linux/drivers/opp, branch v5.4

opp: Reinitialize the list_kref before adding the static OPPs again

2019-10-23T05:28:44Z

The list_kref reaches a count of 0 when all the static OPPs are removed, for example when dev_pm_opp_of_cpumask_remove_table() is called, though the actual OPP table may not get freed as it may still be referenced by other parts of the kernel, like from a call to dev_pm_opp_set_supported_hw(). And if we call dev_pm_opp_of_cpumask_add_table() again at this point, we must reinitialize the list_kref otherwise the kernel will hit a WARN() in kref infrastructure for incrementing a kref with value 0. Fixes: 11e1a1648298 ("opp: Don't decrement uninitialized list_kref") Reported-by: Dmitry Osipenko Tested-by: Dmitry Osipenko Signed-off-by: Viresh Kumar

opp: core: Revert "add regulators enable and disable"

2019-10-21T02:28:12Z

All the drivers, which use the OPP framework control regulators, which are already enabled. Typically those regulators are also system critical, due to providing power to CPU core or system buses. It turned out that there are cases, where calling regulator_enable() on such boot-enabled regulator has side-effects and might change its initial voltage due to performing initial voltage balancing without all restrictions from the consumers. Until this issue becomes finally solved in regulator core, avoid calling regulator_enable()/disable() from the OPP framework. This reverts commit 7f93ff73f7c8c8bfa6be33bcc16470b0b44682aa. Signed-off-by: Marek Szyprowski Reviewed-by: Mark Brown Signed-off-by: Viresh Kumar

opp: of: drop incorrect lockdep_assert_held()

2019-10-10T10:46:13Z

_find_opp_of_np() doesn't traverse the list of OPP tables but instead just the entries within an OPP table and so only requires to lock the OPP table itself. The lockdep_assert_held() was added there by mistake and isn't really required. Fixes: 5d6d106fa455 ("OPP: Populate required opp tables from "required-opps" property") Cc: v5.0+ # v5.0+ Reported-by: Niklas Cassel Signed-off-by: Viresh Kumar

opp: of: Support multiple suspend OPPs defined in DT

2019-07-26T07:55:52Z

With property "opp-supported-hw" introduced, the OPP table in DT could be a large OPP table and ONLY a subset of OPPs are available, based on the version of the hardware running on. That introduces restriction of using "opp-suspend" property to define the suspend OPP, as we are NOT sure if the OPP containing "opp-suspend" property is available for the hardware running on, and the of opp core does NOT allow multiple suspend OPPs defined in DT OPP table. To eliminate this restrition, make of opp core allow multiple suspend OPPs defined in DT, and pick the OPP with highest rate and with "opp-suspend" property present to be suspend OPP, it can speed up the suspend/resume process. Signed-off-by: Anson Huang Signed-off-by: Viresh Kumar

opp: core: add regulators enable and disable

2019-07-26T07:55:52Z

Add enable regulators to dev_pm_opp_set_regulators() and disable regulators to dev_pm_opp_put_regulators(). Even if bootloader leaves regulators enabled, they should be enabled in kernel in order to increase the reference count. Signed-off-by: Kamil Konieczny Signed-off-by: Viresh Kumar

opp: Don't decrement uninitialized list_kref

2019-07-26T07:55:52Z

The list_kref was added for static OPPs and to track their users. The kref is initialized while the static OPPs are added, but removed unconditionally even if the static OPPs were never added. This causes refcount mismatch warnings currently. Fix that by always initializing the kref when the OPP table is first initialized. The refcount is later incremented only for the second user onwards. Fixes: d0e8ae6c26da ("OPP: Create separate kref for static OPPs list") Reported-by: Rajendra Nayak Signed-off-by: Viresh Kumar

opp: Add dev_pm_opp_find_level_exact()

2019-07-26T07:54:59Z

Since the performance states in the OPP table are unique, implement a dev_pm_opp_find_level_exact() in order to be able to fetch a specific OPP. Signed-off-by: Niklas Cassel [ Viresh: Updated commit log ] Signed-off-by: Viresh Kumar

opp: Return genpd virtual devices from dev_pm_opp_attach_genpd()

