linux/drivers/of/base.c, branch v4.1

drivers: of/base: move of_init to driver_init

2015-05-27T02:55:56Z

Commit 5590f3196b29 ("drivers/core/of: Add symlink to device-tree from devices with an OF node") adds the symlink `of_node` for each device pointing to it's device tree node while creating/initialising it. However the devicetree sysfs is created and setup in of_init which is executed at core_initcall level. For all the devices created before of_init, the following error is thrown: "Error -2(-ENOENT) creating of_node link" Like many other components in driver model, initialize the sysfs support for OF/devicetree from driver_init so that it's ready before any devices are created. Fixes: 5590f3196b29 ("drivers/core/of: Add symlink to device-tree from devices with an OF node") Suggested-by: Rob Herring Cc: Grant Likely Cc: Pawel Moll Cc: Benjamin Herrenschmidt Signed-off-by: Sudeep Holla Tested-by: Robert Schwebel Acked-by: Rob Herring Signed-off-by: Greg Kroah-Hartman

Merge tag 'devicetree-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2015-04-24T15:46:18Z

Pull second batch of devicetree updates from Rob Herring: "As Grant mentioned in the first devicetree pull request, here is the 2nd batch of DT changes for 4.1. The main remaining item here is the endianness bindings and related 8250 driver support. - DT endianness specification bindings - big-endian 8250 serial support - DT overlay unittest updates - various DT doc updates - compile fixes for OF_IRQ=n" * tag 'devicetree-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: frv: add io{read,write}{16,32}be functions mn10300: add io{read,write}{16,32}be functions Documentation: DT bindings: add doc for Altera's SoCFPGA platform of: base: improve of_get_next_child() kernel-doc Doc: dt: arch_timer: discourage clock-frequency use of: unittest: overlay: Keep track of created overlays of/fdt: fix allocation size for device node path serial: of_serial: Support big-endian register accesses serial: 8250: Add support for big-endian MMIO accesses of: Document {little,big,native}-endian bindings of/fdt: Add endianness helper function for early init code of: Add helper function to check MMIO register endianness of/fdt: Remove "reg" data prints from early_init_dt_scan_memory of: add vendor prefix for Artesyn of: Add dummy of_irq_to_resource_table() for IRQ_OF=n of: OF_IRQ should depend on IRQ_DOMAIN

Merge tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux

2015-04-18T12:30:10Z

Pull devicetree changes from Grant Likely: "Here are the devicetree changes queued up for v4.1. Nothing really exciting here. Rob has another few commits for big-endian attached UARTs, but those will be sent in a separate merge request since they haven't been as thoroughly tested as this batch. Here are the highlights: - lots of unittest cleanup from Frank Rowand - bugfixes and updates to the of_graph code - tighten up of_get_mac_address() code - documentation updates" * tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux: of/unittest: Fix of_platform_depopulate test case of/unittest: early return from test skips tests of/unittest: breadcrumbs to reduce pain of future maintainers of/unittest: reduce checkpatch noise - line after declarations of/unittest: typo in error string of/unittest: add const where needed of_net: factor out repetitive code from of_get_mac_address() drivers/of: Add empty ranges quirk for PA-Semi of: Allow selection of OF_DYNAMIC and OF_OVERLAY if OF_UNITTEST of: Empty node & property flag accessors when !OF of: Explicitly include linux/types.h in of_graph.h dt-bindings: brcm: rationalize Broadcom documentation naming of/unittest: replace 'selftest' with 'unittest' Documentation: rename of_selftest.txt to of_unittest.txt Documentation: update the of_selftest.txt dt: OF_UNITTEST make dependency broken MAINTAINERS: Pantelis Antoniou device tree overlay maintainer of: Add of_graph_get_port_by_id function of: Add for_each_endpoint_of_node helper macro of: Decrement refcount of previous endpoint in of_graph_get_next_endpoint

of: base: improve of_get_next_child() kernel-doc

2015-04-17T12:49:28Z

Add two new facts to of_get_next_child() documentation: * of_get_next_child() returns NULL when there is not next child * of_get_next_child() decrements the refcount of prev Signed-off-by: Baruch Siach Signed-off-by: Rob Herring

Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2015-04-15T01:10:45Z

Pull i2c updates from Wolfram Sang: "Most notable: - introducing the i2c_quirk infrastructure. Now, flaws of I2C controllers can be described and the core will check if the flaws collide with the messages to be sent - wait_for_completion return type cleanup series - new drivers for Digicolor, Netlogic XLP, Ingenic JZ4780 - updates to the I2C slave framework which include API changes. Its only user was updated, too. Documentation was finally added - changed dynamic bus numbering for the DT case. This could change bus numbers for users. However, it fixes a collision where dynamic and static busses request the same id. - driver bugfixes, cleanups" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits) i2c: xlp9xx: Driver for Netlogic XLP9XX/5XX I2C controller of: Add vendor prefix 'netlogic' i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery i2c: davinci: use bus recovery infrastructure i2c: change input parameter to i2c_adapter for prepare/unprepare_recovery i2c: i2c-mux-gpio: remove error messages for probe deferrals i2c: jz4780: Add i2c bus controller driver for Ingenic JZ4780 i2c: dln2: set the device tree node of the adapter i2c: davinci: fixup wait_for_completion_timeout handling i2c: mpc: Fix ISR return value i2c: slave-eeprom: add more info when to increase the pointer i2c: slave: add documentation for i2c-slave-eeprom Documentation: i2c: describe the new slave mode i2c: slave: rework the slave API i2c: add support for the Digicolor I2C controller i2c: busses with dynamic ids should start after fixed ids for DT of: base: add function to get highest id of an alias stem i2c: designware: Suppress error message if platform_get_irq() < 0 i2c: mpc: assign the correct prescaler from SVR i2c: img-scb: fixup of wait_for_completion_timeout return handling ...

of: Add helper function to check MMIO register endianness

2015-04-15T00:35:44Z

SoC peripherals can come in several different flavors: - little-endian: registers always need to be accessed in LE mode (so the kernel should perform a swap if the CPU is running BE) - big-endian: registers always need to be accessed in BE mode (so the kernel should perform a swap if the CPU is running LE) - native-endian: the bus will automatically swap accesses, so the kernel should never swap Introduce a function that checks an OF device node to see whether it contains a "big-endian" or "native-endian" property. For the former case, always return true. For the latter case, return true iff the kernel was built for BE (implying that the BE MMIO accessors do not perform a swap). Otherwise return false, assuming LE registers. LE registers are assumed by default because most existing drivers (libahci, serial8250, usb) always use readl/writel in the absence of instructions to the contrary, so that will be our fallback. Signed-off-by: Kevin Cernekee Reviewed-by: Peter Hurley Acked-by: Greg Kroah-Hartman Signed-off-by: Rob Herring

Merge tag 'of-graph-for-4.0' of git://git.pengutronix.de/git/pza/linux into for-next

2015-03-25T05:41:08Z

Pull of-graph helpers from Philipp Zabel: of: Add of-graph helpers to loop over endpoints and find ports by id This series converts of_graph_get_next_endpoint to decrement the refcount of the passed prev parameter. This allows to add a for_each_endpoint_of_node helper macro to loop over all endpoints in a device tree node. The of_graph_get_port_by_id function is added to retrieve a port by its known port id (contained in the reg property) from the device tree.

Revert "of: Fix premature bootconsole disable with 'stdout-path'"

2015-03-19T13:46:54Z

This reverts commit 2fa645cb2703d9b3786d850db815414dfeefa51d. The assumption that at least 1 preferred console will be registered when the stdout-path property is set is invalid, which can result in _no_ consoles. Signed-off-by: Peter Hurley Signed-off-by: Rob Herring

of: handle both '/' and ':' in path strings

2015-03-19T13:42:43Z

Commit 106937e8ccdc ("of: fix handling of '/' in options for of_find_node_by_path()") caused a regression in OF handling of stdout-path. While it fixes some cases which have '/' after the ':', it breaks cases where there is more than one '/' *before* the ':'. For example, it breaks this boot string stdout-path = "/rdb/serial@f040ab00:115200"; So rather than doing sequentialized checks (first for '/', then for ':'; or vice versa), to get the correct behavior we need to check for the first occurrence of either one of them. It so happens that the handy strcspn() helper can do just that. Fixes: 106937e8ccdc ("of: fix handling of '/' in options for of_find_node_by_path()") Signed-off-by: Brian Norris Cc: stable@vger.kernel.org # 3.19 Acked-by: Leif Lindholm Signed-off-by: Rob Herring

of: base: add function to get highest id of an alias stem

2015-03-18T12:36:46Z

I2C supports adding adapters using either a dynamic or fixed id. The latter is provided by aliases in the DT case. To prevent id collisions of those two types, install this function which gives us the highest fixed id, so we can then let the dynamically created ones come after this highest number. Signed-off-by: Wolfram Sang Acked-by: Rob Herring Signed-off-by: Wolfram Sang