate representation of the device's capabilities. Fixes: 8b68710a3121 ("net: phy: start using genphy_c45_ethtool_get/set_eee()") Reported-by: Marek Vasut Tested-by: Marek Vasut Signed-off-by: Oleksij Rempel Signed-off-by: David S. Miller

net: phy: constify fwnode_get_phy_node() fwnode argument

2023-03-27T07:12:01Z

fwnode_get_phy_node() does not motify the fwnode structure, so make the argument const, Signed-off-by: Russell King (Oracle) Reviewed-by: Simon Horman Signed-off-by: David S. Miller

net: sfp: constify sfp-bus internal fwnode uses

2023-03-27T07:12:01Z

Constify sfp-bus internal fwnode uses, since we do not modify the fwnode structures. Signed-off-by: Russell King (Oracle) Reviewed-by: Simon Horman Signed-off-by: David S. Miller

net: sfp: make sfp_bus_find_fwnode() take a const fwnode

2023-03-27T07:12:01Z

sfp_bus_find_fwnode() does not write to the fwnode, so let's make it const. Signed-off-by: Russell King (Oracle) Reviewed-by: Simon Horman Signed-off-by: David S. Miller