linux/drivers/net, branch v4.14

Merge tag 'linux-can-fixes-for-4.14-20171110' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

2017-11-11T12:52:01Z

Marc Kleine-Budde says: ==================== pull-request: can 2017-11-10 this is a pull request for net/master. The first patch by Richard Schütz for the c_can driver removes the false indication to support triple sampling for d_can. Gerhard Bertelsmann's patch for the sun4i driver improves the RX overrun handling. The patch by Stephane Grosjean for the peak_canfd driver adds the PCI ids for various new PCIe/M2 interfaces. Marek Vasut's patch for the ifi driver fix transmitter delay calculation. ==================== Signed-off-by: David S. Miller

can: ifi: Fix transmitter delay calculation

2017-11-10T10:35:09Z

The CANFD transmitter delay calculation formula was updated in the latest software drop from IFI and improves the behavior of the IFI CANFD core during bitrate switching. Use the new formula to improve stability of the CANFD operation. Signed-off-by: Marek Vasut Cc: Markus Marb Cc: linux-stable Signed-off-by: Marc Kleine-Budde

can: peak: Add support for new PCIe/M2 CAN FD interfaces

2017-11-10T08:15:28Z

This adds support for the following PEAK-System CAN FD interfaces: PCAN-cPCIe FD CAN FD Interface for cPCI Serial (2 or 4 channels) PCAN-PCIe/104-Express CAN FD Interface for PCIe/104-Express (1, 2 or 4 ch.) PCAN-miniPCIe FD CAN FD Interface for PCIe Mini (1, 2 or 4 channels) PCAN-PCIe FD OEM CAN FD Interface for PCIe OEM version (1, 2 or 4 ch.) PCAN-M.2 CAN FD Interface for M.2 (1 or 2 channels) Like the PCAN-PCIe FD interface, all of these boards run the same IP Core that is able to handle CAN FD (see also http://www.peak-system.com). Signed-off-by: Stephane Grosjean Cc: linux-stable Signed-off-by: Marc Kleine-Budde

can: sun4i: handle overrun in RX FIFO

2017-11-10T08:15:28Z

SUN4Is CAN IP has a 64 byte deep FIFO buffer. If the buffer is not drained fast enough (overrun) it's getting mangled. Already received frames are dropped - the data can't be restored. Signed-off-by: Gerhard Bertelsmann Cc: linux-stable Signed-off-by: Marc Kleine-Budde

can: c_can: don't indicate triple sampling support for D_CAN

2017-11-10T08:15:28Z

The D_CAN controller doesn't provide a triple sampling mode, so don't set the CAN_CTRLMODE_3_SAMPLES flag in ctrlmode_supported. Currently enabling triple sampling is a no-op. Signed-off-by: Richard Schütz Cc: linux-stable # >= v3.6 Signed-off-by: Marc Kleine-Budde

net/mlx5e: Increase Striding RQ minimum size limit to 4 multi-packet WQEs

2017-11-10T06:39:21Z

This is to prevent the case of working with a single MPWQE (1 WQE is always reserved as RQ is linked-list). When the WQE is fully consumed, HW should still have available buffer in order not to drop packets. Fixes: 461017cb006a ("net/mlx5e: Support RX multi-packet WQE (Striding RQ)") Signed-off-by: Eugenia Emantayev Reviewed-by: Tariq Toukan Cc: kernel-team@fb.com Signed-off-by: Saeed Mahameed

net/mlx5e: Set page to null in case dma mapping fails

2017-11-10T06:39:21Z

Currently, when dma mapping fails, put_page is called, but the page is not set to null. Later, in the page_reuse treatment in mlx5e_free_rx_descs(), mlx5e_page_release() is called for the second time, improperly doing dma_unmap (for a non-mapped address) and an extra put_page. Prevent this by nullifying the page pointer when dma_map fails. Fixes: accd58833237 ("net/mlx5e: Introduce RX Page-Reuse") Signed-off-by: Inbar Karmy Reviewed-by: Tariq Toukan Cc: kernel-team@fb.com Signed-off-by: Saeed Mahameed

net/mlx5e: Fix napi poll with zero budget

2017-11-10T06:39:20Z

napi->poll can be called with budget 0, e.g. in netpoll scenarios where the caller only wants to poll TX rings (poll_one_napi@net/core/netpoll.c). The below commit changed RX polling from "while" loop to "do {} while", which caused to ignore the initial budget and handle at least one RX packet. This fixes the following warning: [ 2852.049194] mlx5e_napi_poll+0x0/0x260 [mlx5_core] exceeded budget in poll [ 2852.049195] ------------[ cut here ]------------ [ 2852.049195] WARNING: CPU: 0 PID: 25691 at net/core/netpoll.c:171 netpoll_poll_dev+0x18a/0x1a0 Fixes: 4b7dfc992514 ("net/mlx5e: Early-return on empty completion queues") Signed-off-by: Saeed Mahameed Reviewed-by: Tariq Toukan Reported-by: Martin KaFai Lau Tested-by: Martin KaFai Lau Cc: kernel-team@fb.com Signed-off-by: Saeed Mahameed

net/mlx5: Cancel health poll before sending panic teardown command

2017-11-10T06:39:20Z

After the panic teardown firmware command, health_care detects the error in PCI bus and calls the mlx5_pci_err_detected. This health_care flow is no longer needed because the panic teardown firmware command will bring down the PCI bus communication with the HCA. The solution is to cancel the health care timer and its pending workqueue request before sending panic teardown firmware command. Kernel trace: mlx5_core 0033:01:00.0: Shutdown was called mlx5_core 0033:01:00.0: health_care:154:(pid 9304): handling bad device here mlx5_core 0033:01:00.0: mlx5_handle_bad_state:114:(pid 9304): NIC state 1 mlx5_core 0033:01:00.0: mlx5_pci_err_detected was called mlx5_core 0033:01:00.0: mlx5_enter_error_state:96:(pid 9304): start mlx5_3:mlx5_ib_event:3061:(pid 9304): warning: event on port 0 mlx5_core 0033:01:00.0: mlx5_enter_error_state:104:(pid 9304): end Unable to handle kernel paging request for data at address 0x0000003f Faulting instruction address: 0xc0080000434b8c80 Fixes: 8812c24d28f4 ('net/mlx5: Add fast unload support in shutdown flow') Signed-off-by: Huy Nguyen Reviewed-by: Moshe Shemesh Signed-off-by: Saeed Mahameed

net/mlx5: Loop over temp list to release delay events

2017-11-10T06:39:20Z

list_splice_init initializing waiting_events_list after splicing it to temp list, therefore we should loop over temp list to fire the events. Fixes: 4ca637a20a52 ("net/mlx5: Delay events till mlx5 interface's add complete for pci resume") Signed-off-by: Huy Nguyen Signed-off-by: Feras Daoud Signed-off-by: Saeed Mahameed