linux/drivers/of/platform.c, branch v6.4

Merge tag 'devicetree-fixes-for-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2023-04-13T22:21:56Z

Pull devicetree fixes from Rob Herring: - Fix interaction between fw_devlink and DT overlays causing devices to not be probed - Fix the compatible string for loongson,cpu-interrupt-controller * tag 'devicetree-fixes-for-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: treewide: Fix probing of devices in DT overlays dt-bindings: interrupt-controller: loongarch: Fix mismatched compatible

treewide: Fix probing of devices in DT overlays

2023-04-11T19:39:52Z

When loading a DT overlay that creates a device, the device is not probed, unless the DT overlay is unloaded and reloaded again. After the recent refactoring to improve fw_devlink, it no longer depends on the "compatible" property to identify which device tree nodes will become struct devices. fw_devlink now picks up dangling consumers (consumers pointing to descendent device tree nodes of a device that aren't converted to child devices) when a device is successfully bound to a driver. See __fw_devlink_pickup_dangling_consumers(). However, during DT overlay, a device's device tree node can have sub-nodes added/removed without unbinding/rebinding the driver. This difference in behavior between the normal device instantiation and probing flow vs. the DT overlay flow has a bunch of implications that are pointed out elsewhere[1]. One of them is that the fw_devlink logic to pick up dangling consumers is never exercised. This patch solves the fw_devlink issue by marking all DT nodes added by DT overlays with FWNODE_FLAG_NOT_DEVICE (fwnode that won't become device), and by clearing the flag when a struct device is actually created for the DT node. This way, fw_devlink knows not to have consumers waiting on these newly added DT nodes, and to propagate the dependency to an ancestor DT node that has the corresponding struct device. Based on a patch by Saravana Kannan, which covered only platform and spi devices. [1] https://lore.kernel.org/r/CAGETcx_bkuFaLCiPrAWCPQz+w79ccDp6=9e881qmK=vx3hBMyg@mail.gmail.com Fixes: 4a032827daa89350 ("of: property: Simplify of_link_to_phandle()") Link: https://lore.kernel.org/r/CAGETcx_+rhHvaC_HJXGrr5_WAd2+k5f=rWYnkCZ6z5bGX-wj4w@mail.gmail.com Signed-off-by: Geert Uytterhoeven Acked-by: Mark Brown Acked-by: Wolfram Sang # for I2C Acked-by: Shawn Guo Acked-by: Saravana Kannan Tested-by: Ivan Bornyakov Link: https://lore.kernel.org/r/e1fa546682ea4c8474ff997ab6244c5e11b6f8bc.1680182615.git.geert+renesas@glider.be Signed-off-by: Rob Herring

Merge tag 'devicetree-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2023-02-24T21:31:53Z

Pull devicetree updates from Rob Herring: "DT core: - Add node lifecycle unit tests - Add of_property_present() helper aligned with fwnode API - Print more information on reserved regions on boot - Update dtc to upstream v1.6.1-66-gabbd523bae6e - Use strscpy() to instead of strncpy() in DT core - Add option for schema validation on %.dtb targets Bindings: - Add/fix support for listing multiple patterns in DT_SCHEMA_FILES - Rework external memory controller/bus bindings to properly support controller specific child node properties - Convert loongson,ls1x-intc, fcs,fusb302, sil,sii8620, Rockchip RK3399 PCIe, Synquacer I2C, and Synquacer EXIU bindings to DT schema format - Add RiscV SBI PMU event mapping binding - Add missing contraints on Arm SCMI child node allowed properties - Add a bunch of missing Socionext UniPhier glue block bindings and example fixes - Various fixes for duplicate or conflicting type definitions on DT properties" * tag 'devicetree-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (66 commits) dt-bindings: regulator: Add mps,mpq7932 power-management IC of: dynamic: Fix spelling mistake "kojbect" -> "kobject" dt-bindings: drop Sagar Kadam from SiFive binding maintainership dt-bindings: sram: qcom,imem: document sm8450 dt-bindings: interrupt-controller: convert loongson,ls1x-intc.txt to json-schema dt-bindings: arm: Add Cortex-A715 and X3 of: dynamic: add lifecycle docbook info to node creation functions of: add consistency check to of_node_release() of: do not use "%pOF" printk format on node with refcount of zero of: unittest: add node lifecycle tests of: update kconfig unittest help of: add processing of EXPECT_NOT to of_unittest_expect of: prepare to add processing of EXPECT_NOT to of_unittest_expect of: Use preferred of_property_read_* functions of: Use of_property_present() helper of: Add of_property_present() helper of: reserved_mem: Use proper binary prefix dt-bindings: Fix multi pattern support in DT_SCHEMA_FILES of: reserved-mem: print out reserved-mem details during boot dt-bindings: serial: restrict possible child node names ...

of: Use preferred of_property_read_* functions

2023-02-17T21:46:20Z

Replace instances of of_get_property/of_find_property() with appropriate typed of_property_read_*() functions. Link: https://lore.kernel.org/all/20230215215502.690716-1-robh@kernel.org/ Signed-off-by: Rob Herring

of: Use of_property_present() helper

2023-02-17T21:21:36Z

Use of_property_present() instead of of_get_property/of_find_property() in places where we just need to test presence of a property. Reviewed-by: Frank Rowand Tested-by: Frank Rowand Link: https://lore.kernel.org/all/20230215215547.691573-2-robh@kernel.org/ Signed-off-by: Rob Herring

of: Make OF framebuffer device names unique

2023-02-02T23:10:33Z

Since Linux 5.19 this error is observed: sysfs: cannot create duplicate filename '/devices/platform/of-display' This is because multiple devices with the same name 'of-display' are created on the same bus. Update the code to create numbered device names for the displays. Also, fix a node refcounting issue when exiting the boot display loop. cc: linuxppc-dev@lists.ozlabs.org References: https://bugzilla.kernel.org/show_bug.cgi?id=216095 Fixes: 52b1b46c39ae ("of: Create platform devices for OF framebuffers") Reported-by: Erhard F. Suggested-by: Thomas Zimmermann Signed-off-by: Michal Suchanek Link: https://lore.kernel.org/r/20230201162247.3575506-1-robh@kernel.org [robh: Rework to avoid node refcount leaks] Signed-off-by: Rob Herring

of/platform: use of_address_count() helper

2022-10-16T22:58:54Z

Use of_address_count() to instead of open-coding it. Signed-off-by: Yang Yingliang Link: https://lore.kernel.org/r/20221008115617.3583890-3-yangyingliang@huawei.com Signed-off-by: Rob Herring

