linux/drivers/ntb, branch v5.7

Merge tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2020-04-03T21:25:02Z

Pull pci updates from Bjorn Helgaas: "Enumeration: - Revert sysfs "rescan" renames that broke apps (Kelsey Skunberg) - Add more 32 GT/s link speed decoding and improve the implementation (Yicong Yang) Resource management: - Add support for sizing programmable host bridge apertures and fix a related alpha Nautilus regression (Ivan Kokshaysky) Interrupts: - Add boot interrupt quirk mechanism for Xeon chipsets and document boot interrupts (Sean V Kelley) PCIe native device hotplug: - When possible, disable in-band presence detect and use PDS (Alexandru Gagniuc) - Add DMI table for devices that don't use in-band presence detection but don't advertise that correctly (Stuart Hayes) - Fix hang when powering slots up/down via sysfs (Lukas Wunner) - Fix an MSI interrupt race (Stuart Hayes) Virtualization: - Add ACS quirks for Zhaoxin devices (Raymond Pang) Error handling: - Add Error Disconnect Recover (EDR) support so firmware can report devices disconnected via DPC and we can try to recover (Kuppuswamy Sathyanarayanan) Peer-to-peer DMA: - Add Intel Sky Lake-E Root Ports B, C, D to the whitelist (Andrew Maier) ASPM: - Reduce severity of common clock config message (Chris Packham) - Clear the correct bits when enabling L1 substates, so we don't go to the wrong state (Yicong Yang) Endpoint framework: - Replace EPF linkup ops with notifier call chain and improve locking (Kishon Vijay Abraham I) - Fix concurrent memory allocation in OB address region (Kishon Vijay Abraham I) - Move PF function number assignment to EPC core to support multiple function creation methods (Kishon Vijay Abraham I) - Fix issue with clearing configfs "start" entry (Kunihiko Hayashi) - Fix issue with endpoint MSI-X ignoring BAR Indicator and Table Offset (Kishon Vijay Abraham I) - Add support for testing DMA transfers (Kishon Vijay Abraham I) - Add support for testing > 10 endpoint devices (Kishon Vijay Abraham I) - Add support for tests to clear IRQ (Kishon Vijay Abraham I) - Add common DT schema for endpoint controllers (Kishon Vijay Abraham I) Amlogic Meson PCIe controller driver: - Add DT bindings for AXG PCIe PHY, shared MIPI/PCIe analog PHY (Remi Pommarel) - Add Amlogic AXG PCIe PHY, AXG MIPI/PCIe analog PHY drivers (Remi Pommarel) Cadence PCIe controller driver: - Add Root Complex/Endpoint DT schema for Cadence PCIe (Kishon Vijay Abraham I) Intel VMD host bridge driver: - Add two VMD Device IDs that require bus restriction mode (Sushma Kalakota) Mobiveil PCIe controller driver: - Refactor and modularize mobiveil driver (Hou Zhiqiang) - Add support for Mobiveil GPEX Gen4 host (Hou Zhiqiang) Microsoft Hyper-V host bridge driver: - Add support for Hyper-V PCI protocol version 1.3 and PCI_BUS_RELATIONS2 (Long Li) - Refactor to prepare for virtual PCI on non-x86 architectures (Boqun Feng) - Fix memory leak in hv_pci_probe()'s error path (Dexuan Cui) NVIDIA Tegra PCIe controller driver: - Use pci_parse_request_of_pci_ranges() (Rob Herring) - Add support for endpoint mode and related DT updates (Vidya Sagar) - Reduce -EPROBE_DEFER error message log level (Thierry Reding) Qualcomm PCIe controller driver: - Restrict class fixup to specific Qualcomm devices (Bjorn Andersson) Synopsys DesignWare PCIe controller driver: - Refactor core initialization code for endpoint mode (Vidya Sagar) - Fix endpoint MSI-X to use correct table address (Kishon Vijay Abraham I) TI DRA7xx PCIe controller driver: - Fix MSI IRQ handling (Vignesh Raghavendra) TI Keystone PCIe controller driver: - Allow AM654 endpoint to raise MSI-X interrupt (Kishon Vijay Abraham I) Miscellaneous: - Quirk ASMedia XHCI USB to avoid "PME# from D0" defect (Kai-Heng Feng) - Use ioremap(), not phys_to_virt(), for platform ROM to fix video ROM mapping with CONFIG_HIGHMEM (Mikel Rychliski)" * tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (96 commits) misc: pci_endpoint_test: remove duplicate macro PCI_ENDPOINT_TEST_STATUS PCI: tegra: Print -EPROBE_DEFER error message at debug level misc: pci_endpoint_test: Use full pci-endpoint-test name in request_irq() misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices tools: PCI: Add 'e' to clear IRQ misc: pci_endpoint_test: Add ioctl to clear IRQ misc: pci_endpoint_test: Avoid using module parameter to determine irqtype PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interrupt PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments misc: pci_endpoint_test: Add support to get DMA option from userspace tools: PCI: Add 'd' command line option to support DMA misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation PCI: endpoint: functions/pci-epf-test: Print throughput information PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data PCI: pciehp: Fix MSI interrupt race PCI: pciehp: Fix indefinite wait on sysfs requests PCI: endpoint: Fix clearing start entry in configfs PCI: tegra: Add support for PCIe endpoint mode in Tegra194 PCI: sysfs: Revert "rescan" file renames ...

