linux/drivers/pci/hotplug, branch v6.7

Revert "PCI: acpiphp: Reassign resources on bridge if necessary"

2023-12-15T20:55:10Z

This reverts commit 40613da52b13fb21c5566f10b287e0ca8c12c4e9 and the subsequent fix to it: cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus") 40613da52b13 fixed a problem where hot-adding a device with large BARs failed if the bridge windows programmed by firmware were not large enough. cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus") fixed a problem with 40613da52b13: an ACPI hot-add of a device on a PCI root bus (common in the virt world) or firmware sending ACPI Bus Check to non-existent Root Ports (e.g., on Dell Inspiron 7352/0W6WV0) caused a NULL pointer dereference and suspend/resume hangs. Unfortunately the combination of 40613da52b13 and cc22522fd55e caused other problems: - Fiona reported that hot-add of SCSI disks in QEMU virtual machine fails sometimes. - Dongli reported a similar problem with hot-add of SCSI disks. - Jonathan reported a console freeze during boot on bare metal due to an error in radeon GPU initialization. Revert both patches to avoid adding these problems. This means we will again see the problems with hot-adding devices with large BARs and the NULL pointer dereferences and suspend/resume issues that 40613da52b13 and cc22522fd55e were intended to fix. Fixes: 40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary") Fixes: cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus") Reported-by: Fiona Ebner Closes: https://lore.kernel.org/r/9eb669c0-d8f2-431d-a700-6da13053ae54@proxmox.com Reported-by: Dongli Zhang Closes: https://lore.kernel.org/r/3c4a446a-b167-11b8-f36f-d3c1b49b42e9@oracle.com Reported-by: Jonathan Woithe Closes: https://lore.kernel.org/r/ZXpaNCLiDM+Kv38H@marvin.atrad.com.au Signed-off-by: Bjorn Helgaas Acked-by: Michael S. Tsirkin Acked-by: Igor Mammedov Cc:

Merge branch 'pci/field-get'

2023-10-28T18:31:05Z

- Use FIELD_GET()/FIELD_PREP() when possible throughout drivers/pci/ (Ilpo Järvinen, Bjorn Helgaas) - Rework DPC control programming for clarity (Ilpo Järvinen) * pci/field-get: PCI/portdrv: Use FIELD_GET() PCI/VC: Use FIELD_GET() PCI/PTM: Use FIELD_GET() PCI/PME: Use FIELD_GET() PCI/ATS: Use FIELD_GET() PCI/ATS: Show PASID Capability register width in bitmasks PCI: Use FIELD_GET() in Sapphire RX 5600 XT Pulse quirk PCI: Use FIELD_GET() PCI/MSI: Use FIELD_GET/PREP() PCI/DPC: Use defines with DPC reason fields PCI/DPC: Use defined fields with DPC_CTL register PCI/DPC: Use FIELD_GET() PCI: hotplug: Use FIELD_GET/PREP() PCI: dwc: Use FIELD_GET/PREP() PCI: cadence: Use FIELD_GET() PCI: Use FIELD_GET() to extract Link Width PCI: mvebu: Use FIELD_PREP() with Link Width PCI: tegra194: Use FIELD_GET()/FIELD_PREP() with Link Width fields # Conflicts: # drivers/pci/controller/dwc/pcie-tegra194.c

Merge branch 'pci/hotplug'

2023-10-28T18:30:58Z

- Add driver for Ampere Altra Attention Indicators (D Scott Phillips) * pci/hotplug: PCI: hotplug: Add Ampere Altra Attention Indicator extension driver PCI: acpiphp: Allow built-in drivers for Attention Indicators

PCI: hotplug: Add Ampere Altra Attention Indicator extension driver

2023-10-26T11:02:10Z

On Ampere Altra, PCIe hotplug is handled through ACPI. A side interface is also present to request system firmware control of the hotplug Attention Indicators. Add an ACPI PCI Hotplug companion driver to support Attention Indicator control. Link: https://lore.kernel.org/r/20230930002036.6491-2-scott@os.amperecomputing.com Signed-off-by: D Scott Phillips [bhelgaas: mask domain to low 4 bits] Signed-off-by: Bjorn Helgaas Acked-by: "Rafael J. Wysocki"