Merge tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drm

2022-05-25T23:18:27Z

Pull drm updates from Dave Airlie: "Intel have enabled DG2 on certain SKUs for laptops, AMD has started some new GPU support, msm has user allocated VA controls dma-buf: - add dma_resv_replace_fences - add dma_resv_get_singleton - make dma_excl_fence private core: - EDID parser refactorings - switch drivers to drm_mode_copy/duplicate - DRM managed mutex initialization display-helper: - put HDMI, SCDC, HDCP, DSC and DP into new module gem: - rework fence handling ttm: - rework bulk move handling - add common debugfs for resource managers - convert to kvcalloc format helpers: - support monochrome formats - RGB888, RGB565 to XRGB8888 conversions fbdev: - cfb/sys_imageblit fixes - pagelist corruption fix - create offb platform device - deferred io improvements sysfb: - Kconfig rework - support for VESA mode selection bridge: - conversions to devm_drm_of_get_bridge - conversions to panel_bridge - analogix_dp - autosuspend support - it66121 - audio support - tc358767 - DSI to DPI support - icn6211 - PLL/I2C fixes, DT property - adv7611 - enable DRM_BRIDGE_OP_HPD - anx7625 - fill ELD if no monitor - dw_hdmi - add audio support - lontium LT9211 support, i.MXMP LDB - it6505: Kconfig fix, DPCD set power fix - adv7511 - CEC support for ADV7535 panel: - ltk035c5444t, B133UAN01, NV3052C panel support - DataImage FG040346DSSWBG04 support - st7735r - DT bindings fix - ssd130x - fixes i915: - DG2 laptop PCI-IDs ("motherboard down") - Initial RPL-P PCI IDs - compute engine ABI - DG2 Tile4 support - DG2 CCS clear color compression support - DG2 render/media compression formats support - ATS-M platform info - RPL-S PCI IDs added - Bump ADL-P DMC version to v2.16 - Support static DRRS - Support multiple eDP/LVDS native mode refresh rates - DP HDR support for HSW+ - Lots of display refactoring + fixes - GuC hwconfig support and query - sysfs support for multi-tile - fdinfo per-client gpu utilisation - add geometry subslices query - fix prime mmap with LMEM - fix vm open count and remove vma refcounts - contiguous allocation fixes - steered register write support - small PCI BAR enablement - GuC error capture support - sunset igpu legacy mmap support for newer devices - GuC version 70.1.1 support amdgpu: - Initial SoC21 support - SMU 13.x enablement - SMU 13.0.4 support - ttm_eu cleanups - USB-C, GPUVM updates - TMZ fixes for RV - RAS support for VCN - PM sysfs code cleanup - DC FP rework - extend CG/PG flags to 64-bit - SI dpm lockdep fix - runtime PM fixes amdkfd: - RAS/SVM fixes - TLB flush fixes - CRIU GWS support - ignore bogus MEC signals more efficiently msm: - Fourcc modifier for tiled but not compressed layouts - Support for userspace allocated IOVA (GPU virtual address) - DPU: DSC (Display Stream Compression) support - DP: eDP support - DP: conversion to use drm_bridge and drm_bridge_connector - Merge DPU1 and MDP5 MDSS driver - DPU: writeback support nouveau: - make some structures static - make some variables static - switch to drm_gem_plane_helper_prepare_fb radeon: - misc fixes/cleanups mxsfb: - rework crtc mode setting - LCDIF CRC support etnaviv: - fencing improvements - fix address space collisions - cleanup MMU reference handling gma500: - GEM/GTT improvements - connector handling fixes komeda: - switch to plane reset helper mediatek: - MIPI DSI improvements omapdrm: - GEM improvements qxl: - aarch64 support vc4: - add a CL submission tracepoint - HDMI YUV support - HDMI/clock improvements - drop is_hdmi caching virtio: - remove restriction of non-zero blob types vmwgfx: - support for cursormob and cursorbypass 4 - fence improvements tidss: - reset DISPC on startup solomon: - SPI support - DT improvements sun4i: - allwinner D1 support - drop is_hdmi caching imx: - use swap() instead of open-coding - use devm_platform_ioremap_resource - remove redunant initializations ast: - Displayport support rockchip: - Refactor IOMMU initialisation - make some structures static - replace drm_detect_hdmi_monitor with drm_display_info.is_hdmi - support swapped YUV formats, - clock improvements - rk3568 support - VOP2 support mediatek: - MT8186 support tegra: - debugabillity improvements" * tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drm: (1740 commits) drm/i915/dsi: fix VBT send packet port selection for ICL+ drm/i915/uc: Fix undefined behavior due to shift overflowing the constant drm/i915/reg: fix undefined behavior due to shift overflowing the constant drm/i915/gt: Fix use of static in macro mismatch drm/i915/audio: fix audio code enable/disable pipe logging drm/i915: Fix CFI violation with show_dynamic_id() drm/i915: Fix 'mixing different enum types' warnings in intel_display_power.c drm/i915/gt: Fix build error without CONFIG_PM drm/msm/dpu: handle pm_runtime_get_sync() errors in bind path drm/msm/dpu: add DRM_MODE_ROTATE_180 back to supported rotations drm/msm: don't free the IRQ if it was not requested drm/msm/dpu: limit writeback modes according to max_linewidth drm/amd: Don't reset dGPUs if the system is going to s2idle drm/amdgpu: Unmap legacy queue when MES is enabled drm: msm: fix possible memory leak in mdp5_crtc_cursor_set() drm/msm: Fix fb plane offset calculation drm/msm/a6xx: Fix refcount leak in a6xx_gpu_init drm/msm/dsi: don't powerup at modeset time for parade-ps8640 drm/rockchip: Change register space names in vop2 dt-bindings: display: rockchip: make reg-names mandatory for VOP2 ...

