linux/drivers/net, branch v5.6

r8169: fix PHY driver check on platforms w/o module softdeps

2020-03-27T22:56:34Z

On Android/x86 the module loading infrastructure can't deal with softdeps. Therefore the check for presence of the Realtek PHY driver module fails. mdiobus_register() will try to load the PHY driver module, therefore move the check to after this call and explicitly check that a dedicated PHY driver is bound to the PHY device. Fixes: f32593773549 ("r8169: check that Realtek PHY driver module is loaded") Reported-by: Chih-Wei Huang Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller

net: ks8851-ml: Fix IO operations, again

2020-03-27T03:20:19Z

This patch reverts 58292104832f ("net: ks8851-ml: Fix 16-bit IO operation") and edacb098ea9c ("net: ks8851-ml: Fix 16-bit data access"), because it turns out these were only necessary due to buggy hardware. This patch adds a check for such a buggy hardware to prevent any such mistakes again. While working further on the KS8851 driver, it came to light that the KS8851-16MLL is capable of switching bus endianness by a hardware strap, EESK pin. If this strap is incorrect, the IO accesses require such endian swapping as is being reverted by this patch. Such swapping also impacts the performance significantly. Hence, in addition to removing it, detect that the hardware is broken, report to user, and fail to bind with such hardware. Fixes: 58292104832f ("net: ks8851-ml: Fix 16-bit IO operation") Fixes: edacb098ea9c ("net: ks8851-ml: Fix 16-bit data access") Signed-off-by: Marek Vasut Cc: David S. Miller Cc: Lukas Wunner Cc: Petr Stetiar Cc: YueHaibing Signed-off-by: David S. Miller

mlxsw: spectrum_mr: Fix list iteration in error path

2020-03-26T19:00:45Z

list_for_each_entry_from_reverse() iterates backwards over the list from the current position, but in the error path we should start from the previous position. Fix this by using list_for_each_entry_continue_reverse() instead. This suppresses the following error from coccinelle: drivers/net/ethernet/mellanox/mlxsw//spectrum_mr.c:655:34-38: ERROR: invalid reference to the index variable of the iterator on line 636 Fixes: c011ec1bbfd6 ("mlxsw: spectrum: Add the multicast routing offloading logic") Signed-off-by: Ido Schimmel Reviewed-by: Jiri Pirko Signed-off-by: David S. Miller

qlcnic: Fix bad kzalloc null test

2020-03-26T18:44:22Z

In qlcnic_83xx_get_reset_instruction_template, the variable of null test is bad, so correct it. Signed-off-by: Xu Wang Signed-off-by: David S. Miller

Merge tag 'wireless-drivers-2020-03-25' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

2020-03-25T20:12:26Z

Kalle Valo says: ==================== wireless-drivers fixes for v5.6 Fourth, and last, set of fixes for v5.6. Just two important fixes to iwlwifi regressions. iwlwifi * fix GEO_TX_POWER_LIMIT command on certain devices which caused firmware to crash during initialisation * add back device ids for three devices which were accidentally removed ==================== Signed-off-by: David S. Miller

net: Fix CONFIG_NET_CLS_ACT=n and CONFIG_NFT_FWD_NETDEV={y, m} build

2020-03-25T19:24:33Z

net/netfilter/nft_fwd_netdev.c: In function ‘nft_fwd_netdev_eval’: net/netfilter/nft_fwd_netdev.c:32:10: error: ‘struct sk_buff’ has no member named ‘tc_redirected’ pkt->skb->tc_redirected = 1; ^~ net/netfilter/nft_fwd_netdev.c:33:10: error: ‘struct sk_buff’ has no member named ‘tc_from_ingress’ pkt->skb->tc_from_ingress = 1; ^~ To avoid a direct dependency with tc actions from netfilter, wrap the redirect bits around CONFIG_NET_REDIRECT and move helpers to include/linux/skbuff.h. Turn on this toggle from the ifb driver, the only existing client of these bits in the tree. This patch adds skb_set_redirected() that sets on the redirected bit on the skbuff, it specifies if the packet was redirect from ingress and resets the timestamp (timestamp reset was originally missing in the netfilter bugfix). Fixes: bcfabee1afd99484 ("netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress") Reported-by: noreply@ellerman.id.au Reported-by: Geert Uytterhoeven Signed-off-by: Pablo Neira Ayuso Signed-off-by: David S. Miller