PCI: acpiphp: Allow built-in drivers for Attention Indicators

2023-10-25T18:05:37Z

Since the introduction of the attention callback in acpiphp, a non-zero struct module *owner has been required in acpiphp_register_attention(). The intent seemed to be that the core code could hold a refcount on the module while invoking a callback. This check accidentally precludes the possibility of attention callbacks to built-in drivers. Remove the check on `struct module *owner` in acpiphp_register_attention() so attention callbacks can also be registered from built-in drivers. Link: https://lore.kernel.org/r/20230930002036.6491-1-scott@os.amperecomputing.com Signed-off-by: D Scott Phillips Signed-off-by: Bjorn Helgaas

PCI: hotplug: Use FIELD_GET/PREP()

2023-10-24T15:54:04Z

Instead of handcrafted shifts to handle register fields, use FIELD_GET/FIELD_PREP(). Link: https://lore.kernel.org/r/20231018113254.17616-4-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen Signed-off-by: Bjorn Helgaas

PCI: Use PCI_HEADER_TYPE_* instead of literals

2023-10-03T16:55:59Z

Replace literals under drivers/pci/ with PCI_HEADER_TYPE_MASK, PCI_HEADER_TYPE_NORMAL, and PCI_HEADER_TYPE_MFD. Also replace !! boolean conversions with FIELD_GET(). Link: https://lore.kernel.org/r/20231003125300.5541-4-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen Signed-off-by: Bjorn Helgaas Reviewed-by: Wolfram Sang # for Renesas R-Car

Merge tag 'powerpc-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2023-08-31T19:43:10Z

Pull powerpc updates from Michael Ellerman: - Add HOTPLUG_SMT support (/sys/devices/system/cpu/smt) and honour the configured SMT state when hotplugging CPUs into the system - Combine final TLB flush and lazy TLB mm shootdown IPIs when using the Radix MMU to avoid a broadcast TLBIE flush on exit - Drop the exclusion between ptrace/perf watchpoints, and drop the now unused associated arch hooks - Add support for the "nohlt" command line option to disable CPU idle - Add support for -fpatchable-function-entry for ftrace, with GCC >= 13.1 - Rework memory block size determination, and support 256MB size on systems with GPUs that have hotpluggable memory - Various other small features and fixes Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev, Benjamin Gray, Christophe Leroy, Frederic Barrat, Gautam Menghani, Geoff Levand, Hari Bathini, Immad Mir, Jialin Zhang, Joel Stanley, Jordan Niethe, Justin Stitt, Kajol Jain, Kees Cook, Krzysztof Kozlowski, Laurent Dufour, Liang He, Linus Walleij, Mahesh Salgaonkar, Masahiro Yamada, Michal Suchanek, Nageswara R Sastry, Nathan Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nick Desaulniers, Omar Sandoval, Randy Dunlap, Reza Arbab, Rob Herring, Russell Currey, Sourabh Jain, Thomas Gleixner, Trevor Woerner, Uwe Kleine-König, Vaibhav Jain, Xiongfeng Wang, Yuan Tan, Zhang Rui, and Zheng Zengkai. * tag 'powerpc-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (135 commits) macintosh/ams: linux/platform_device.h is needed powerpc/xmon: Reapply "Relax frame size for clang" powerpc/mm/book3s64: Use 256M as the upper limit with coherent device memory attached powerpc/mm/book3s64: Fix build error with SPARSEMEM disabled powerpc/iommu: Fix notifiers being shared by PCI and VIO buses powerpc/mpc5xxx: Add missing fwnode_handle_put() powerpc/config: Disable SLAB_DEBUG_ON in skiroot powerpc/pseries: Remove unused hcall tracing instruction powerpc/pseries: Fix hcall tracepoints with JUMP_LABEL=n powerpc: dts: add missing space before { powerpc/eeh: Use pci_dev_id() to simplify the code powerpc/64s: Move CPU -mtune options into Kconfig powerpc/powermac: Fix unused function warning powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT powerpc: Don't include lppaca.h in paca.h powerpc/pseries: Move hcall_vphn() prototype into vphn.h powerpc/pseries: Move VPHN constants into vphn.h cxl: Drop unused detach_spa() powerpc: Drop zalloc_maybe_bootmem() powerpc/powernv: Use struct opal_prd_msg in more places ...

