linux/drivers/pci/controller, branch v6.7

PCI: qcom: Clean up ASPM comment

2023-12-11T18:08:53Z

Break up the newly added ASPM comment so that it fits within the soft 80 character limit and becomes more readable. Link: https://lore.kernel.org/r/20231128081512.19387-5-johan+linaro@kernel.org Signed-off-by: Johan Hovold Signed-off-by: Bjorn Helgaas

PCI: qcom: Fix potential deadlock when enabling ASPM

2023-12-11T18:08:43Z

The qcom_pcie_enable_aspm() helper is called from pci_walk_bus() during host init to enable ASPM. Since pci_walk_bus() already holds a pci_bus_sem read lock, use pci_enable_link_state_locked() to enable link states in order to avoid a potential deadlock (e.g. in case someone takes a write lock before reacquiring the read lock). This issue was reported by lockdep: ============================================ WARNING: possible recursive locking detected 6.7.0-rc1 #4 Not tainted -------------------------------------------- kworker/u16:6/147 is trying to acquire lock: ffffbf3ff9d2cfa0 (pci_bus_sem){++++}-{3:3}, at: pci_enable_link_state+0x74/0x1e8 but task is already holding lock: ffffbf3ff9d2cfa0 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(pci_bus_sem); lock(pci_bus_sem); *** DEADLOCK *** Fixes: 9f4f3dfad8cf ("PCI: qcom: Enable ASPM for platforms supporting 1.9.0 ops") Link: https://lore.kernel.org/r/20231128081512.19387-4-johan+linaro@kernel.org Signed-off-by: Johan Hovold [bhelgaas: add "potential" in subject since the deadlock has only been reported by lockdep, include helper name in commit log] Signed-off-by: Bjorn Helgaas Reviewed-by: Manivannan Sadhasivam

PCI: vmd: Fix potential deadlock when enabling ASPM

2023-12-11T18:07:59Z

The vmd_pm_enable_quirk() helper is called from pci_walk_bus() during probe to enable ASPM for controllers with VMD_FEAT_BIOS_PM_QUIRK set. Since pci_walk_bus() already holds a pci_bus_sem read lock, use pci_enable_link_state_locked() to enable link states in order to avoid a potential deadlock (e.g. in case someone takes a write lock before reacquiring the read lock). Fixes: f492edb40b54 ("PCI: vmd: Add quirk to configure PCIe ASPM and LTR") Link: https://lore.kernel.org/r/20231128081512.19387-3-johan+linaro@kernel.org Signed-off-by: Johan Hovold [bhelgaas: add "potential" in subject since the deadlock has only been reported by lockdep, include helper name in commit log] Signed-off-by: Bjorn Helgaas Reviewed-by: Manivannan Sadhasivam Cc: # 6.3 Cc: Michael Bottini Cc: David E. Box

PCI: loongson: Limit MRRS to 256

2023-12-08T16:48:37Z

This is a partial revert of 8b3517f88ff2 ("PCI: loongson: Prevent LS7A MRRS increases") for MIPS-based Loongson. Some MIPS Loongson systems don't support arbitrary Max_Read_Request_Size (MRRS) settings. 8b3517f88ff2 ("PCI: loongson: Prevent LS7A MRRS increases") worked around that by (1) assuming that firmware configured MRRS to the maximum supported value and (2) preventing the PCI core from increasing MRRS. Unfortunately, some firmware doesn't set that maximum MRRS correctly, which results in devices not being initialized correctly. One symptom, from the Debian report below, is this: ata4.00: exception Emask 0x0 SAct 0x20000000 SErr 0x0 action 0x6 frozen ata4.00: failed command: WRITE FPDMA QUEUED ata4.00: cmd 61/20:e8:00:f0:e1/00:00:00:00:00/40 tag 29 ncq dma 16384 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link Limit MRRS to 256 because MIPS Loongson with higher MRRS support is considered rare. This must be done at device enablement stage because the MRRS setting may get lost if PCI_COMMAND_MASTER on the parent bridge is cleared, and we are only sure parent bridge is enabled at this point. Fixes: 8b3517f88ff2 ("PCI: loongson: Prevent LS7A MRRS increases") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217680 Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1035587 Link: https://lore.kernel.org/r/20231201115028.84351-1-jiaxun.yang@flygoat.com Signed-off-by: Jiaxun Yang Signed-off-by: Bjorn Helgaas Acked-by: Huacai Chen Cc: stable@vger.kernel.org