net: ena: Add PCI shutdown handler to allow safe kexec

2020-03-25T19:03:29Z

Currently ENA only provides the PCI remove() handler, used during rmmod for example. This is not called on shutdown/kexec path; we are potentially creating a failure scenario on kexec: (a) Kexec is triggered, no shutdown() / remove() handler is called for ENA; instead pci_device_shutdown() clears the master bit of the PCI device, stopping all DMA transactions; (b) Kexec reboot happens and the device gets enabled again, likely having its FW with that DMA transaction buffered; then it may trigger the (now invalid) memory operation in the new kernel, corrupting kernel memory area. This patch aims to prevent this, by implementing a shutdown() handler quite similar to the remove() one - the difference being the handling of the netdev, which is unregistered on remove(), but following the convention observed in other drivers, it's only detached on shutdown(). This prevents an odd issue in AWS Nitro instances, in which after the 2nd kexec the next one will fail with an initrd corruption, caused by a wild DMA write to invalid kernel memory. The lspci output for the adapter present in my instance is: 00:05.0 Ethernet controller [0200]: Amazon.com, Inc. Elastic Network Adapter (ENA) [1d0f:ec20] Suggested-by: Gavin Shan Signed-off-by: Guilherme G. Piccoli Acked-by: Sameeh Jubran Signed-off-by: David S. Miller

Merge tag 'mlx5-fixes-2020-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux

2020-03-25T00:25:54Z

Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2020-03-24 This series introduces some fixes to mlx5 driver. From Aya, Fixes to the RX error recovery flows From Leon, Fix IB capability mask Please pull and let me know if there is any problem. For -stable v5.5 ('net/mlx5_core: Set IB capability mask1 to fix ib_srpt connection failure') For -stable v5.4 ('net/mlx5e: Fix ICOSQ recovery flow with Striding RQ') ('net/mlx5e: Do not recover from a non-fatal syndrome') ('net/mlx5e: Fix missing reset of SW metadata in Striding RQ reset') ('net/mlx5e: Enhance ICOSQ WQE info fields') The above patch ('net/mlx5e: Enhance ICOSQ WQE info fields') will fail to apply cleanly on v5.4 due to a trivial contextual conflict, but it is an important fix, do I need to do something about it or just assume Greg will know how to handle this ? ==================== Signed-off-by: David S. Miller

r8169: re-enable MSI on RTL8168c

2020-03-25T00:20:10Z

The original change fixed an issue on RTL8168b by mimicking the vendor driver behavior to disable MSI on chip versions before RTL8168d. This however now caused an issue on a system with RTL8168c, see [0]. Therefore leave MSI disabled on RTL8168b, but re-enable it on RTL8168c. [0] https://bugzilla.redhat.com/show_bug.cgi?id=1792839 Fixes: 003bd5b4a7b4 ("r8169: don't use MSI before RTL8168d") Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller

net: phy: mdio-bcm-unimac: Fix clock handling

2020-03-24T23:45:32Z

The DT binding for this PHY describes an *optional* clock property. Due to a bug in the error handling logic, we are actually ignoring this clock *all* of the time so far. Fix this by using devm_clk_get_optional() to handle this clock properly. Fixes: b78ac6ecd1b6b ("net: phy: mdio-bcm-unimac: Allow configuring MDIO clock divider") Signed-off-by: Andre Przywara Reviewed-by: Andrew Lunn Acked-by: Florian Fainelli Signed-off-by: David S. Miller