linux/drivers/of/Makefile, branch master

of: Add a KUnit test for overlays and test managed APIs

2024-07-29T22:33:12Z

Test the KUnit test managed overlay APIs. Confirm that platform devices are created and destroyed properly. This provides us confidence that the test managed APIs work correctly and can be relied upon to provide tests with fake platform devices and device nodes via overlays compiled into the kernel image. Cc: Rob Herring Cc: Saravana Kannan Cc: Daniel Latypov Cc: Brendan Higgins Reviewed-by: David Gow Cc: Rae Moar Reviewed-by: Rob Herring (Arm) Signed-off-by: Stephen Boyd Link: https://lore.kernel.org/r/20240718210513.3801024-5-sboyd@kernel.org

of: Add test managed wrappers for of_overlay_apply()/of_node_put()

2024-07-29T22:33:12Z

Add test managed wrappers for of_overlay_apply() that automatically removes the overlay when the test is finished. This API is intended for use by KUnit tests that test code which relies on 'struct device_node's and of_*() APIs. KUnit tests will call of_overlay_apply_kunit() to load an overlay that's been built into the kernel image. When the test is complete, the overlay will be removed. This has a few benefits: 1) It keeps the tests hermetic because the overlay is removed when the test is complete. Tests won't even be aware that an overlay was loaded in another test. 2) The overlay code can live right next to the unit test that loads it. The overlay and the unit test can be compiled into one kernel module if desired. 3) We can test different device tree configurations by loading different overlays. The overlays can be written for a specific test, and there can be many of them loaded per-test without needing to jam all possible combinations into one DTB. 4) It also allows KUnit to test device tree dependent code on any architecture, not just UML. This allows KUnit tests to test architecture specific device tree code. There are some potential pitfalls though. Test authors need to be careful to not overwrite properties in the live tree. The easiest way to do this is to add and remove nodes with a 'kunit-' prefix, almost guaranteeing that the same node won't be present in the tree loaded at boot. Suggested-by: Rob Herring Cc: Rob Herring Cc: Saravana Kannan Reviewed-by: Rob Herring (Arm) Reviewed-by: David Gow Signed-off-by: Stephen Boyd Link: https://lore.kernel.org/r/20240718210513.3801024-3-sboyd@kernel.org

of: Add KUnit test to confirm DTB is loaded

2024-03-08T18:50:39Z

Add a KUnit test that confirms a DTB has been loaded, i.e. there is a root node, and that the of_have_populated_dt() API works properly. We skip the test when CONFIG_OF_EARLY_FLATREE=n because in that case we know architecture code hasn't called unflatten_(and_copy_)?device_tree() which would populate some sort of root node. Cc: Rob Herring Cc: Frank Rowand Reviewed-by: David Gow Cc: Brendan Higgins Signed-off-by: Stephen Boyd Link: https://lore.kernel.org/r/20240217010557.2381548-8-sboyd@kernel.org Signed-off-by: Rob Herring

of: Create of_root if no dtb provided by firmware

2024-03-08T18:50:39Z

When enabling CONFIG_OF on a platform where 'of_root' is not populated by firmware, we end up without a root node. In order to apply overlays and create subnodes of the root node, we need one. Create this root node by unflattening an empty builtin dtb. If firmware provides a flattened device tree (FDT) then the FDT is unflattened via setup_arch(). Otherwise, the call to unflatten(_and_copy)?_device_tree() will create an empty root node. We make of_have_populated_dt() return true only if the DTB was loaded by firmware so that existing callers don't change behavior after this patch. The call in the of platform code is removed because it prevents overlays from creating platform devices when the empty root node is used. [sboyd@kernel.org: Update of_have_populated_dt() to treat this empty dtb as not populated. Drop setup_of() initcall] Signed-off-by: Frank Rowand Link: https://lore.kernel.org/r/20230317053415.2254616-2-frowand.list@gmail.com Cc: Rob Herring Signed-off-by: Stephen Boyd Link: https://lore.kernel.org/r/20240217010557.2381548-3-sboyd@kernel.org Signed-off-by: Rob Herring