Merge tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2023-11-03T00:05:18Z

Pull pci updates from Bjorn Helgaas: "Enumeration: - Use acpi_evaluate_dsm_typed() instead of open-coding _DSM evaluation to learn device characteristics (Andy Shevchenko) - Tidy multi-function header checks using new PCI_HEADER_TYPE_MASK definition (Ilpo Järvinen) - Simplify config access error checking in various drivers (Ilpo Järvinen) - Use pcie_capability_clear_word() (not pcie_capability_clear_and_set_word()) when only clearing (Ilpo Järvinen) - Add pci_get_base_class() to simplify finding devices using base class only (ignoring subclass and programming interface) (Sui Jingfeng) - Add pci_is_vga(), which includes ancient PCI_CLASS_NOT_DEFINED_VGA devices from before the Class Code was added to PCI (Sui Jingfeng) - Use pci_is_vga() for vgaarb, sysfs "boot_vga", virtio, qxl to include ancient VGA devices (Sui Jingfeng) Resource management: - Make pci_assign_unassigned_resources() non-init because sparc uses it after init (Randy Dunlap) Driver binding: - Retain .remove() and .probe() callbacks (previously __init) because sysfs may cause them to be called later (Uwe Kleine-König) - Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device, so it can be claimed by dwc3 instead (Vicki Pfau) PCI device hotplug: - Add Ampere Altra Attention Indicator extension driver for acpiphp (D Scott Phillips) Power management: - Quirk VideoPropulsion Torrent QN16e with longer delay after reset (Lukas Wunner) - Prevent users from overriding drivers that say we shouldn't use D3cold (Lukas Wunner) - Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4 because wakeup interrupts from those states don't work if amd-pmc has put the platform in a hardware sleep state (Mario Limonciello) IOMMU: - Disable ATS for Intel IPU E2000 devices with invalidation message endianness erratum (Bartosz Pawlowski) Error handling: - Factor out interrupt enable/disable into helpers (Kai-Heng Feng) Peer-to-peer DMA: - Fix flexible-array usage in struct pci_p2pdma_pagemap in case we ever use pagemaps with multiple entries (Gustavo A. R. Silva) ASPM: - Revert a change that broke when drivers disabled L1 and users later enabled an L1.x substate via sysfs, and fix a similar issue when users disabled L1 via sysfs (Heiner Kallweit) Endpoint framework: - Fix double free in __pci_epc_create() (Dan Carpenter) - Use IS_ERR_OR_NULL() to simplify endpoint core (Ruan Jinjie) Cadence PCIe controller driver: - Drop unused "is_rc" member (Li Chen) Freescale Layerscape PCIe controller driver: - Enable 64-bit addressing in endpoint mode (Guanhua Gao) Intel VMD host bridge driver: - Fix multi-function header check (Ilpo Järvinen) Microsoft Hyper-V host bridge driver: - Annotate struct hv_dr_state with __counted_by (Kees Cook) NVIDIA Tegra194 PCIe controller driver: - Drop setting of LNKCAP_MLW (max link width) since dw_pcie_setup() already does this via dw_pcie_link_set_max_link_width() (Yoshihiro Shimoda) Qualcomm PCIe controller driver: - Use PCIE_SPEED2MBS_ENC() to simplify encoding of link speed (Manivannan Sadhasivam) - Add a .write_dbi2() callback so DBI2 register writes, e.g., for setting the BAR size, work correctly (Manivannan Sadhasivam) - Enable ASPM for platforms that use 1.9.0 ops, because the PCI core doesn't enable ASPM states that haven't been enabled by the firmware (Manivannan Sadhasivam) Renesas R-Car Gen4 PCIe controller driver: - Add DesignWare core support (set max link width, EDMA_UNROLL flag, .pre_init(), .deinit(), etc) for use by R-Car Gen4 driver (Yoshihiro Shimoda) - Add driver and DT schema for DesignWare-based Renesas R-Car Gen4 controller in both host and endpoint mode (Yoshihiro Shimoda) Xilinx NWL PCIe controller driver: - Update ECAM size to support 256 buses (Thippeswamy Havalige) - Stop setting bridge primary/secondary/subordinate bus numbers, since PCI core does this (Thippeswamy Havalige) Xilinx XDMA controller driver: - Add driver and DT schema for Zynq UltraScale+ MPSoCs devices with Xilinx XDMA Soft IP (Thippeswamy Havalige) Miscellaneous: - Use FIELD_GET()/FIELD_PREP() to simplify and reduce use of _SHIFT macros (Ilpo Järvinen, Bjorn Helgaas) - Remove logic_outb(), _outw(), outl() duplicate declarations (John Sanpe) - Replace unnecessary UTF-8 in Kconfig help text because menuconfig doesn't render it correctly (Liu Song)" * tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (102 commits) PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word() PCI: endpoint: Fix double free in __pci_epc_create() PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge PCI: xilinx-cpm: Move IRQ definitions to a common header PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields PCI: hotplug: Add Ampere Altra Attention Indicator extension driver PCI/AER: Factor out interrupt toggling into helpers PCI: acpiphp: Allow built-in drivers for Attention Indicators PCI/portdrv: Use FIELD_GET() PCI/VC: Use FIELD_GET() PCI/PTM: Use FIELD_GET() PCI/PME: Use FIELD_GET() PCI/ATS: Use FIELD_GET() PCI/ATS: Show PASID Capability register width in bitmasks PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common() ...

