linux/drivers/pci/hotplug, branch v4.9

Merge tag 'powerpc-4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2016-10-08T03:19:31Z

Pull powerpc updates from Michael Ellerman: "Highlights: - Major rework of Book3S 64-bit exception vectors (Nicholas Piggin) - Use gas sections for arranging exception vectors et. al. - Large set of TM cleanups and selftests (Cyril Bur) - Enable transactional memory (TM) lazily for userspace (Cyril Bur) - Support for XZ compression in the zImage wrapper (Oliver O'Halloran) - Add support for bpf constant blinding (Naveen N. Rao) - Beginnings of upstream support for PA Semi Nemo motherboards (Darren Stevens) Fixes: - Ensure .mem(init|exit).text are within _stext/_etext (Michael Ellerman) - xmon: Don't use ld on 32-bit (Michael Ellerman) - vdso64: Use double word compare on pointers (Anton Blanchard) - powerpc/nvram: Fix an incorrect partition merge (Pan Xinhui) - powerpc: Fix usage of _PAGE_RO in hugepage (Christophe Leroy) - powerpc/mm: Update FORCE_MAX_ZONEORDER range to allow hugetlb w/4K (Aneesh Kumar K.V) - Fix memory leak in queue_hotplug_event() error path (Andrew Donnellan) - Replay hypervisor maintenance interrupt first (Nicholas Piggin) Various performance optimisations (Anton Blanchard): - Align hot loops of memset() and backwards_memcpy() - During context switch, check before setting mm_cpumask - Remove static branch prediction in atomic{, 64}_add_unless - Only disable HAVE_EFFICIENT_UNALIGNED_ACCESS on POWER7 little endian - Set default CPU type to POWER8 for little endian builds Cleanups & features: - Sparse fixes/cleanups (Daniel Axtens) - Preserve CFAR value on SLB miss caused by access to bogus address (Paul Mackerras) - Radix MMU fixups for POWER9 (Aneesh Kumar K.V) - Support for setting used_(vsr|vr|spe) in sigreturn path (for CRIU) (Simon Guo) - Optimise syscall entry for virtual, relocatable case (Nicholas Piggin) - Optimise MSR handling in exception handling (Nicholas Piggin) - Support for kexec with Radix MMU (Benjamin Herrenschmidt) - powernv EEH fixes (Russell Currey) - Suprise PCI hotplug support for powernv (Gavin Shan) - Endian/sparse fixes for powernv PCI (Gavin Shan) - Defconfig updates (Anton Blanchard) - KVM: PPC: Book3S HV: Migrate pinned pages out of CMA (Balbir Singh) - cxl: Flush PSL cache before resetting the adapter (Frederic Barrat) - cxl: replace loop with for_each_child_of_node(), remove unneeded of_node_put() (Andrew Donnellan) - Fix HV facility unavailable to use correct handler (Nicholas Piggin) - Remove unnecessary syscall trampoline (Nicholas Piggin) - fadump: Fix build break when CONFIG_PROC_VMCORE=n (Michael Ellerman) - Quieten EEH message when no adapters are found (Anton Blanchard) - powernv: Add PHB register dump debugfs handle (Russell Currey) - Use kprobe blacklist for exception handlers & asm functions (Nicholas Piggin) - Document the syscall ABI (Nicholas Piggin) - MAINTAINERS: Update cxl maintainers (Michael Neuling) - powerpc: Remove all usages of NO_IRQ (Michael Ellerman) Minor cleanups: - Andrew Donnellan, Christophe Leroy, Colin Ian King, Cyril Bur, Frederic Barrat, Pan Xinhui, PrasannaKumar Muralidharan, Rui Teng, Simon Guo" * tag 'powerpc-4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (156 commits) powerpc/bpf: Add support for bpf constant blinding powerpc/bpf: Implement support for tail calls powerpc/bpf: Introduce accessors for using the tmp local stack space powerpc/fadump: Fix build break when CONFIG_PROC_VMCORE=n powerpc: tm: Enable transactional memory (TM) lazily for userspace powerpc/tm: Add TM Unavailable Exception powerpc: Remove do_load_up_transact_{fpu,altivec} powerpc: tm: Rename transct_(*) to ck(\1)_state powerpc: tm: Always use fp_state and vr_state to store live registers selftests/powerpc: Add checks for transactional VSXs in signal contexts selftests/powerpc: Add checks for transactional VMXs in signal contexts selftests/powerpc: Add checks for transactional FPUs in signal contexts selftests/powerpc: Add checks for transactional GPRs in signal contexts selftests/powerpc: Check that signals always get delivered selftests/powerpc: Add TM tcheck helpers in C selftests/powerpc: Allow tests to extend their kill timeout selftests/powerpc: Introduce GPR asm helper header file selftests/powerpc: Move VMX stack frame macros to header file selftests/powerpc: Rework FPU stack placement macros and move to header file selftests/powerpc: Check for VSX preservation across userspace preemption ...

drivers/pci/hotplug: Use of_property_read_u32() in powernv driver

2016-10-04T05:22:47Z

This replaces of_get_property() with of_property_read_u32() or of_property_read_string() so that we needn't consider the endian issue, the returned value always is in CPU-endian. Signed-off-by: Gavin Shan [mpe: Fold in the change to the "ibm,slot-surprise-pluggable" case] Signed-off-by: Michael Ellerman