Merge tag 'pci-v6.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2023-08-31T03:23:07Z

Pull PCI updates from Bjorn Helgaas: "Enumeration: - Add locking to read/modify/write PCIe Capability Register accessors for Link Control and Root Control - Use pci_dev_id() when possible instead of manually composing ID from dev->bus->number and dev->devfn Resource management: - Move prototypes for __weak sysfs resource files to linux/pci.h to fix 'no previous prototype' warnings - Make more I/O port accesses depend on HAS_IOPORT - Use devm_platform_get_and_ioremap_resource() instead of open-coding platform_get_resource() followed by devm_ioremap_resource() Power management: - Ensure devices are powered up while accessing VPD - If device is powered-up, keep it that way while polling for PME - Only read PCI_PM_CTRL register when available, to avoid reading the wrong register and corrupting dev->current_state Virtualization: - Avoid Secondary Bus Reset on NVIDIA T4 GPUs Error handling: - Remove unused pci_disable_pcie_error_reporting() - Unexport pci_enable_pcie_error_reporting(), used only by aer.c - Unexport pcie_port_bus_type, used only by PCI core VGA: - Simplify and clean up typos in VGA arbiter Apple PCIe controller driver: - Initialize pcie->nvecs (number of available MSIs) before use Broadcom iProc PCIe controller driver: - Use of_property_read_bool() instead of low-level accessors for boolean properties Broadcom STB PCIe controller driver: - Assert PERST# when probing BCM2711 because some bootloaders don't do it Freescale i.MX6 PCIe controller driver: - Add .host_deinit() callback so we can clean up things like regulators on probe failure or driver unload Freescale Layerscape PCIe controller driver: - Add support for link-down notification so the endpoint driver can process LINK_DOWN events - Add suspend/resume support, including manual PME_Turn_off/PME_TO_Ack handshake - Save Link Capabilities during probe so they can be restored when handling a link-up event, since the controller loses the Link Width and Link Speed values during reset Intel VMD host bridge driver: - Fix disable of bridge windows during domain reset; previously we cleared the base/limit registers, which actually left the windows enabled Marvell MVEBU PCIe controller driver: - Remove unused busn member Microchip PolarFlare PCIe controller driver: - Fix interrupt bit definitions so the SEC and DED interrupt handlers work correctly - Make driver buildable as a module - Read FPGA MSI configuration parameters from hardware instead of hard-coding them Microsoft Hyper-V host bridge driver: - To avoid a NULL pointer dereference, skip MSI restore after hibernate if MSI/MSI-X hasn't been enabled NVIDIA Tegra194 PCIe controller driver: - Revert 'PCI: tegra194: Enable support for 256 Byte payload' because Linux doesn't know how to reduce MPS from to 256 to 128 bytes for endpoints below a switch (because other devices below the switch might already be operating), which leads to 'Malformed TLP' errors Qualcomm PCIe controller driver: - Add DT and driver support for interconnect bandwidth voting for 'pcie-mem' and 'cpu-pcie' interconnects - Fix broken SDX65 'compatible' DT property - Configure controller so MHI bus master clock will be switched off while in ASPM L1.x states - Use alignment restriction from EPF core in EPF MHI driver - Add Endpoint eDMA support - Add MHI eDMA support - Add Snapdragon SM8450 support to the EPF MHI driversupport - Add MHI eDMA support - Add Snapdragon SM8450 support to the EPF MHI driversupport - Add MHI eDMA support - Add Snapdragon SM8450 support to the EPF MHI driversupport - Add MHI eDMA support - Add Snapdragon SM8450 support to the EPF MHI driver - Use iATU for EPF MHI transfers smaller than 4K to avoid eDMA setup latency - Add sa8775p DT binding and driver support Rockchip PCIe controller driver: - Use 64-bit mask on MSI 64-bit PCI address to avoid zeroing out the upper 32 bits SiFive FU740 PCIe controller driver: - Set the supported number of MSI vectors so we can use all available MSI interrupts Synopsys DesignWare PCIe controller driver: - Add generic dwc suspend/resume APIs (dw_pcie_suspend_noirq() and dw_pcie_resume_noirq()) to be called by controller driver suspend/resume ops, and a controller callback to send PME_Turn_Off MicroSemi Switchtec management driver: - Add support for PCIe Gen5 devices Miscellaneous: - Reorder and compress to reduce size of struct pci_dev - Fix race in DOE destroy_work_on_stack() - Add stubs to avoid casts between incompatible function types - Explicitly include correct DT includes to untangle headers" * tag 'pci-v6.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (96 commits) PCI: qcom-ep: Add ICC bandwidth voting support dt-bindings: PCI: qcom: ep: Add interconnects path PCI: qcom-ep: Treat unknown IRQ events as an error dt-bindings: PCI: qcom: Fix SDX65 compatible PCI: endpoint: Add kernel-doc for pci_epc_mem_init() API PCI: epf-mhi: Use iATU for small transfers PCI: epf-mhi: Add support for SM8450 PCI: epf-mhi: Add eDMA support PCI: qcom-ep: Add eDMA support PCI: epf-mhi: Make use of the alignment restriction from EPF core PCI/PM: Only read PCI_PM_CTRL register when available PCI: qcom: Add support for sa8775p SoC dt-bindings: PCI: qcom: Add sa8775p compatible PCI: qcom-ep: Pass alignment restriction to the EPF core PCI: Simplify pcie_capability_clear_and_set_word() control flow PCI: Tidy config space save/restore messages PCI: Fix code formatting inconsistencies PCI: Fix typos in docs and comments PCI: Fix pci_bus_resetable(), pci_slot_resetable() name typos PCI: Simplify pci_dev_driver() ...