PCI/AER: Rationalize error status register clearing

2020-03-28T18:19:05Z

The AER interfaces to clear error status registers were a confusing mess: - pci_cleanup_aer_uncorrect_error_status() cleared non-fatal errors from the Uncorrectable Error Status register. - pci_aer_clear_fatal_status() cleared fatal errors from the Uncorrectable Error Status register. - pci_cleanup_aer_error_status_regs() cleared the Root Error Status register (for Root Ports), the Uncorrectable Error Status register, and the Correctable Error Status register. Rename them to make them consistent: From To ---------------------------------------- ------------------------------- pci_cleanup_aer_uncorrect_error_status() pci_aer_clear_nonfatal_status() pci_aer_clear_fatal_status() pci_aer_clear_fatal_status() pci_cleanup_aer_error_status_regs() pci_aer_clear_status() Since pci_cleanup_aer_error_status_regs() (renamed to pci_aer_clear_status()) is only used within drivers/pci/, move the declaration from to drivers/pci/pci.h. [bhelgaas: commit log, add renames] Link: https://lore.kernel.org/r/d1310a75dc3d28f7e8da4e99c45fbd3e60fe238e.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan Signed-off-by: Bjorn Helgaas

NTB: add pci shutdown handler for AMD NTB

2020-03-13T14:04:20Z

The PCI shutdown handler is invoked in response to system reboot or shutdown. A data transfer might still be in flight when this happens. So the very first action we take here is to send a link down notification, so that any pending data transfer is terminated. Rest of the actions are same as that of PCI remove handler. Signed-off-by: Arindam Nath Signed-off-by: Jon Mason

NTB: send DB event when driver is loaded or un-loaded

2020-03-13T14:04:20Z

When the driver on the local side is loaded, it sets SIDE_READY bit in SIDE_INFO register. Likewise, when it is un-loaded, it clears the bit. Also just after being loaded, the driver polls for peer SIDE_READY bit to be set. Since that bit is set when the peer side driver has loaded, the polling on local side breaks as soon as this condition is met. But the situation is different when the driver is un-loaded. Since the polling has already been stopped as mentioned before, if the peer side driver gets un-loaded, the driver on the local side is not notified implicitly. So, we improvise using existing doorbell mechanism. We reserve the highest order bit of the DB register to send a notification to peer when the driver on local side is un-loaded. This also means that now we are one short of 16 DB events and that is taken care of in the valid DB mask. Signed-off-by: Arindam Nath Signed-off-by: Jon Mason

NTB: remove redundant setting of DB valid mask

2020-03-13T14:04:20Z

db_valid_mask is set at two places, once within amd_init_ntb(), and again within amd_init_dev(). Since amd_init_ntb() is actually called from amd_init_dev(), setting db_valid_mask from former does not really make sense. So remove it. Signed-off-by: Arindam Nath Signed-off-by: Jon Mason

NTB: return link up status correctly for PRI and SEC

2020-03-13T14:04:20Z

Since NTB connects two physically separate systems, there can be scenarios where one system goes down while the other one remains active. In case of NTB primary, if the NTB secondary goes down, a Link-Down event is received. For the NTB secondary, if the NTB primary goes down, the PCIe hotplug mechanism ensures that the driver on the secondary side is also unloaded. But there are other scenarios to consider as well, when suppose the physical link remains active, but the driver on primary or secondary side is loaded or un-loaded. When the driver is loaded, on either side, it sets SIDE_READY bit(bit-1) of SIDE_INFO register. Similarly, when the driver is un-loaded, it resets the same bit. We consider the NTB link to be up and operational only when the driver on both sides of link are loaded and ready. But we also need to take account of Link Up and Down events which signify the physical link status. So amd_link_is_up() is modified to take care of the above scenarios. Signed-off-by: Arindam Nath Signed-off-by: Jon Mason

NTB: add helper functions to set and clear sideinfo

2020-03-13T14:04:20Z

We define two new helper functions to set and clear sideinfo registers respectively. These functions take an additional boolean parameter which signifies whether we want to set/clear the sideinfo register of the peer(true) or local host(false). Signed-off-by: Arindam Nath Signed-off-by: Jon Mason

NTB: move ntb_ctrl handling to init and deinit

2020-03-13T14:04:20Z

It does not really make sense to enable or disable the bits of NTB_CTRL register only during enable and disable link callbacks. They should be done independent of these callbacks. The correct placement for that is during the amd_init_side_info() and amd_deinit_side_info() functions, which are invoked during probe and remove respectively. Signed-off-by: Arindam Nath Signed-off-by: Jon Mason

NTB: handle link up, D0 and D3 events correctly

2020-03-13T14:04:20Z

Just like for Link-Down event, Link-Up and D3 events are also mutually exclusive to Link-Down and D0 events respectively. So we clear the bitmasks in peer_sta depending on event type. Signed-off-by: Arindam Nath Signed-off-by: Jon Mason

NTB: handle link down event correctly

2020-03-13T14:04:20Z

Link-Up and Link-Down are mutually exclusive events. So when we receive a Link-Down event, we should also clear the bitmask for Link-Up event in peer_sta. Signed-off-by: Arindam Nath Signed-off-by: Jon Mason