Merge branch 'pci/field-get'

2023-10-28T18:31:05Z

- Use FIELD_GET()/FIELD_PREP() when possible throughout drivers/pci/ (Ilpo Järvinen, Bjorn Helgaas) - Rework DPC control programming for clarity (Ilpo Järvinen) * pci/field-get: PCI/portdrv: Use FIELD_GET() PCI/VC: Use FIELD_GET() PCI/PTM: Use FIELD_GET() PCI/PME: Use FIELD_GET() PCI/ATS: Use FIELD_GET() PCI/ATS: Show PASID Capability register width in bitmasks PCI: Use FIELD_GET() in Sapphire RX 5600 XT Pulse quirk PCI: Use FIELD_GET() PCI/MSI: Use FIELD_GET/PREP() PCI/DPC: Use defines with DPC reason fields PCI/DPC: Use defined fields with DPC_CTL register PCI/DPC: Use FIELD_GET() PCI: hotplug: Use FIELD_GET/PREP() PCI: dwc: Use FIELD_GET/PREP() PCI: cadence: Use FIELD_GET() PCI: Use FIELD_GET() to extract Link Width PCI: mvebu: Use FIELD_PREP() with Link Width PCI: tegra194: Use FIELD_GET()/FIELD_PREP() with Link Width fields # Conflicts: # drivers/pci/controller/dwc/pcie-tegra194.c

Merge branch 'pci/config-errs'

2023-10-28T18:31:03Z

- Simplify config accessor error checking (Ilpo Järvinen) * pci/config-errs: scsi: ipr: Do PCI error checks on own line PCI: xgene: Do PCI error check on own line & keep return value PCI: Do error check on own line to split long "if" conditions atm: iphase: Do PCI error checks on own line sh: pci: Do PCI error check on own line alpha: Streamline convoluted PCI error handling

Merge branch 'pci/controller/xilinx-xdma'

2023-10-28T18:31:02Z

- Move Xilinx IRQ definitions to a common header shared by pcie-xilinx-cpm and xilinx-xdma (Thippeswamy Havalige) - Add Xilinx XDMA driver and DT schema (Thippeswamy Havalige) * pci/controller/xilinx-xdma: PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge PCI: xilinx-cpm: Move IRQ definitions to a common header

Merge branch 'pci/controller/xilinx-ecam'

2023-10-28T18:31:02Z

- Drop xilinx-nwl updates of bridge bus number fields, since PCI core already does that (Thippeswamy Havalige) - Update xilinx-nwl driver and ECAM size in devicetree example to allow up to 256 buses (Thippeswamy Havalige) * pci/controller/xilinx-ecam: PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields

Merge branch 'pci/controller/vmd'

2023-10-28T18:31:02Z

- Fix space/tab whitespace issue (Xinghui Li) * pci/controller/vmd: PCI: vmd: Fix inconsistent indentation in vmd_resume()