linux/drivers/net, branch v4.19

r8169: fix NAPI handling under high load

2018-10-18T18:33:29Z

rtl_rx() and rtl_tx() are called only if the respective bits are set in the interrupt status register. Under high load NAPI may not be able to process all data (work_done == budget) and it will schedule subsequent calls to the poll callback. rtl_ack_events() however resets the bits in the interrupt status register, therefore subsequent calls to rtl8169_poll() won't call rtl_rx() and rtl_tx() - chip interrupts are still disabled. Fix this by calling rtl_rx() and rtl_tx() independent of the bits set in the interrupt status register. Both functions will detect if there's nothing to do for them. Fixes: da78dbff2e05 ("r8169: remove work from irq handler.") Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller

net: mscc: ocelot: Fix comment in ocelot_vlant_wait_for_completion()

2018-10-18T05:33:43Z

The ocelot_vlant_wait_for_completion() function is very similar to the ocelot_mact_wait_for_completion(). It seemed to have be copied but the comment was not updated, so let's fix it. Signed-off-by: Gregory CLEMENT Signed-off-by: David S. Miller

virtio_net: avoid using netif_tx_disable() for serializing tx routine

2018-10-18T05:29:30Z

Commit 713a98d90c5e ("virtio-net: serialize tx routine during reset") introduces netif_tx_disable() after netif_device_detach() in order to avoid use-after-free of tx queues. However, there are two issues. 1) Its operation is redundant with netif_device_detach() in case the interface is running. 2) In case of the interface is not running before suspending and resuming, the tx does not get resumed by netif_device_attach(). This results in losing network connectivity. It is better to use netif_tx_lock_bh()/netif_tx_unlock_bh() instead for serializing tx routine during reset. This also preserves the symmetry of netif_device_detach() and netif_device_attach(). Fixes commit 713a98d90c5e ("virtio-net: serialize tx routine during reset") Signed-off-by: Ake Koomsin Acked-by: Jason Wang Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller

mlxsw: core: Fix use-after-free when flashing firmware during init

2018-10-18T05:25:45Z

When the switch driver (e.g., mlxsw_spectrum) determines it needs to flash a new firmware version it resets the ASIC after the flashing process. The bus driver (e.g., mlxsw_pci) then registers itself again with mlxsw_core which means (among other things) that the device registers itself again with the hwmon subsystem again. Since the device was registered with the hwmon subsystem using devm_hwmon_device_register_with_groups(), then the old hwmon device (registered before the flashing) was never unregistered and was referencing stale data, resulting in a use-after free. Fix by removing reliance on device managed APIs in mlxsw_hwmon_init(). Fixes: c86d62cc410c ("mlxsw: spectrum: Reset FW after flash") Signed-off-by: Ido Schimmel Reported-by: Alexander Petrovskiy Tested-by: Alexander Petrovskiy Reviewed-by: Petr Machata Signed-off-by: David S. Miller

r8169: re-enable MSI-X on RTL8168g

2018-10-18T05:10:33Z

Similar to d49c88d7677b ("r8169: Enable MSI-X on RTL8106e") after e9d0ba506ea8 ("PCI: Reprogram bridge prefetch registers on resume") we can safely assume that this also fixes the root cause of the issue worked around by 7c53a722459c ("r8169: don't use MSI-X on RTL8168g"). So let's revert it. Fixes: 7c53a722459c ("r8169: don't use MSI-X on RTL8168g") Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller

net: qla3xxx: Remove overflowing shift statement

2018-10-18T04:52:40Z

Clang currently warns: drivers/net/ethernet/qlogic/qla3xxx.c:384:24: warning: signed shift result (0xF00000000) requires 37 bits to represent, but 'int' only has 32 bits [-Wshift-overflow] ((ISP_NVRAM_MASK << 16) | qdev->eeprom_cmd_data)); ~~~~~~~~~~~~~~ ^ ~~ 1 warning generated. The warning is certainly accurate since ISP_NVRAM_MASK is defined as (0x000F << 16) which is then shifted by 16, resulting in 64424509440, well above UINT_MAX. Given that this is the only location in this driver where ISP_NVRAM_MASK is shifted again, it seems likely that ISP_NVRAM_MASK was originally defined without a shift and during the move of the shift to the definition, this statement wasn't properly removed (since ISP_NVRAM_MASK is used in the statenent right above this). Only the maintainers can confirm this since this statment has been here since the driver was first added to the kernel. Link: https://github.com/ClangBuiltLinux/linux/issues/127 Signed-off-by: Nathan Chancellor Signed-off-by: David S. Miller

geneve, vxlan: Don't set exceptions if skb->len < mtu

2018-10-18T04:51:13Z

We shouldn't abuse exceptions: if the destination MTU is already higher than what we're transmitting, no exception should be created. Fixes: 52a589d51f10 ("geneve: update skb dst pmtu on tx path") Fixes: a93bf0ff4490 ("vxlan: update skb dst pmtu on tx path") Signed-off-by: Stefano Brivio Reviewed-by: Sabrina Dubroca Signed-off-by: David S. Miller

geneve, vxlan: Don't check skb_dst() twice

2018-10-18T04:51:13Z

Commit f15ca723c1eb ("net: don't call update_pmtu unconditionally") avoids that we try updating PMTU for a non-existent destination, but didn't clean up cases where the check was already explicit. Drop those redundant checks. Signed-off-by: Stefano Brivio Reviewed-by: Sabrina Dubroca Signed-off-by: David S. Miller

nfp: flower: use offsets provided by pedit instead of index for ipv6

2018-10-16T06:17:25Z

Previously when populating the set ipv6 address action, we incorrectly made use of pedit's key index to determine which 32bit word should be set. We now calculate which word has been selected based on the offset provided by the pedit action. Fixes: 354b82bb320e ("nfp: add set ipv6 source and destination address") Signed-off-by: Pieter Jansen van Vuuren Reviewed-by: Jakub Kicinski Signed-off-by: David S. Miller

nfp: flower: fix multiple keys per pedit action

2018-10-16T06:17:24Z

Previously we only allowed a single header key per pedit action to change the header. This used to result in the last header key in the pedit action to overwrite previous headers. We now keep track of them and allow multiple header keys per pedit action. Fixes: c0b1bd9a8b8a ("nfp: add set ipv4 header action flower offload") Fixes: 354b82bb320e ("nfp: add set ipv6 source and destination address") Fixes: f8b7b0a6b113 ("nfp: add set tcp and udp header action flower offload") Signed-off-by: Pieter Jansen van Vuuren Reviewed-by: Jakub Kicinski Signed-off-by: David S. Miller