Merge tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2023-04-27T19:07:50Z

Pull char/misc drivers updates from Greg KH: "Here is the "big" set of char/misc and other driver subsystems for 6.4-rc1. It's pretty big, but due to the removal of pcmcia drivers, almost breaks even for number of lines added vs. removed, a nice change. Included in here are: - removal of unused PCMCIA drivers (finally!) - Interconnect driver updates and additions - Lots of IIO driver updates and additions - MHI driver updates - Coresight driver updates - NVMEM driver updates, which required some OF updates - W1 driver updates and a new maintainer to manage the subsystem - FPGA driver updates - New driver subsystem, CDX, for AMD systems - lots of other small driver updates and additions All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (196 commits) mcb-lpc: Reallocate memory region to avoid memory overlapping mcb-pci: Reallocate memory region to avoid memory overlapping mcb: Return actual parsed size when reading chameleon table kernel/configs: Drop Android config fragments virt: acrn: Replace obsolete memalign() with posix_memalign() spmi: Add a check for remove callback when removing a SPMI driver spmi: fix W=1 kernel-doc warnings spmi: mtk-pmif: Drop of_match_ptr for ID table spmi: pmic-arb: Convert to platform remove callback returning void spmi: mtk-pmif: Convert to platform remove callback returning void spmi: hisi-spmi-controller: Convert to platform remove callback returning void w1: gpio: remove unnecessary ENOMEM messages w1: omap-hdq: remove unnecessary ENOMEM messages w1: omap-hdq: add SPDX tag w1: omap-hdq: allow compile testing w1: matrox: remove unnecessary ENOMEM messages w1: matrox: use inline over __inline__ w1: matrox: switch from asm to linux header w1: ds2482: do not use assignment in if condition w1: ds2482: drop unnecessary header ...

of: Move CPU node related functions to their own file

2023-04-13T22:46:34Z

drivers/of/base.c is quite long and we've accumulated a number of CPU node functions. Let's move them to a new file, cpu.c, along with the lone of_cpu_device_node_get() in of_device.h. Moving the declaration has no effect yet as of.h is included by of_device.h. This serves as preparation to disentangle the includes in of_device.h and of_platform.h. Reviewed-by: Sudeep Holla Link: https://lore.kernel.org/r/20230329-dt-cpu-header-cleanups-v1-4-581e2605fe47@kernel.org Signed-off-by: Rob Herring

of: Move of_modalias() to module.c

2023-04-05T17:41:10Z

Create a specific .c file for OF related module handling. Move of_modalias() inside as a first step. The helper is exposed through of.h even though it is only used by core files because the users from device.c will soon be split into an OF-only helper in module.c as well as a device-oriented inline helper in of_device.h. Putting this helper in of_private.h would require to include of_private.h from of_device.h, which is not acceptable. Suggested-by: Rob Herring Signed-off-by: Miquel Raynal Reviewed-by: Rob Herring Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20230404172148.82422-10-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman

of: net: move of_net under net/

2021-10-07T12:39:51Z

Rob suggests to move of_net.c from under drivers/of/ somewhere to the networking code. Suggested-by: Rob Herring Signed-off-by: Jakub Kicinski Reviewed-by: Rob Herring Signed-off-by: David S. Miller

of: Add a common kexec FDT setup function

2021-03-08T19:06:29Z

Both arm64 and powerpc do essentially the same FDT /chosen setup for kexec. The differences are either omissions that arm64 should have or additional properties that will be ignored. The setup code can be combined and shared by both powerpc and arm64. The differences relative to the arm64 version: - If /chosen doesn't exist, it will be created (should never happen). - Any old dtb and initrd reserved memory will be released. - The new initrd and elfcorehdr are marked reserved. - "linux,booted-from-kexec" is set. The differences relative to the powerpc version: - "kaslr-seed" and "rng-seed" may be set. - "linux,elfcorehdr" is set. - Any existing "linux,usable-memory-range" is removed. Combine the code for setting up the /chosen node in the FDT and updating the memory reservation for kexec, for powerpc and arm64, in of_kexec_alloc_and_setup_fdt() and move it to "drivers/of/kexec.c". Signed-off-by: Rob Herring Signed-off-by: Lakshmi Ramasubramanian Reviewed-by: Thiago Jung Bauermann Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/20210221174930.27324-6-nramas@linux.microsoft.com

net: phy: Move of_mdio from drivers/of to drivers/net/mdio

2020-10-10T17:55:05Z

Better place for of_mdio.c is drivers/net/mdio. Move of_mdio.c from drivers/of to drivers/net/mdio Signed-off-by: Calvin Johnson Acked-by: Rob Herring Signed-off-by: Jakub Kicinski