linux/drivers/of/base.c, branch v3.10

of: Fix locking vs. interrupts

2013-06-13T21:12:14Z

The OF code uses irqsafe locks everywhere except in a handful of functions for no obvious reasons. Since the conversion from the old rwlocks, this now triggers lockdep warnings when used at interrupt time. At least one driver (ibmvscsi) seems to be doing that from softirq context. This converts the few non-irqsafe locks into irqsafe ones, making them consistent with the rest of the code. Signed-off-by: Benjamin Herrenschmidt Acked-by: Thomas Gleixner Acked-by: David S. Miller Signed-off-by: Grant Likely

Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux

2013-05-18T17:46:50Z

Pull device tree fixes from Grant Likely: "Device tree bug fixes and documentation updates for v3.10 Nothing earth shattering here. A build failure fix, and fix for releasing nodes and some documenation updates." * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux: Documentation/devicetree: make semantic of initrd-end more explicit of/base: release the node correctly in of_parse_phandle_with_args() of/documentation: move video device bindings to a common place : fix compilation warnings with DT disabled

Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2013-05-04T19:31:18Z

Pull ARM SoC driver changes from Olof Johansson: "This is a rather large set of patches for device drivers that for one reason or another the subsystem maintainer preferred to get merged through the arm-soc tree. There are both new drivers as well as existing drivers that are getting converted from platform-specific code into standalone drivers using the appropriate subsystem specific interfaces. In particular, we can now have pinctrl, clk, clksource and irqchip drivers in one file per driver, without the need to call into platform specific interface, or to get called from platform specific code, as long as all information about the hardware is provided through a device tree. Most of the drivers we touch this time are for clocksource. Since now most of them are part of drivers/clocksource, I expect that we won't have to touch these again from arm-soc and can let the clocksource maintainers take care of these in the future. Another larger part of this series is specific to the exynos platform, which is seeing some significant effort in upstreaming and modernization of its device drivers this time around, which unfortunately is also the cause for the churn and a lot of the merge conflicts. There is one new subsystem that gets merged as part of this series: the reset controller interface, which is a very simple interface for taking devices on the SoC out of reset or back into reset. Patches to use this interface on i.MX follow later in this merge window, and we are going to have other platforms (at least tegra and sirf) get converted in 3.11. This will let us get rid of platform specific callbacks in a number of platform independent device drivers." * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits) irqchip: s3c24xx: add missing __init annotations ARM: dts: Disable the RTC by default on exynos5 clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3} ARM: exynos: restore mach/regs-clock.h for exynos5 clocksource: exynos_mct: fix build error on non-DT pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register() irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure reset: NULL deref on allocation failure reset: Add reset controller API dt: describe base reset signal binding ARM: EXYNOS: Add arm-pmu DT binding for exynos421x ARM: EXYNOS: Add arm-pmu DT binding for exynos5250 ARM: EXYNOS: Enable PMUs for exynos4 irqchip: exynos-combiner: Correct combined IRQs for exynos4 irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq ARM: EXYNOS: fix compilation error introduced due to common clock migration clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3} clk: exynos4: export clocks required for fimc-is clk: samsung: Fix compilation error clk: tegra: fix enum tegra114_clk to match binding ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2013-05-02T00:51:54Z

Pull VFS updates from Al Viro, Misc cleanups all over the place, mainly wrt /proc interfaces (switch create_proc_entry to proc_create(), get rid of the deprecated create_proc_read_entry() in favor of using proc_create_data() and seq_file etc). 7kloc removed. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits) don't bother with deferred freeing of fdtables proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h proc: Make the PROC_I() and PDE() macros internal to procfs proc: Supply a function to remove a proc entry by PDE take cgroup_open() and cpuset_open() to fs/proc/base.c ppc: Clean up scanlog ppc: Clean up rtas_flash driver somewhat hostap: proc: Use remove_proc_subtree() drm: proc: Use remove_proc_subtree() drm: proc: Use minor->index to label things, not PDE->name drm: Constify drm_proc_list[] zoran: Don't print proc_dir_entry data in debug reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show() proc: Supply an accessor for getting the data from a PDE's parent airo: Use remove_proc_subtree() rtl8192u: Don't need to save device proc dir PDE rtl8187se: Use a dir under /proc/net/r8180/ proc: Add proc_mkdir_data() proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h} proc: Move PDE_NET() to fs/proc/proc_net.c ...

proc: Supply a function to remove a proc entry by PDE

2013-05-01T21:29:46Z

Supply a function (proc_remove()) to remove a proc entry (and any subtree rooted there) by proc_dir_entry pointer rather than by name and (optionally) root dir entry pointer. This allows us to eliminate all remaining pde->name accesses outside of procfs. Signed-off-by: David Howells Acked-by: Grant Likely cc: linux-acpi@vger.kernel.org cc: openipmi-developer@lists.sourceforge.net cc: devicetree-discuss@lists.ozlabs.org cc: linux-pci@vger.kernel.org cc: netdev@vger.kernel.org cc: netfilter-devel@vger.kernel.org cc: alsa-devel@alsa-project.org Signed-off-by: Al Viro

[media] DT: export of_get_next_parent() for use by modules: fix modular V4L2

2013-04-17T15:28:57Z

Currently modular V4L2 build with enabled OF is broken dur to the of_get_next_parent() function being unavailable to modules. Export it to fix the build. Signed-off-by: Guennadi Liakhovetski Acked-by: Grant Likely Signed-off-by: Mauro Carvalho Chehab

of/base: release the node correctly in of_parse_phandle_with_args()

2013-04-17T14:53:12Z

Call of_node_put() only when the out_args is NULL on success, or the node's reference count will not be correct because the caller will call of_node_put() again. Signed-off-by: Tang Yuantian [grant.likely: tightened up the patch] Signed-off-by: Grant Likely

of: Remove duplicated code for validating property and value

2013-04-04T04:59:18Z

Several functions in of/base.c have the same code duplicated for finding and validating a property and value. struct property *prop = of_find_property(np, propname, NULL); if (!prop) return -EINVAL; if (!prop->value) return -ENODATA; if ( > prop->length) return -EOVERFLOW; This patch adds of_find_property_value_of_size() which performs the equivalent of the above code and removes the instances where it was duplicated in several functions. Reported-by: Rob Herring Signed-off-by: Tony Prisk Acked-by: Linus Walleij Acked-by: Rob Herring

of: Add support for reading a u32 from a multi-value property.

2013-04-04T04:58:59Z

This patch adds an of_property_read_u32_index() function to allow reading a single indexed u32 value from a property containing multiple u32 values. Signed-off-by: Tony Prisk Reviewed-by: Stephen Warren Acked-by: Linus Walleij Acked-by: Rob Herring

of: Create function for counting number of phandles in a property

2013-02-13T10:09:31Z

This patch creates of_count_phandle_with_args(), a new function for counting the number of phandle+argument tuples in a given property. This is better than the existing method of parsing each phandle individually until parsing fails which is a horribly slow way to do the count. Tested on ARM using the selftest code. v3: - Rebased on top of selftest code cleanup patch v2: - fix bug where of_parse_phandle_with_args() could behave like _count_. - made of_gpio_named_count() into a static inline regardless of CONFIG_OF_GPIO Tested-by: Andreas Larsson Signed-off-by: Grant Likely Cc: Linus Walleij Cc: Rob Herring