Merge tag 'devicetree-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2022-05-25T21:56:06Z

Pull devicetree updates from Rob Herring: "Bindings: - Convert smsc,lan91c111, qcom,spi-qup, qcom,msm-uartdm, qcom,i2c-qup, qcom,gsbi, i2c-mt65xx, TI wkup_m3_ipc (and new props), qcom,smp2p, TI timer, Mediatek gnss, Mediatek topckgen, Mediatek apmixedsys, Mediatek infracfg, fsl,ls-extirq, fsl,layerscape-dcfg, QCom PMIC SPMI, rda,8810pl-timer, Xilinx zynqmp_ipi, uniphier-pcie, and Ilitek touchscreen controllers - Convert various Arm Ltd peripheral IP bindings to schemas - New bindings for Menlo board CPLD, DH electronics board CPLD, Qualcomm Geni based QUP I2C, Renesas RZ/G2UL OSTM, Broafcom BCM4751 GNSS, MT6360 PMIC, ASIX USB Ethernet controllers, and Microchip/SMSC LAN95xx USB Ethernet controllers - Add vendor prefix for Enclustra - Add various compatible string additions - Various example fixes and cleanups - Remove unused hisilicon,hi6220-reset binding - Treewide fix properties missing type definition - Drop some empty and unreferenced .txt bindings - Documentation improvements for writing schemas DT driver core: - Drop static IRQ resources for DT platform devices as IRQ setup is dynamic and drivers have all been converted to use platform_get_irq() and friends - Rework memory allocations and frees for overlays - Continue overlay notifier callbacks on successful calls and add unittests - Handle 'interrupts-extended' in early DT IRQ setup - Fix of_property_read_string() errors to match documentation - Ignore disabled nodes in FDT API calls" * tag 'devicetree-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (86 commits) of/irq: fix typo in comment dt-bindings: Fix properties without any type Revert "dt-bindings: mailbox: qcom-ipcc: add missing properties into example" dt-bindings: input: touchscreen: ilitek_ts_i2c: Absorb ili2xxx bindings dt-bindings: timer: samsung,exynos4210-mct: define strict clock order dt-bindings: timer: samsung,exynos4210-mct: drop unneeded minItems dt-bindings: timer: cdns,ttc: drop unneeded minItems dt-bindings: mailbox: zynqmp_ipi: convert to yaml dt-bindings: usb: ci-hdrc-usb2: fix node node for ethernet controller dt-bindings: net: add schema for Microchip/SMSC LAN95xx USB Ethernet controllers dt-bindings: net: add schema for ASIX USB Ethernet controllers of/fdt: Ignore disabled memory nodes dt-bindings: arm: fix typos in compatible dt-bindings: mfd: Add bindings child nodes for the Mediatek MT6360 dt-bindings: display: convert Arm Komeda to DT schema dt-bindings: display: convert Arm Mali-DP to DT schema dt-bindings: display: convert Arm HDLCD to DT schema dt-bindings: display: convert PL110/PL111 to DT schema dt-bindings: arm: convert vexpress-config to DT schema dt-bindings: arm: convert vexpress-sysregs to DT schema ...

mtd: phram: Allow probing via reserved-memory

2022-04-25T08:37:49Z

Allow phram to be probed from the devicetree. It expects to be in a reserved-memory node as documented by the bindings. This allows things like partitioning to be specified via the devicetree. Signed-off-by: Vincent Whitchurch Acked-by: Rob Herring Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220412135302.1682890-4-vincent.whitchurch@axis.com