linux/drivers/nvme, branch v6.12

Merge tag 'block-6.12-20241108' of git://git.kernel.dk/linux

2024-11-09T20:55:32Z

Pull block fix from Jens Axboe: "Single fix for an issue triggered with PROVE_RCU=y, with nvme using the wrong iterators for an SRCU protected list" * tag 'block-6.12-20241108' of git://git.kernel.dk/linux: nvme/host: Fix RCU list traversal to use SRCU primitive

nvme/host: Fix RCU list traversal to use SRCU primitive

2024-11-04T21:25:41Z

The code currently uses list_for_each_entry_rcu() while holding an SRCU lock, triggering false positive warnings with CONFIG_PROVE_RCU=y enabled: drivers/nvme/host/core.c:3770 RCU-list traversed in non-reader section!! While the list is properly protected by SRCU lock, the code uses the wrong list traversal primitive. Replace list_for_each_entry_rcu() with list_for_each_entry_srcu() to correctly indicate SRCU-based protection and eliminate the false warning. Fixes: be647e2c76b2 ("nvme: use srcu for iterating namespace list") Signed-off-by: Breno Leitao Reviewed-by: Christoph Hellwig Signed-off-by: Keith Busch

Merge tag 'block-6.12-20241101' of git://git.kernel.dk/linux

2024-11-01T23:41:55Z

Pull block fixes from Jens Axboe: - Fixup for a recent blk_rq_map_user_bvec() patch - NVMe pull request via Keith: - Spec compliant identification fix (Keith) - Module parameter to enable backward compatibility on unusual namespace formats (Keith) - Target double free fix when using keys (Vitaliy) - Passthrough command error handling fix (Keith) * tag 'block-6.12-20241101' of git://git.kernel.dk/linux: nvme: re-fix error-handling for io_uring nvme-passthrough nvmet-auth: assign dh_key to NULL after kfree_sensitive nvme: module parameter to disable pi with offsets block: fix queue limits checks in blk_rq_map_user_bvec for real nvme: enhance cns version checking

nvme: re-fix error-handling for io_uring nvme-passthrough

2024-10-30T14:19:18Z

This was previously fixed with commit 1147dd0503564fa0e0348 ("nvme: fix error-handling for io_uring nvme-passthrough"), but the change was mistakenly undone in a later commit. Fixes: d6aacee9255e7f ("nvme: use bio_integrity_map_user") Cc: stable@vger.kernel.org Reported-by: Jens Axboe Reviewed-by: Christoph Hellwig Reviewed-by: Anuj Gupta Reviewed-by: Kanchan Joshi Signed-off-by: Keith Busch

nvmet-auth: assign dh_key to NULL after kfree_sensitive

2024-10-30T14:19:18Z

ctrl->dh_key might be used across multiple calls to nvmet_setup_dhgroup() for the same controller. So it's better to nullify it after release on error path in order to avoid double free later in nvmet_destroy_auth(). Found by Linux Verification Center (linuxtesting.org) with Svace. Fixes: 7a277c37d352 ("nvmet-auth: Diffie-Hellman key exchange support") Cc: stable@vger.kernel.org Signed-off-by: Vitaliy Shevtsov Reviewed-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Signed-off-by: Keith Busch

nvme: module parameter to disable pi with offsets

2024-10-30T14:19:18Z

A recent commit enables integrity checks for formats the previous kernel versions registered with the "nop" integrity profile. This means namespaces using that format become unreadable when upgrading the kernel past that commit. Introduce a module parameter to restore the "nop" integrity profile so that storage can be readable once again. This could be a boot device, so the setting needs to happen at module load time. Fixes: 921e81db524d17 ("nvme: allow integrity when PI is not in first bytes") Reported-by: David Wei Reviewed-by: Christoph Hellwig Reviewed-by: Kanchan Joshi Reviewed-by: Chaitanya Kulkarni Signed-off-by: Keith Busch

nvme: enhance cns version checking

2024-10-22T16:11:03Z

The number of CNS bits in the command is specific to the nvme spec version compliance. The existing check is not sufficient for possible CNS values the driver uses that may create confusion between host and device, so enhance the check to consider the version and desired CNS value. Reviewed-by: Sagi Grimberg Reviewed-by: Christoph Hellwig Signed-off-by: Keith Busch

