linux/drivers/parisc, branch v3.10

parisc: fix serial ports on C8000 workstation

2013-06-18T18:29:07Z

The C8000 workstation (64 bit kernel only) has a somewhat different serial port configuration than other models. Thomas Bogendoerfer sent a patch to fix this in September 2010, which was now minimally modified by me. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Helge Deller

parisc/PCI: lba: fix: convert to pci_create_root_bus() for correct root bus resources (v2)

2013-06-01T12:44:25Z

commit dc7dce280a Author: Bjorn Helgaas Date: Fri Oct 28 16:27:27 2011 -0600 parisc/PCI: lba: convert to pci_create_root_bus() for correct root bus resources Supply root bus resources to pci_create_root_bus() so they're correct immediately. This fixes the problem of "early" and "header" quirks seeing incorrect root bus resources. added tests for elmmio_space.start while it should use elmmio_space.flags. This for example led to incorrect resource assignments and a non-working stifb framebuffer on most parisc machines. LBA 10:1: PCI host bridge to bus 0000:01 pci_bus 0000:01: root bus resource [io 0x12000-0x13fff] (bus address [0x2000-0x3fff]) pci_bus 0000:01: root bus resource [mem 0xfffffffffa000000-0xfffffffffbffffff] (bus address [0xfa000000-0xfbffffff]) pci_bus 0000:01: root bus resource [mem 0xfffffffff4800000-0xfffffffff4ffffff] (bus address [0xf4800000-0xf4ffffff]) pci_bus 0000:01: root bus resource [??? 0x00000001 flags 0x0] Signed-off-by: Helge Deller Acked-by: Bjorn Helgaas

parisc/PCI: Set type for LBA bus_num resource

2013-06-01T12:43:02Z

The non-PAT resource probing code failed to set the type of the LBA bus_num resource (30aa80da43 "parisc/PCI: register busn_res for root buses" did the corresponding thing for the PAT case). This causes incorrect resource assignments and a non-working stifb framebuffer on most parisc machines. Signed-off-by: Bjorn Helgaas Signed-off-by: Helge Deller

parisc/superio: Use module_pci_driver to register driver

2013-05-24T20:35:46Z

Removing some boilerplate by using module_pci_driver instead of calling register and unregister in the otherwise empty init/exit functions. Signed-off-by: Peter Huewe Signed-off-by: Helge Deller

parisc: fix partly 16/64k PAGE_SIZE boot

2013-05-06T21:08:32Z

This patch fixes partly PAGE_SIZEs of 16K or 64K by adjusting the assembler PTE lookup code and the assembler TEMPALIAS code. Furthermore some data alignments for PAGE_SIZE have been limited to 4K (or less) to not waste too much memory with greater page sizes. As a side note, the palo loader can (currently) only handle up to 10 ELF segments which is fixed with tighter aligning as well. My testings indicated that the ldci command in the sba iommu coding needed adjustment by the PAGE_SHIFT value and that the I/O PDIR Page size was only set to 4K for my machine (C3000). All this fixes partly the boot, but there are still quite some caching problems left. Examples are e.g. the symbios logic driver which is failing: sym0: <896> rev 0x7 at pci 0000:00:0f.0 irq 69 sym0: PA-RISC Firmware, ID 7, Fast-40, SE, parity checking CACHE TEST FAILED: DMA error (dstat=0x81).sym0: CACHE INCORRECTLY CONFIGURED. and the tulip network driver which doesn't seem to work correctly either: Sending BOOTP requests .net eth0: Setting full-duplex based on MII#1 link partner capability of 05e1 ..... timed out! Beside those kernel fixes glibc will need fixes too to be able to handle >4K page sizes. Signed-off-by: Helge Deller

procfs: new helper - PDE_DATA(inode)

2013-04-09T18:13:32Z

The only part of proc_dir_entry the code outside of fs/proc really cares about is PDE(inode)->data. Provide a helper for that; static inline for now, eventually will be moved to fs/proc, along with the knowledge of struct proc_dir_entry layout. Signed-off-by: Al Viro

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2013-02-27T04:16:07Z

Pull vfs pile (part one) from Al Viro: "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent locking violations, etc. The most visible changes here are death of FS_REVAL_DOT (replaced with "has ->d_weak_revalidate()") and a new helper getting from struct file to inode. Some bits of preparation to xattr method interface changes. Misc patches by various people sent this cycle *and* ocfs2 fixes from several cycles ago that should've been upstream right then. PS: the next vfs pile will be xattr stuff." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) saner proc_get_inode() calling conventions proc: avoid extra pde_put() in proc_fill_super() fs: change return values from -EACCES to -EPERM fs/exec.c: make bprm_mm_init() static ocfs2/dlm: use GFP_ATOMIC inside a spin_lock ocfs2: fix possible use-after-free with AIO ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero target: writev() on single-element vector is pointless export kernel_write(), convert open-coded instances fs: encode_fh: return FILEID_INVALID if invalid fid_type kill f_vfsmnt vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op nfsd: handle vfs_getattr errors in acl protocol switch vfs_getattr() to struct path default SET_PERSONALITY() in linux/elf.h ceph: prepopulate inodes only when request is aborted d_hash_and_lookup(): export, switch open-coded instances 9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate() 9p: split dropping the acls from v9fs_set_create_acl() ...

new helper: file_inode(file)

2013-02-23T04:31:31Z

Signed-off-by: Al Viro

parisc: led driver requires CONFIG_VM_EVENT_COUNTERS

2013-02-20T21:51:52Z

LED activity is calculated out of the vm event counters wich are delivered through the all_vm_events() function which requires CONFIG_VM_EVENT_COUNTERS. Signed-off-by: Helge Deller

parisc: remove IRQF_DISABLED

2013-02-20T21:50:26Z

People are playing odd games with IRQF_DISABLED, remove it. Its not reliable, since shared interrupt lines could disable it for you, and its possible and allowed for archs to disable IRQs to limit IRQ nesting. Therefore, simply mandate that _ALL_ IRQ handlers are run with IRQs disabled. [ This _should_ not break anything, since we've mandated that IRQ handlers _must_ be able to deal with this for a _long_ time ] IRQ handlers should be fast, no if buts and any other exceptions. We also have plenty instrumentation to find any offending IRQ latency sources. Signed-off-by: Peter Zijlstra Acked-by: Ingo Molnar Signed-off-by: Helge Deller