linux/drivers/net, branch v4.2

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2015-08-28T00:52:38Z

Pull networking fixes from David Miller: "Some straggler bug fixes here: 1) Netlink_sendmsg() doesn't check iterator type properly in mmap case, from Ken-ichirou MATSUZAWA. 2) Don't sleep in atomic context in bcmgenet driver, from Florian Fainelli. 3) The pfkey_broadcast() code patch can't actually ever use anything other than GFP_ATOMIC. And the cases that right now pass GFP_KERNEL or similar will currently trigger an RCU splat. Just use GFP_ATOMIC unconditionally. From David Ahern. 4) Fix FD bit timings handling in pcan_usb driver, from Marc Kleine-Budde. 5) Cache dst leaked in ip6_gre tunnel removal, fix from Huaibin Wang. 6) Traversal into drivers/net/ethernet/renesas should be triggered by CONFIG_NET_VENDOR_RENESAS, not a particular driver's config option. From Kazuya Mizuguchi. 7) Fix regression in handling of igmp_join errors in vxlan, from Marcelo Ricardo Leitner. 8) Make phy_{read,write}_mmd_indirect() properly take the mdio_lock mutex when programming the registers. From Russell King. 9) Fix non-forced handling in u32_destroy(), from WANG Cong. 10) Test the EVENT_NO_RUNTIME_PM flag before it is cleared in usbnet_stop(), from Eugene Shatokhin. 11) In sfc driver, don't fetch statistics firmware isn't capable of, from Bert Kenward. 12) Verify ASCONF address parameter location in SCTP, from Xin Long" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: sctp: donot reset the overall_error_count in SHUTDOWN_RECEIVE state sctp: asconf's process should verify address parameter is in the beginning sfc: only use vadaptor stats if firmware is capable net: phy: fixed: propagate fixed link values to struct usbnet: Get EVENT_NO_RUNTIME_PM bit before it is cleared drivers: net: xgene: fix: Oops in linkwatch_fire_event cls_u32: complete the check for non-forced case in u32_destroy() net: fec: use reinit_completion() in mdio accessor functions net: phy: add locking to phy_read_mmd_indirect()/phy_write_mmd_indirect() vxlan: re-ignore EADDRINUSE from igmp_join net: compile renesas directory if NET_VENDOR_RENESAS is configured ip6_gre: release cached dst on tunnel removal phylib: Make PHYs children of their MDIO bus, not the bus' parent. can: pcan_usb: don't provide CAN FD bittimings by non-FD adapters net: Fix RCU splat in af_key net: bcmgenet: fix uncleaned dma flags net: bcmgenet: Avoid sleeping in bcmgenet_timeout netlink: mmap: fix tx type check

sfc: only use vadaptor stats if firmware is capable

2015-08-27T18:27:01Z

Some of the stats handling code differs based on SR-IOV support, and SRIOV support is only available if full-featured firmware is used. Do not use vadaptor stats if firmware mode is not set to full-featured. Signed-off-by: Shradha Shah Signed-off-by: David S. Miller

net: phy: fixed: propagate fixed link values to struct

2015-08-27T18:24:49Z

The fixed link values parsed from the device tree are stored in the struct fixed_phy member status. The struct phy_device members speed, duplex were not updated. Signed-off-by: Madalin Bucur Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

usbnet: Get EVENT_NO_RUNTIME_PM bit before it is cleared

2015-08-26T02:44:13Z

It is needed to check EVENT_NO_RUNTIME_PM bit of dev->flags in usbnet_stop(), but its value should be read before it is cleared when dev->flags is set to 0. The problem was spotted and the fix was provided by Oliver Neukum . Signed-off-by: Eugene Shatokhin Acked-by: Oliver Neukum Signed-off-by: David S. Miller

drivers: net: xgene: fix: Oops in linkwatch_fire_event

2015-08-26T00:05:44Z

[ 1065.801569] Internal error: Oops: 96000006 [#1] SMP ... [ 1065.866655] Hardware name: AppliedMicro Mustang/Mustang, BIOS 1.1.0 Apr 22 2015 [ 1065.873937] Workqueue: events_power_efficient phy_state_machine [ 1065.879837] task: fffffe01de105e80 ti: fffffe00bcf18000 task.ti: fffffe00bcf18000 [ 1065.887288] PC is at linkwatch_fire_event+0xac/0xc0 [ 1065.892141] LR is at linkwatch_fire_event+0xa0/0xc0 [ 1065.896995] pc : [] lr : [] pstate: 200001c5 [ 1065.904356] sp : fffffe00bcf1bd00 ... [ 1066.196813] Call Trace: [ 1066.199248] [] linkwatch_fire_event+0xac/0xc0 [ 1066.205140] [] netif_carrier_off+0x54/0x64 [ 1066.210773] [] phy_state_machine+0x120/0x3bc [ 1066.216578] [] process_one_work+0x15c/0x3a8 [ 1066.222296] [] worker_thread+0x134/0x470 [ 1066.227757] [] kthread+0xe0/0xf8 [ 1066.232525] Code: 97f65ee9 f9420660 d538d082 8b000042 (885f7c40) The fix is to call phy_disconnect() from xgene_enet_mdio_remove, which in turn call cancel_delayed_work_sync(). Signed-off-by: Iyappan Subramanian Signed-off-by: David S. Miller

net: fec: use reinit_completion() in mdio accessor functions

2015-08-25T23:33:16Z

Rather than re-initialising the entire completion on every mdio access, use reinit_completion() which only resets the completion count. This avoids possible reinitialisation of the contained spinlock and waitqueue while they may be in use (eg, mid-completion.) Such an event could occur if there's a long delay in interrupt handling causing the mdio accessor to time out, then a second access comes in while the interrupt handler on a different CPU has called complete(). Another scenario where this has been observed is while locking has been missing at the phy layer, allowing concurrent attempts to access the MDIO bus. Signed-off-by: Russell King Signed-off-by: David S. Miller

net: phy: add locking to phy_read_mmd_indirect()/phy_write_mmd_indirect()

2015-08-25T23:30:46Z

The phy layer is missing locking for the above two functions - it has been observed that two threads (userspace and the phy worker thread) can race, entering the bus ->write or ->read functions simultaneously. This causes the FEC driver to initialise a completion while another thread is waiting on it or while the interrupt is calling complete() on it, which causes spinlock unlock-without-lock, spinlock lockups, and completion timeouts. Fixes: a59a4d192 ("phy: add the EEE support and the way to access to the MMD registers.") Fixes: 0c1d77dfb ("net: libphy: Add phy specific function to access mmd phy registers") Signed-off-by: Russell King Acked-by: Florian Fainelli Signed-off-by: David S. Miller

vxlan: re-ignore EADDRINUSE from igmp_join

2015-08-25T23:24:35Z

Before 56ef9c909b40[1] it used to ignore all errors from igmp_join(). That commit enhanced that and made it error out whatever error happened with igmp_join(), but that's not good because when using multicast groups vxlan will try to join it multiple times if the socket is reused and then the 2nd and further attempts will fail with EADDRINUSE. As we don't track to which groups the socket is already subscribed, it's okay to just ignore that error. Fixes: 56ef9c909b40 ("vxlan: Move socket initialization to within rtnl scope") Reported-by: John Nielsen Signed-off-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller

Merge tag 'linux-can-fixes-for-4.2-20150825' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

2015-08-25T23:12:45Z

Marc Kleine-Budde says: ==================== this is the updated pull request of one patch by me for the peak_usb driver. It fixes the driver, so that non FD adapters don't provide CAN FD bittimings. ==================== Signed-off-by: David S. Miller

net: compile renesas directory if NET_VENDOR_RENESAS is configured

2015-08-25T23:03:54Z

Currently the renesas ethernet driver directory is compiled if SH_ETH is configured rather than NET_VENDOR_RENESAS. Although incorrect that was quite harmless as until recently as SH_ETH configured the only driver in the renesas directory. However, as of c156633f1353 ("Renesas Ethernet AVB driver proper") the renesas directory includes another driver, configured by RAVB, and it makes little sense for it to have a hidden dependency on SH_ETH. Signed-off-by: Kazuya Mizuguchi [horms: rewrote changelog] Signed-off-by: Simon Horman Signed-off-by: David S. Miller