linux/drivers/of, branch v5.10

of/address: Fix of_node memory leak in of_dma_is_coherent

2020-11-11T23:10:16Z

Commit dabf6b36b83a ("of: Add OF_DMA_DEFAULT_COHERENT & select it on powerpc") added a check to of_dma_is_coherent which returns early if OF_DMA_DEFAULT_COHERENT is enabled. This results in the of_node_put() being skipped causing a memory leak. Moved the of_node_get() below this check so we now we only get the node if OF_DMA_DEFAULT_COHERENT is not enabled. Fixes: dabf6b36b83a ("of: Add OF_DMA_DEFAULT_COHERENT & select it on powerpc") Signed-off-by: Evan Nimmo Link: https://lore.kernel.org/r/20201110022825.30895-1-evan.nimmo@alliedtelesis.co.nz Signed-off-by: Rob Herring

of: Drop superfluous ULL suffix for ~0

2020-11-02T17:32:46Z

There is no need to specify a "ULL" suffix for "all bits set": "~0" is sufficient, and works regardless of type. In fact adding the suffix makes the code more fragile. Fixes: 48ab6d5d1f09 ("dma-mapping: fix 32-bit overflow with CONFIG_ARM_LPAE=n") Suggested-by: Linus Torvalds Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds

dma-mapping: fix 32-bit overflow with CONFIG_ARM_LPAE=n

2020-10-29T15:59:34Z

On r8a7791/koelsch and shmobile_defconfig, PCIe probing fails with: rcar-pcie fe000000.pcie: Adjusted size 0x0 invalid rcar-pcie: probe of fe000000.pcie failed with error -22 of_dma_get_range() returns the following map: cpu_start 0x40000000 dma_start 0x40000000 size 0x080000000 offset 0 cpu_start 0x00000000 dma_start 0x00000000 size 0x100000000 offset 0 If CONFIG_ARM_LPAE=n, dma_addr_t is 32-bit. Hence when assigning r->dma_start + r->size to dma_end, this value will be truncated to 32-bit, yielding zero when processing the second table entry. Consequently, both dma_start and dma_end will be zero, leading to a zero size. Fix this by changing the dma_start and dma_end variables from dma_addr_t to u64. Fixes: e0d072782c734d27 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset") Signed-off-by: Geert Uytterhoeven Signed-off-by: Christoph Hellwig

of: Fix reserved-memory overlap detection

2020-10-26T01:37:55Z

The reserved-memory overlap detection code fails to detect overlaps if either of the regions starts at address 0x0. The code explicitly checks for and ignores such regions, apparently in order to ignore dynamically allocated regions which have an address of 0x0 at this point. These dynamically allocated regions also have a size of 0x0 at this point, so fix this by removing the check and sorting the dynamically allocated regions ahead of any static regions at address 0x0. For example, there are two overlaps in this case but they are not currently reported: foo@0 { reg = <0x0 0x2000>; }; bar@0 { reg = <0x0 0x1000>; }; baz@1000 { reg = <0x1000 0x1000>; }; quux { size = <0x1000>; }; but they are after this patch: OF: reserved mem: OVERLAP DETECTED! bar@0 (0x00000000--0x00001000) overlaps with foo@0 (0x00000000--0x00002000) OF: reserved mem: OVERLAP DETECTED! foo@0 (0x00000000--0x00002000) overlaps with baz@1000 (0x00001000--0x00002000) Signed-off-by: Vincent Whitchurch Link: https://lore.kernel.org/r/ded6fd6b47b58741aabdcc6967f73eca6a3f311e.1603273666.git-series.vincent.whitchurch@axis.com Signed-off-by: Rob Herring

treewide: Convert macro and uses of section(foo) to section("foo")

2020-10-25T21:51:49Z

Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl Signed-off-by: Joe Perches Reviewed-by: Nick Desaulniers Reviewed-by: Miguel Ojeda Signed-off-by: Linus Torvalds

Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2020-10-16T01:42:13Z

Pull networking updates from Jakub Kicinski: - Add redirect_neigh() BPF packet redirect helper, allowing to limit stack traversal in common container configs and improving TCP back-pressure. Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain. - Expand netlink policy support and improve policy export to user space. (Ge)netlink core performs request validation according to declared policies. Expand the expressiveness of those policies (min/max length and bitmasks). Allow dumping policies for particular commands. This is used for feature discovery by user space (instead of kernel version parsing or trial and error). - Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge. - Allow more than 255 IPv4 multicast interfaces. - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK packets of TCPv6. - In Multi-patch TCP (MPTCP) support concurrent transmission of data on multiple subflows in a load balancing scenario. Enhance advertising addresses via the RM_ADDR/ADD_ADDR options. - Support SMC-Dv2 version of SMC, which enables multi-subnet deployments. - Allow more calls to same peer in RxRPC. - Support two new Controller Area Network (CAN) protocols - CAN-FD and ISO 15765-2:2016. - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit kernel problem. - Add TC actions for implementing MPLS L2 VPNs. - Improve nexthop code - e.g. handle various corner cases when nexthop objects are removed from groups better, skip unnecessary notifications and make it easier to offload nexthops into HW by converting to a blocking notifier. - Support adding and consuming TCP header options by BPF programs, opening the doors for easy experimental and deployment-specific TCP option use. - Reorganize TCP congestion control (CC) initialization to simplify life of TCP CC implemented in BPF. - Add support for shipping BPF programs with the kernel and loading them early on boot via the User Mode Driver mechanism, hence reusing all the user space infra we have. - Support sleepable BPF programs, initially targeting LSM and tracing. - Add bpf_d_path() helper for returning full path for given 'struct path'. - Make bpf_tail_call compatible with bpf-to-bpf calls. - Allow BPF programs to call map_update_elem on sockmaps. - Add BPF Type Format (BTF) support for type and enum discovery, as well as support for using BTF within the kernel itself (current use is for pretty printing structures). - Support listing and getting information about bpf_links via the bpf syscall. - Enhance kernel interfaces around NIC firmware update. Allow specifying overwrite mask to control if settings etc. are reset during update; report expected max time operation may take to users; support firmware activation without machine reboot incl. limits of how much impact reset may have (e.g. dropping link or not). - Extend ethtool configuration interface to report IEEE-standard counters, to limit the need for per-vendor logic in user space. - Adopt or extend devlink use for debug, monitoring, fw update in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx, dpaa2-eth). - In mlxsw expose critical and emergency SFP module temperature alarms. Refactor port buffer handling to make the defaults more suitable and support setting these values explicitly via the DCBNL interface. - Add XDP support for Intel's igb driver. - Support offloading TC flower classification and filtering rules to mscc_ocelot switches. - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as fixed interval period pulse generator and one-step timestamping in dpaa-eth. - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3) offload. - Add Lynx PHY/PCS MDIO module, and convert various drivers which have this HW to use it. Convert mvpp2 to split PCS. - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as 7-port Mediatek MT7531 IP. - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver, and wcn3680 support in wcn36xx. - Improve performance for packets which don't require much offloads on recent Mellanox NICs by 20% by making multiple packets share a descriptor entry. - Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto subtree to drivers/net. Move MDIO drivers out of the phy directory. - Clean up a lot of W=1 warnings, reportedly the actively developed subsections of networking drivers should now build W=1 warning free. - Make sure drivers don't use in_interrupt() to dynamically adapt their code. Convert tasklets to use new tasklet_setup API (sadly this conversion is not yet complete). * tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits) Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH" net, sockmap: Don't call bpf_prog_put() on NULL pointer bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo bpf, sockmap: Add locking annotations to iterator netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements net: fix pos incrementment in ipv6_route_seq_next net/smc: fix invalid return code in smcd_new_buf_create() net/smc: fix valid DMBE buffer sizes net/smc: fix use-after-free of delayed events bpfilter: Fix build error with CONFIG_BPFILTER_UMH cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info bpf: Fix register equivalence tracking. rxrpc: Fix loss of final ack on shutdown rxrpc: Fix bundle counting for exclusive connections netfilter: restore NF_INET_NUMHOOKS ibmveth: Identify ingress large send packets. ibmveth: Switch order of ibmveth_helper calls. cxgb4: handle 4-tuple PEDIT to NAT mode translation selftests: Add VRF route leaking tests ...

Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping

2020-10-15T21:43:29Z

Pull dma-mapping updates from Christoph Hellwig: - rework the non-coherent DMA allocator - move private definitions out of - lower CMA_ALIGNMENT (Paul Cercueil) - remove the omap1 dma address translation in favor of the common code - make dma-direct aware of multiple dma offset ranges (Jim Quinlan) - support per-node DMA CMA areas (Barry Song) - increase the default seg boundary limit (Nicolin Chen) - misc fixes (Robin Murphy, Thomas Tai, Xu Wang) - various cleanups * tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits) ARM/ixp4xx: add a missing include of dma-map-ops.h dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling dma-direct: factor out a dma_direct_alloc_from_pool helper dma-direct check for highmem pages in dma_direct_alloc_pages dma-mapping: merge into dma-mapping: move large parts of to kernel/dma dma-mapping: move dma-debug.h to kernel/dma/ dma-mapping: remove dma-mapping: merge into dma-contiguous: remove dma_contiguous_set_default dma-contiguous: remove dev_set_cma_area dma-contiguous: remove dma_declare_contiguous dma-mapping: split cma: decrease CMA_ALIGNMENT lower limit to 2 firewire-ohci: use dma_alloc_pages dma-iommu: implement ->alloc_noncoherent dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods dma-mapping: add a new dma_alloc_pages API dma-mapping: remove dma_cache_sync 53c700: convert to dma_alloc_noncoherent ...

net: phy: Move of_mdio from drivers/of to drivers/net/mdio

2020-10-10T17:55:05Z

Better place for of_mdio.c is drivers/net/mdio. Move of_mdio.c from drivers/of to drivers/net/mdio Signed-off-by: Calvin Johnson Acked-by: Rob Herring Signed-off-by: Jakub Kicinski

Merge branch 'dt/linus' into dt/next

2020-10-06T13:38:32Z

dma-mapping: split

2020-10-06T05:07:03Z

Split out all the bits that are purely for dma_map_ops implementations and related code into a new header so that they don't get pulled into all the drivers. That also means the architecture specific is not pulled in by any more, which leads to a missing includes that were pulled in by the x86 or arm versions in a few not overly portable drivers. Signed-off-by: Christoph Hellwig