Merge tag 'block-6.12-20241018' of git://git.kernel.dk/linux

2024-10-18T22:53:00Z

Pull block fixes from Jens Axboe: - NVMe pull request via Keith: - Fix target passthrough identifier (Nilay) - Fix tcp locking (Hannes) - Replace list with sbitmap for tracking RDMA rsp tags (Guixen) - Remove unnecessary fallthrough statements (Tokunori) - Remove ready-without-media support (Greg) - Fix multipath partition scan deadlock (Keith) - Fix concurrent PCI reset and remove queue mapping (Maurizio) - Fabrics shutdown fixes (Nilay) - Fix for a kerneldoc warning (Keith) - Fix a race with blk-rq-qos and wakeups (Omar) - Cleanup of checking for always-set tag_set (SurajSonawane2415) - Fix for a crash with CPU hotplug notifiers (Ming) - Don't allow zero-copy ublk on unprivileged device (Ming) - Use array_index_nospec() for CDROM (Josh) - Remove dead code in drbd (David) - Tweaks to elevator loading (Breno) * tag 'block-6.12-20241018' of git://git.kernel.dk/linux: cdrom: Avoid barrier_nospec() in cdrom_ioctl_media_changed() nvme: use helper nvme_ctrl_state in nvme_keep_alive_finish function nvme: make keep-alive synchronous operation nvme-loop: flush off pending I/O while shutting down loop controller nvme-pci: fix race condition between reset and nvme_dev_disable() ublk: don't allow user copy for unprivileged device blk-rq-qos: fix crash on rq_qos_wait vs. rq_qos_wake_function race nvme-multipath: defer partition scanning blk-mq: setup queue ->tag_set before initializing hctx elevator: Remove argument from elevator_find_get elevator: do not request_module if elevator exists drbd: Remove unused conn_lowest_minor nvme: disable CC.CRIME (NVME_CC_CRIME) nvme: delete unnecessary fallthru comment nvmet-rdma: use sbitmap to replace rsp free list block: Fix elevator_get_default() checking for NULL q->tag_set nvme: tcp: avoid race between queue_lock lock and destroy nvmet-passthru: clear EUID/NGUID/UUID while using loop target block: fix blk_rq_map_integrity_sg kernel-doc

nvme: use helper nvme_ctrl_state in nvme_keep_alive_finish function

2024-10-17T18:07:37Z

We no more need acquiring ctrl->lock before accessing the NVMe controller state and instead we can now use the helper nvme_ctrl_state. So replace the use of ctrl->lock from nvme_keep_alive_finish function with nvme_ctrl_state call. Reviewed-by: Christoph Hellwig Signed-off-by: Nilay Shroff Signed-off-by: Keith Busch

nvme: make keep-alive synchronous operation

2024-10-17T18:07:37Z

The nvme keep-alive operation, which executes at a periodic interval, could potentially sneak in while shutting down a fabric controller. This may lead to a race between the fabric controller admin queue destroy code path (invoked while shutting down controller) and hw/hctx queue dispatcher called from the nvme keep-alive async request queuing operation. This race could lead to the kernel crash shown below: Call Trace: autoremove_wake_function+0x0/0xbc (unreliable) __blk_mq_sched_dispatch_requests+0x114/0x24c blk_mq_sched_dispatch_requests+0x44/0x84 blk_mq_run_hw_queue+0x140/0x220 nvme_keep_alive_work+0xc8/0x19c [nvme_core] process_one_work+0x200/0x4e0 worker_thread+0x340/0x504 kthread+0x138/0x140 start_kernel_thread+0x14/0x18 While shutting down fabric controller, if nvme keep-alive request sneaks in then it would be flushed off. The nvme_keep_alive_end_io function is then invoked to handle the end of the keep-alive operation which decrements the admin->q_usage_counter and assuming this is the last/only request in the admin queue then the admin->q_usage_counter becomes zero. If that happens then blk-mq destroy queue operation (blk_mq_destroy_ queue()) which could be potentially running simultaneously on another cpu (as this is the controller shutdown code path) would forward progress and deletes the admin queue. So, now from this point onward we are not supposed to access the admin queue resources. However the issue here's that the nvme keep-alive thread running hw/hctx queue dispatch operation hasn't yet finished its work and so it could still potentially access the admin queue resource while the admin queue had been already deleted and that causes the above crash. This fix helps avoid the observed crash by implementing keep-alive as a synchronous operation so that we decrement admin->q_usage_counter only after keep-alive command finished its execution and returns the command status back up to its caller (blk_execute_rq()). This would ensure that fabric shutdown code path doesn't destroy the fabric admin queue until keep-alive request finished execution and also keep-alive thread is not running hw/hctx queue dispatch operation. Reviewed-by: Christoph Hellwig Signed-off-by: Nilay Shroff Signed-off-by: Keith Busch