Merge branch 'pci/hotplug' into next

2016-10-03T14:43:19Z

* pci/hotplug: x86/PCI: VMD: Request userspace control of PCIe hotplug indicators PCI: pciehp: Allow exclusive userspace control of indicators PCI: pciehp: Remove useless pciehp_get_latch_status() calls PCI: pciehp: Clean up dmesg "Slot(%s)" messages PCI: pciehp: Remove unnecessary guard PCI: pciehp: Don't re-read Slot Status when handling surprise event PCI: pciehp: Don't re-read Slot Status when queuing hotplug event PCI: pciehp: Process all hotplug events before looking for new ones PCI: pciehp: Return IRQ_NONE when we can't read interrupt status PCI: pciehp: Rename pcie_isr() locals for clarity PCI: pciehp: Clear attention LED on device add

drivers/pci/hotplug: Support surprise hotplug in powernv driver

2016-09-29T05:02:28Z

This supports PCI surprise hotplug. The design is highlighted as below: * The PCI slot's surprise hotplug capability is exposed through device node property "ibm,slot-surprise-pluggable", meaning PCI surprise hotplug will be disabled if skiboot doesn't support it yet. * The interrupt because of presence or link state change is raised on surprise hotplug event. One event is allocated and queued to the PCI slot for workqueue to pick it up and process in serialized fashion. The code flow for surprise hotplug is same to that for managed hotplug except: the affected PEs are put into frozen state to avoid unexpected EEH error reporting in surprise hot remove path. Signed-off-by: Gavin Shan Signed-off-by: Michael Ellerman

drivers/pci/hotplug: Remove likely() and unlikely() in powernv driver

2016-09-29T05:01:55Z

This removes likely() and unlikely() in pnv_php.c as the code isn't running in hot path. Those macros to affect CPU's branch stream don't help a lot for performance. I used them to identify the cases are likely or unlikely to happen. No logical changes introduced. Signed-off-by: Gavin Shan Signed-off-by: Michael Ellerman

PCI: pciehp: Allow exclusive userspace control of indicators

2016-09-22T23:20:11Z

PCIe hotplug supports optional Attention and Power Indicators, which are used internally by pciehp. Users can't control the Power Indicator, but they can control the Attention Indicator by writing to a sysfs "attention" file. The Slot Control register has two bits for each indicator, and the PCIe spec defines the encodings for each as (Reserved/On/Blinking/Off). For sysfs "attention" writes, pciehp_set_attention_status() maps into these encodings, so the only useful write values are 0 (Off), 1 (On), and 2 (Blinking). However, some platforms use all four bits for platform-specific indicators, and they need to allow direct user control of them while preventing pciehp from using them at all. Add a "hotplug_user_indicators" flag to the pci_dev structure. When set, pciehp does not use either the Attention Indicator or the Power Indicator, and the low four bits (values 0x0 - 0xf) of sysfs "attention" write values are written directly to the Attention Indicator Control and Power Indicator Control fields. [bhelgaas: changelog, rename flag and accessors to s/attention/indicator/] Signed-off-by: Keith Busch Signed-off-by: Bjorn Helgaas

PCI: pciehp: Remove useless pciehp_get_latch_status() calls

2016-09-14T19:25:05Z

Long ago, we updated a "switch_save" field based on the latch status. But switch_save was unused, and ed6cbcf2ac70 ("[PATCH] pciehp: miscellaneous cleanups") removed it. We no longer use the latch status, so remove calls to pciehp_get_latch_status(). No functional change intended. Tested-by: Lukas Wunner Signed-off-by: Bjorn Helgaas Reviewed-by: Mika Westerberg

PCI: pciehp: Clean up dmesg "Slot(%s)" messages

2016-09-14T19:25:00Z

Print slot name consistently as "Slot(%s)". I don't know whether that's ideal, but we can at least do it the same way all the time. No functional change intended. Tested-by: Lukas Wunner Signed-off-by: Bjorn Helgaas Reviewed-by: Mika Westerberg

PCI: pciehp: Remove unnecessary guard

2016-09-14T19:24:54Z

In pcie_isr(), we return early if no status bits other than PCI_EXP_SLTSTA_CC are set. This was introduced by dbd79aed1aea ("pciehp: fix NULL dereference in interrupt handler"), but it is no longer necessary because all the subsequent pcie_isr() code is already predicated on a status bit being set. Remove the unnecessary test for ~PCI_EXP_SLTSTA_CC. No functional change intended. Tested-by: Lukas Wunner Signed-off-by: Bjorn Helgaas Reviewed-by: Mika Westerberg

PCI: pciehp: Don't re-read Slot Status when handling surprise event

2016-09-14T19:24:45Z

Previously we read Slot Status when handling a surprise event. But Slot Status might have changed since we identified the event, and the event_type already tells us whether to enable or disable the slot, so there's no need to read it again. Remove handle_surprise_event() and queue the power work directly. [bhelgaas: changelog] Tested-by: Lukas Wunner Signed-off-by: Mayurkumar Patel Signed-off-by: Bjorn Helgaas Reviewed-by: Mika Westerberg Acked-by: Rajat Jain