2019-07-26T07:53:31Z

The cpufreq drivers don't need to do runtime PM operations on the virtual devices returned by dev_pm_domain_attach_by_name() and so the virtual devices weren't shared with the callers of dev_pm_opp_attach_genpd() earlier. But the IO device drivers would want to do that. This patch updates the prototype of dev_pm_opp_attach_genpd() to accept another argument to return the pointer to the array of genpd virtual devices. Reported-by: Rajendra Nayak Tested-by: Rajendra Nayak Signed-off-by: Viresh Kumar

opp: Not all power-domains are scalable

2019-07-26T07:53:31Z

A device may have multiple power-domains and not all of them may be scalable (i.e. support performance states). But dev_pm_opp_attach_genpd() doesn't take that into account currently. Fix that by not verifying the names argument with "power-domain-names" DT property and finding the index into the required-opps array. The names argument will anyway get verified later on when we call dev_pm_domain_attach_by_name(). Fixes: 6319aee10e53 ("opp: Attach genpds to devices from within OPP core") Reported-by: Rajendra Nayak Tested-by: Rajendra Nayak Signed-off-by: Viresh Kumar

Merge tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2019-07-16T03:44:49Z

Pull PCI updates from Bjorn Helgaas: "Enumeration changes: - Evaluate PCI Boot Configuration _DSM to learn if firmware wants us to preserve its resource assignments (Benjamin Herrenschmidt) - Simplify resource distribution (Nicholas Johnson) - Decode 32 GT/s link speed (Gustavo Pimentel) Virtualization: - Fix incorrect caching of VF config space size (Alex Williamson) - Fix VF driver probing sysfs knobs (Alex Williamson) Peer-to-peer DMA: - Fix dma_virt_ops check (Logan Gunthorpe) Altera host bridge driver: - Allow building as module (Ley Foon Tan) Armada 8K host bridge driver: - add PHYs support (Miquel Raynal) DesignWare host bridge driver: - Export APIs to support removable loadable module (Vidya Sagar) - Enable Relaxed Ordering erratum workaround only on Tegra20 & Tegra30 (Vidya Sagar) Hyper-V host bridge driver: - Fix use-after-free in eject (Dexuan Cui) Mobiveil host bridge driver: - Clean up and fix many issues, including non-identify mapped windows, 64-bit windows, multi-MSI, class code, INTx clearing (Hou Zhiqiang) Qualcomm host bridge driver: - Use clk bulk API for 2.4.0 controllers (Bjorn Andersson) - Add QCS404 support (Bjorn Andersson) - Assert PERST for at least 100ms (Niklas Cassel) R-Car host bridge driver: - Add r8a774a1 DT support (Biju Das) Tegra host bridge driver: - Add support for Gen2, opportunistic UpdateFC and ACK (PCIe protocol details) AER, GPIO-based PERST# (Manikanta Maddireddy) - Fix many issues, including power-on failure cases, interrupt masking in suspend, UPHY settings, AFI dynamic clock gating, pending DLL transactions (Manikanta Maddireddy) Xilinx host bridge driver: - Fix NWL Multi-MSI programming (Bharat Kumar Gogada) Endpoint support: - Fix 64bit BAR support (Alan Mikhak) - Fix pcitest build issues (Alan Mikhak, Andy Shevchenko) Bug fixes: - Fix NVIDIA GPU multi-function power dependencies (Abhishek Sahu) - Fix NVIDIA GPU HDA enablement issue (Lukas Wunner) - Ignore lockdep for sysfs "remove" (Marek Vasut) Misc: - Convert docs to reST (Changbin Du, Mauro Carvalho Chehab)" * tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (107 commits) PCI: Enable NVIDIA HDA controllers tools: PCI: Fix installation when `make tools/pci_install` PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB PCI: Fix typos and whitespace errors PCI: mobiveil: Fix INTx interrupt clearing in mobiveil_pcie_isr() PCI: mobiveil: Fix infinite-loop in the INTx handling function PCI: mobiveil: Move PCIe PIO enablement out of inbound window routine PCI: mobiveil: Add upper 32-bit PCI base address setup in inbound window PCI: mobiveil: Add upper 32-bit CPU base address setup in outbound window PCI: mobiveil: Mask out hardcoded bits in inbound/outbound windows setup PCI: mobiveil: Clear the control fields before updating it PCI: mobiveil: Add configured inbound windows counter PCI: mobiveil: Fix the valid check for inbound and outbound windows PCI: mobiveil: Clean-up program_{ib/ob}_windows() PCI: mobiveil: Remove an unnecessary return value check PCI: mobiveil: Fix error return values PCI: mobiveil: Refactor the MEM/IO outbound window initialization PCI: mobiveil: Make some register updates more readable PCI: mobiveil: Reformat the code for readability dt-bindings: PCI: mobiveil: Change gpio_slave and apb_csr to optional ...