linux/drivers/net/wireless/intel, branch v4.20

iwlwifi: mvm: don't send GEO_TX_POWER_LIMIT to old firmwares

2018-12-17T13:15:22Z

Old firmware versions don't support this command. Sending it to any firmware before -41.ucode will crash the firmware. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201975 Fixes: 66e839030fd6 ("iwlwifi: fix wrong WGDS_WIFI_DATA_SIZE") CC: #4.19+ Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo

iwlwifi: mvm: don't use SAR Geo if basic SAR is not used

2018-11-15T21:50:59Z

We can't use SAR Geo if basic SAR is not enabled, since the SAR Geo tables define offsets in relation to the basic SAR table in use. To fix this, make iwl_mvm_sar_init() return one in case WRDS is not available, so we can skip reading WGDS entirely. Fixes: a6bff3cb19b7 ("iwlwifi: mvm: add GEO_TX_POWER_LIMIT cmd for geographic tx power table") Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Luca Coelho

iwlwifi: fix D3 debug data buffer memory leak

2018-11-15T21:50:59Z

If the driver is unloaded when D3 debug data pulling is enabled but not triggered, it doesn't release the data buffer. Fix this by adding iwl_fw_runtime_free and calling it from the relevant places. Fixes: 2d8c261511ab ("iwlwifi: add d3 debug data support") Signed-off-by: Shahar S Matityahu Signed-off-by: Luca Coelho

iwlwifi: mvm: fix regulatory domain update when the firmware starts

2018-11-15T21:50:58Z

When the firmware starts, it doesn't have any regulatory information, hence it uses the world wide limitations. The driver can feed the firmware with previous knowledge that was kept in the driver, but the firmware may still not update its internal tables. This happens when we start a BSS interface, and then the firmware can change the regulatory tables based on our location and it'll use more lenient, location specific rules. Then, if the firmware is shut down (when the interface is brought down), and then an AP interface is created, the firmware will forget the country specific rules. The host will think that we are in a certain country that may allow channels and will try to teach the firmware about our location, but the firmware may still not allow to drop the world wide limitations and apply country specific rules because it was just re-started. In this case, the firmware will reply with MCC_RESP_ILLEGAL to the MCC_UPDATE_CMD. In that case, iwlwifi needs to let the upper layers (cfg80211 / hostapd) know that the channel list they know about has been updated. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201105 Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho

iwlwifi: mvm: support sta_statistics() even on older firmware

2018-11-15T21:50:58Z

The oldest firmware supported by iwlmvm do support getting the average beacon RSSI. Enable the sta_statistics() call from mac80211 even on older firmware versions. Fixes: 33cef9256342 ("iwlwifi: mvm: support beacon statistics for BSS client") Cc: stable@vger.kernel.org # 4.2+ Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho

iwlwifi: fix wrong WGDS_WIFI_DATA_SIZE

2018-11-15T21:50:58Z

From coreboot/BIOS: Name ("WGDS", Package() { Revision, Package() { DomainType, // 0x7:WiFi ==> We miss this one. WgdsWiFiSarDeltaGroup1PowerMax1, // Group 1 FCC 2400 Max WgdsWiFiSarDeltaGroup1PowerChainA1, // Group 1 FCC 2400 A Offset WgdsWiFiSarDeltaGroup1PowerChainB1, // Group 1 FCC 2400 B Offset WgdsWiFiSarDeltaGroup1PowerMax2, // Group 1 FCC 5200 Max WgdsWiFiSarDeltaGroup1PowerChainA2, // Group 1 FCC 5200 A Offset WgdsWiFiSarDeltaGroup1PowerChainB2, // Group 1 FCC 5200 B Offset WgdsWiFiSarDeltaGroup2PowerMax1, // Group 2 EC Jap 2400 Max WgdsWiFiSarDeltaGroup2PowerChainA1, // Group 2 EC Jap 2400 A Offset WgdsWiFiSarDeltaGroup2PowerChainB1, // Group 2 EC Jap 2400 B Offset WgdsWiFiSarDeltaGroup2PowerMax2, // Group 2 EC Jap 5200 Max WgdsWiFiSarDeltaGroup2PowerChainA2, // Group 2 EC Jap 5200 A Offset WgdsWiFiSarDeltaGroup2PowerChainB2, // Group 2 EC Jap 5200 B Offset WgdsWiFiSarDeltaGroup3PowerMax1, // Group 3 ROW 2400 Max WgdsWiFiSarDeltaGroup3PowerChainA1, // Group 3 ROW 2400 A Offset WgdsWiFiSarDeltaGroup3PowerChainB1, // Group 3 ROW 2400 B Offset WgdsWiFiSarDeltaGroup3PowerMax2, // Group 3 ROW 5200 Max WgdsWiFiSarDeltaGroup3PowerChainA2, // Group 3 ROW 5200 A Offset WgdsWiFiSarDeltaGroup3PowerChainB2, // Group 3 ROW 5200 B Offset } }) When read the ACPI data to find out the WGDS, the DATA_SIZE is never matched. From the above format, it gives 19 numbers, but our driver is hardcode as 18. Fix it to pass then can parse the data into our wgds table. Then we will see: iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init Sending GEO_TX_POWER_LIMIT iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[0] Band[0]: chain A = 68 chain B = 69 max_tx_power = 54 iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[0] Band[1]: chain A = 48 chain B = 49 max_tx_power = 70 iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[1] Band[0]: chain A = 51 chain B = 67 max_tx_power = 50 iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[1] Band[1]: chain A = 69 chain B = 70 max_tx_power = 68 iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[2] Band[0]: chain A = 49 chain B = 50 max_tx_power = 48 iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[2] Band[1]: chain A = 52 chain B = 53 max_tx_power = 51 Cc: stable@vger.kernel.org # 4.12+ Fixes: a6bff3cb19b7 ("iwlwifi: mvm: add GEO_TX_POWER_LIMIT cmd for geographic tx power table") Signed-off-by: Matt Chen Signed-off-by: Luca Coelho

iwlegacy: Add a lock assertion in il4965_send_rxon_assoc()

2018-10-13T17:02:29Z

The variables il->staging.filter_flags, rxon1->filter_flags and rxon2->filter_flags need to be protected by the mutex lock il->mutex. This patch adds a lock assertion of il->mutex to check whether this lock is held. Signed-off-by: Jia-Ju Bai Acked-by: Stanislaw Gruszka Signed-off-by: Kalle Valo

iwlwifi: mvm: check return value of rs_rate_from_ucode_rate()

2018-10-13T11:48:44Z

The rs_rate_from_ucode_rate() function may return -EINVAL if the rate is invalid, but none of the callsites check for the error, potentially making us access arrays with index IWL_RATE_INVALID, which is larger than the arrays, causing an out-of-bounds access. This will trigger KASAN warnings, such as the one reported in the bugzilla issue mentioned below. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=200659 Cc: stable@vger.kernel.org Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo

iwlwifi: mvm: kill INACTIVE queue state

2018-10-08T07:49:22Z

We don't really need this state: instead of having an inactive state where we can awaken zombie queues again if needed, just keep them in their normal state unless a new queue is actually needed and there's no other way of getting one. We do this here by making the inactivity check not free queues unless instructed that we now really need to allocate one to a specific station, and in that case it'll just free the queue immediately, without doing any inactivity step inbetween. The only downside is a little bit more processing in this case, but the code complexity is lower. Additionally, this fixes a corner case: due to the way the code worked, we could only ever reuse an inactive queue if it was the reserved queue for a station, as iwl_mvm_find_free_queue() would never consider returning an inactive queue. Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho

iwlwifi: mvm: move iwl_mvm_sta_alloc_queue() down

2018-10-08T07:49:08Z

We want to call iwl_mvm_inactivity_check() from here in the next patch, so need to move the code down to be able to. Fix a minor checkpatch complaint while at it. Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho