linux/drivers/net/wireless, branch v4.11

brcmfmac: use local iftype avoiding use-after-free of virtual interface

2017-03-30T16:43:51Z

A use-after-free was found using KASAN. In brcmf_p2p_del_if() the virtual interface is removed using call to brcmf_remove_interface(). After that the virtual interface instance has been freed and should not be referenced. Solve this by storing the nl80211 iftype in local variable, which is used in a couple of places anyway. Cc: stable@vger.kernel.org # 4.10.x, 4.9.x Reported-by: Daniel J Blueman Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: Kalle Valo

rtlwifi: Fix scheduling while atomic splat

2017-03-30T16:43:01Z

Following commit cceb0a597320 ("rtlwifi: Add work queue for c2h cmd."), the following BUG is reported when rtl8723be is used: BUG: sleeping function called from invalid context at mm/slab.h:432 in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: swapper/0 CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W O 4.11.0-rc3-wl+ #276 Hardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.50 09/29/2014 Call Trace: dump_stack+0x63/0x89 ___might_sleep+0xe9/0x130 __might_sleep+0x4a/0x90 kmem_cache_alloc_trace+0x19f/0x200 ? rtl_c2hcmd_enqueue+0x3e/0x110 [rtlwifi] rtl_c2hcmd_enqueue+0x3e/0x110 [rtlwifi] rtl8723be_c2h_packet_handler+0xac/0xc0 [rtl8723be] rtl8723be_rx_command_packet+0x37/0x5c [rtl8723be] _rtl_pci_rx_interrupt+0x200/0x6b0 [rtl_pci] _rtl_pci_interrupt+0x20c/0x5d0 [rtl_pci] __handle_irq_event_percpu+0x3f/0x1d0 handle_irq_event_percpu+0x23/0x60 handle_irq_event+0x3c/0x60 handle_fasteoi_irq+0xa2/0x170 handle_irq+0x20/0x30 do_IRQ+0x48/0xd0 common_interrupt+0x89/0x89 ... Although commit cceb0a597320 converted most c2h commands to use a work queue, the Bluetooth coexistence routines can be in atomic mode when they execute such a call. Fixes: cceb0a597320 ("rtlwifi: Add work queue for c2h cmd.") Signed-off-by: Larry Finger Cc: Ping-Ke Shih Signed-off-by: Kalle Valo

iwlwifi: mvm: support ibss in dqa mode

2017-03-24T15:15:25Z

Allow working IBSS also when working in DQA mode. This is done by setting it to treat the queues the same as a BSS AP treats the queues. Fixes: 7948b87308a4 ("iwlwifi: mvm: enable dynamic queue allocation mode") Signed-off-by: Liad Kaufman Signed-off-by: Luca Coelho

iwlwifi: mvm: writing zero bytes to debugfs causes a crash

2017-03-24T15:15:25Z

This is a static analysis fix. The warning is: drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c:912 iwl_mvm_fw_dbg_collect() warn: integer overflows 'sizeof(*desc) + len' I guess this code is supposed to take a NUL character, but if we write zero bytes then it tries to write -1 characters and crashes. Fixes: c91b865cb14d ("iwlwifi: mvm: support description for user triggered fw dbg collection") Signed-off-by: Dan Carpenter Signed-off-by: Luca Coelho

iwlwifi: mvm: fix accessing fw_id_to_mac_id

2017-03-24T14:59:46Z

Access should be by rcu_dereference. Issue was found by sparse. Fixes: 65e254821cee ("iwlwifi: mvm: use firmware station PM notification for AP_LINK_PS") Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho

ath10k: fix incorrect wlan_mac_base in qca6174_regs

2017-03-20T15:11:31Z

In the 'commit ebee76f7fa46 ("ath10k: allow setting coverage class")', it inherits the design and the address offset from ath9k, but the address is not applicable to QCA6174, which leads to a random crash while doing the resume() operation, since the set_coverage_class.ops will be called from ieee80211_reconfig() when resume() (if the wow is not configured). Fix the incorrect address offset here to avoid the random crash. Verified on QCA6174/hw3.0 with firmware WLAN.RM.4.4-00022-QCARMSWPZ-2. kvalo: this also seems to fix a regression with firmware restart. Fixes: ebee76f7fa46 ("ath10k: allow setting coverage class") Cc: # v4.10 Signed-off-by: Ryan Hsu Signed-off-by: Kalle Valo

mwifiex: uninit wakeup info when removing device

2017-03-16T08:14:13Z

We manually init wakeup info, but we don't detach it on device removal. This means that if we (for example) rmmod + modprobe the driver, the device framework might return -EEXIST the second time, and we'll complain in the logs: [ 839.311881] mwifiex_pcie 0000:01:00.0: fail to init wakeup for mwifiex AFAICT, there's no other negative effect. But we can fix this by disabling wakeup on remove, similar to what a few other drivers do (e.g., the power supply framework). This code (and bug) has existed on SDIO for a while, but it got moved around and enabled for PCIe with commit 853402a00823 ("mwifiex: Enable WoWLAN for both sdio and pcie"). Signed-off-by: Brian Norris Signed-off-by: Kalle Valo

mwifiex: set adapter->dev before starting to use mwifiex_dbg()

2017-03-16T08:14:12Z

The mwifiex_dbg() log handler utilizes the struct device in adapter->dev. Without it, it decides not to print anything. As of commit 2e02b5814217 ("mwifiex: Allow mwifiex early access to device structure"), we started assigning that pointer only after we finished mwifiex_register() -- this effectively neuters any mwifiex_dbg() logging done before this point. Let's move the device assignment into mwifiex_register(). Fixes: 2e02b5814217 ("mwifiex: Allow mwifiex early access to device structure") Cc: Rajat Jain Signed-off-by: Brian Norris Signed-off-by: Kalle Valo

mwifiex: pcie: don't leak DMA buffers when removing

2017-03-16T08:14:12Z

When PCIe FLR support was added, much of the remove/release code for PCIe was migrated to ->down_dev(), but ->down_dev() is never called for device removal. Let's refactor the cleanup to be done in both cases. Also, drop the comments above mwifiex_cleanup_pcie(), because they were clearly wrong, and it's better to have clear and obvious code than to detail the code steps in comments anyway. Fixes: 4c5dae59d2e9 ("mwifiex: add PCIe function level reset support") Cc: Signed-off-by: Brian Norris Signed-off-by: Kalle Valo

iwlwifi: mvm: cleanup pending frames in DQA mode

2017-03-16T07:53:39Z

When a station is asleep, the fw will set it as "asleep". All queues that are used only by one station will be stopped by the fw. In pre-DQA mode this was relevant for aggregation queues. However, in DQA mode a queue is owned by one station only, so all queues will be stopped. As a result, we don't expect to get filtered frames back to mac80211 and don't have to maintain the entire pending_frames state logic, the same way as we do in aggregations. The correct behavior is to align DQA behavior with the aggregation queue behaviour pre-DQA: - Don't count pending frames. - Let mac80211 know we have frames in these queues so that it can properly handle trigger frames. When a trigger frame is received, mac80211 tells the driver to send frames from the queues using release_buffered_frames. The driver will tell the fw to let frames out even if the station is asleep. This is done by iwl_mvm_sta_modify_sleep_tx_count. Reported-and-tested-by: Jens Axboe Reported-by: Linus Torvalds Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo