linux/drivers/net, branch v4.7

net/mlx5e: Fix del vxlan port command buffer memset

2016-07-20T22:29:50Z

memset the command buffers rather than the pointers to them. Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller

net/mlx4_en: Add resilience in low memory systems

2016-07-19T23:44:11Z

This patch fixes the lost of Ethernet port on low memory system, when driver frees its resources and fails to allocate new resources. Issue could happen while changing number of channels, rings size or changing the timestamp configuration. This fix is necessary because of removing vmap use in the code. When vmap was in use driver could allocate non-contiguous memory and make it contiguous with vmap. Now it could fail to allocate a large chunk of contiguous memory and lose the port. Current code tries to allocate new resources and then upon success frees the old resources. Fixes: 73898db04301 ('net/mlx4: Avoid wrong virtual mappings') Signed-off-by: Eugenia Emantayev Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller

net/mlx4_en: Move filters cleanup to a proper location

2016-07-19T23:44:11Z

Filters cleanup should be done once before destroying net device, since filters list is contained in the private data. Fixes: 1eb8c695bda9 ('net/mlx4_en: Add accelerated RFS support') Signed-off-by: Eugenia Emantayev Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller

net: cavium: liquidio: Avoid dma_unmap_single on uninitialized ndata

2016-07-17T05:06:00Z

The label lio_xmit_failed is used 3 times through liquidio_xmit() but it always makes a call to dma_unmap_single() using potentially uninitialized variables from "ndata" variable. Out of the 3 gotos, 2 run after ndata has been initialized, and had a prior dma_map_single() call. Fix this by adding a new error label: lio_xmit_dma_failed which does this dma_unmap_single() and then processed with the lio_xmit_failed fallthrough. Fixes: f21fb3ed364bb ("Add support of Cavium Liquidio ethernet adapters") Reported-by: coverity (CID 1309740) Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

net: nb8800: Fix SKB leak in nb8800_receive()

2016-07-17T05:06:00Z

In case nb8800_receive() fails to allocate a fragment, we would leak the SKB freshly allocated and just return, instead, free it. Reported-by: coverity (CID 1341750) Signed-off-by: Florian Fainelli Acked-by: Mans Rullgard Signed-off-by: David S. Miller

et131x: Fix logical vs bitwise check in et131x_tx_timeout()

2016-07-17T05:04:19Z

We should be using a logical check here instead of a bitwise operation to check if the device is closed already in et131x_tx_timeout(). Reported-by: coverity (CID 146498) Fixes: 38df6492eb511 ("et131x: Add PCIe gigabit ethernet driver et131x to drivers/net") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

net: bgmac: Fix infinite loop in bgmac_dma_tx_add()

2016-07-15T23:03:47Z

Nothing is decrementing the index "i" while we are cleaning up the fragments we could not successful transmit. Fixes: 9cde94506eacf ("bgmac: implement scatter/gather support") Reported-by: coverity (CID 1352048) Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

mlxsw: spectrum: Prevent invalid ingress buffer mapping

2016-07-15T21:49:51Z

Packets entering the switch are mapped to a Switch Priority (SP) according to their PCP value (untagged frames are mapped to SP 0). The packets are classified to a priority group (PG) buffer in the port's headroom according to their SP. The switch maintains another mapping (SP to IEEE priority), which is used to generate PFC frames for lossless PGs. This mapping is initialized to IEEE = SP % 8. Therefore, when mapping SP 'x' to PG 'y' we create a situation in which an IEEE priority is mapped to two different PGs: IEEE 'x' ---> SP 'x' ---> PG 'y' IEEE 'x' ---> SP 'x + 8' ---> PG '0' (default) Which is invalid, as a flow can use only one PG buffer. Fix this by mapping both SP 'x' and 'x + 8' to the same PG buffer. Fixes: 8e8dfe9fdf06 ("mlxsw: spectrum: Add IEEE 802.1Qaz ETS support") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller

mlxsw: spectrum: Prevent overwrite of DCB capability fields

2016-07-15T21:49:51Z

The number of supported traffic classes that can have ETS and PFC simultaneously enabled is not subject to user configuration, so make sure we always initialize them to the correct values following a set operation. Fixes: 8e8dfe9fdf06 ("mlxsw: spectrum: Add IEEE 802.1Qaz ETS support") Fixes: d81a6bdb87ce ("mlxsw: spectrum: Add IEEE 802.1Qbb PFC support") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller

mlxsw: spectrum: Don't emit errors when PFC is disabled

2016-07-15T21:49:51Z

We can't have PAUSE frames and PFC both enabled on the same port, but the fact that ieee_setpfc() was called doesn't necessarily mean PFC is enabled. Only emit errors when PAUSE frames and PFC are enabled simultaneously. Fixes: d81a6bdb87ce ("mlxsw: spectrum: Add IEEE 802.1Qbb PFC support") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller