linux/drivers/ntb/test, branch v5.4

ntb: point to right memory window index

2019-09-23T21:20:27Z

second parameter of ntb_peer_mw_get_addr is pointing to wrong memory window index by passing "peer gidx" instead of "local gidx". For ex, "local gidx" value is '0' and "peer gidx" value is '1', then on peer side ntb_mw_set_trans() api is used as below with gidx pointing to local side gidx which is '0', so memroy window '0' is chosen and XLAT '0' will be programmed by peer side. ntb_mw_set_trans(perf->ntb, peer->pidx, peer->gidx, peer->inbuf_xlat, peer->inbuf_size); Now, on local side ntb_peer_mw_get_addr() is been used as below with gidx pointing to "peer gidx" which is '1', so pointing to memory window '1' instead of memory window '0'. ntb_peer_mw_get_addr(perf->ntb, peer->gidx, &phys_addr, &peer->outbuf_size); So this patch pass "local gidx" as parameter to ntb_peer_mw_get_addr(). Signed-off-by: Sanjay R Mehta Signed-off-by: Jon Mason

Merge tag 'ntb-5.3' of git://github.com/jonmason/ntb

2019-07-21T16:46:59Z

Pull NTB updates from Jon Mason: "New feature to add support for NTB virtual MSI interrupts, the ability to test and use this feature in the NTB transport layer. Also, bug fixes for the AMD and Switchtec drivers, as well as some general patches" * tag 'ntb-5.3' of git://github.com/jonmason/ntb: (22 commits) NTB: Describe the ntb_msi_test client in the documentation. NTB: Add MSI interrupt support to ntb_transport NTB: Add ntb_msi_test support to ntb_test NTB: Introduce NTB MSI Test Client NTB: Introduce MSI library NTB: Rename ntb.c to support multiple source files in the module NTB: Introduce functions to calculate multi-port resource index NTB: Introduce helper functions to calculate logical port number PCI/switchtec: Add module parameter to request more interrupts PCI/MSI: Support allocating virtual MSI interrupts ntb_hw_switchtec: Fix setup MW with failure bug ntb_hw_switchtec: Skip unnecessary re-setup of shared memory window for crosslink case ntb_hw_switchtec: Remove redundant steps of switchtec_ntb_reinit_peer() function NTB: correct ntb_dev_ops and ntb_dev comment typos NTB: amd: Silence shift wrapping warning in amd_ntb_db_vector_mask() ntb_hw_switchtec: potential shift wrapping bug in switchtec_ntb_init_sndev() NTB: ntb_transport: Ensure qp->tx_mw_dma_addr is initaliazed NTB: ntb_hw_amd: set peer limit register NTB: ntb_perf: Clear stale values in doorbell and command SPAD register NTB: ntb_perf: Disable NTB link after clearing peer XLAT registers ...

NTB: Introduce NTB MSI Test Client

2019-06-13T13:02:51Z

Introduce a tool to test NTB MSI interrupts similar to the other NTB test tools. This tool creates a debugfs directory for each NTB device with the following files: port irqX_occurrences peerX/port peerX/count peerX/trigger The 'port' file tells the user the local port number and the 'occurrences' files tell the number of local interrupts that have been received for each interrupt. For each peer, the 'port' file and the 'count' file tell you the peer's port number and number of interrupts respectively. Writing the interrupt number to the 'trigger' file triggers the interrupt handler for the peer which should increment their corresponding 'occurrences' file. The 'ready' file indicates if a peer is ready, writing to this file blocks until it is ready. The module parameter num_irqs can be used to set the number of local interrupts. By default this is 4. This is only limited by the number of unused MSI interrupts registered by the hardware (this will require support of the hardware driver) and there must be at least 2*num_irqs + 1 spads registers available. Signed-off-by: Logan Gunthorpe Cc: Dave Jiang Cc: Allen Hubbe Signed-off-by: Jon Mason

NTB: ntb_perf: Clear stale values in doorbell and command SPAD register

2019-06-13T12:58:05Z

when ntb_perf is unloaded, the command scratchpad register still retains the last initialized value of PERF_CMD_INVAL. When ntb_perf is re-loaded and reads peer command scratchpad register and it mis interprets the peer state as initialized. To avoid this, clearing the local side command scratchpad register in perf_disable_service Signed-off-by: Sanjay R Mehta Acked-by: Allen Hubbe Acked-by: Logan Gunthorpe Acked-by: Serge Semin Signed-off-by: Jon Mason

NTB: ntb_perf: Disable NTB link after clearing peer XLAT registers

2019-06-13T12:58:01Z

If ntb link disabled before clearing peer's XLAT register, the clearing won't have any effect since the link is already down. So modified the sequence so that the link is down only towards the end of the function after clearing the XLAT register Signed-off-by: Sanjay R Mehta Acked-by: Allen Hubbe Acked-by: Logan Gunthorpe Acked-by: Serge Semin Signed-off-by: Jon Mason

NTB: ntb_perf: Increased the number of message retries to 1000

2019-06-13T12:54:39Z

while waiting for the peer ntb_perf to initialize scratchpad registers, local side ntb_perf might have already exhausted the maximum number of retries which is currently set to 500. To avoid this and to give little more time to the peer ntb_perf for scratchpad initialization, increased the number of retries to 1000 Signed-off-by: Sanjay R Mehta Acked-by: Allen Hubbe Acked-by: Logan Gunthorpe Acked-by: Serge Semin Signed-off-by: Jon Mason

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

drivers: Remove explicit invocations of mmiowb()

2019-04-08T11:01:02Z

mmiowb() is now implied by spin_unlock() on architectures that require it, so there is no reason to call it from driver code. This patch was generated using coccinelle: @mmiowb@ @@ - mmiowb(); and invoked as: $ for d in drivers include/linux/qed sound; do \ spatch --include-headers --sp-file mmiowb.cocci --dir $d --in-place; done NOTE: mmiowb() has only ever guaranteed ordering in conjunction with spin_unlock(). However, pairing each mmiowb() removal in this patch with the corresponding call to spin_unlock() is not at all trivial, so there is a small chance that this change may regress any drivers incorrectly relying on mmiowb() to order MMIO writes between CPUs using lock-free synchronisation. If you've ended up bisecting to this commit, you can reintroduce the mmiowb() calls using wmb() instead, which should restore the old behaviour on all architectures other than some esoteric ia64 systems. Acked-by: Linus Torvalds Signed-off-by: Will Deacon

NTB: ntb_perf: fix cast to restricted __le32

2018-01-29T03:17:24Z

Sparse is whining about the u32 and __le32 mixed usage in the driver drivers/ntb/test/ntb_perf.c:288:21: warning: cast to restricted __le32 drivers/ntb/test/ntb_perf.c:295:37: warning: incorrect type in argument 4 (different base types) drivers/ntb/test/ntb_perf.c:295:37: expected unsigned int [unsigned] [usertype] val drivers/ntb/test/ntb_perf.c:295:37: got restricted __le32 [usertype] ... NTB hardware drivers shall accept CPU-endian data and translate it to the portable formate by internal means, so the explicit conversions are not necessary before Scratchpad/Messages API usage anymore. Fixes: b83003b3fdc1 ("NTB: ntb_perf: Add full multi-port NTB API support") Signed-off-by: Serge Semin Acked-by: Arnd Bergmann Signed-off-by: Jon Mason

ntb_perf: Fix an error code in perf_copy_chunk()

2018-01-29T03:17:24Z

We accidentally return success if dmaengine_submit() fails. The fix is to preserve the error code from dma_submit_error(). Signed-off-by: Dan Carpenter Acked-by: Serge Semin Signed-off-by: Jon Mason