Merge branch 'pci/misc'

2023-08-29T16:03:57Z

- Reorder struct pci_dev to avoid holes and reduce size (Christophe JAILLET) - Change pdev->rom_attr_enabled to single bit since it's only a boolean value (Christophe JAILLET) - Use struct_size() in pirq_convert_irt_table() instead of hand-writing it (Christophe JAILLET) - Explicitly include correct DT includes to untangle headers (Rob Herring) - Fix a DOE race between destroy_work_on_stack() and the stack-allocated task->work struct going out of scope in pci_doe() (Ira Weiny) - Use pci_dev_id() when possible instead of manually composing ID from dev->bus->number and dev->devfn (Xiongfeng Wang, Zheng Zengkai) - Move pci_create_resource_files() declarations to linux/pci.h for alpha build warnings (Arnd Bergmann) - Remove unused hotplug function declarations (Yue Haibing) - Remove unused mvebu struct mvebu_pcie.busn (Pali Rohár) - Unexport pcie_port_bus_type (Bjorn Helgaas) - Remove unnecessary sysfs ID local variable initialization (Bjorn Helgaas) - Fix BAR value printk formatting to accommodate 32-bit values (Bjorn Helgaas) - Use consistent pointer types for config access syscall get_user() and put_user() uses (Bjorn Helgaas) - Simplify AER_RECOVER_RING_SIZE definition (Bjorn Helgaas) - Simplify pci_pio_to_address() (Bjorn Helgaas) - Simplify pci_dev_driver() (Bjorn Helgaas) - Fix pci_bus_resetable(), pci_slot_resetable() name typos (Bjorn Helgaas) - Fix code and doc typos and code formatting (Bjorn Helgaas) - Tidy config space save/restore messages (Bjorn Helgaas) * pci/misc: PCI: Tidy config space save/restore messages PCI: Fix code formatting inconsistencies PCI: Fix typos in docs and comments PCI: Fix pci_bus_resetable(), pci_slot_resetable() name typos PCI: Simplify pci_dev_driver() PCI: Simplify pci_pio_to_address() PCI/AER: Simplify AER_RECOVER_RING_SIZE definition PCI: Use consistent put_user() pointer types PCI: Fix printk field formatting PCI: Remove unnecessary initializations PCI: Unexport pcie_port_bus_type PCI: mvebu: Remove unused busn member PCI: Remove unused function declarations PCI/sysfs: Move declarations to linux/pci.h PCI/P2PDMA: Use pci_dev_id() to simplify the code PCI/IOV: Use pci_dev_id() to simplify the code PCI/AER: Use pci_dev_id() to simplify the code PCI: apple: Use pci_dev_id() to simplify the code PCI/DOE: Fix destroy_work_on_stack() race PCI: Explicitly include correct DT includes x86/PCI: Use struct_size() in pirq_convert_irt_table() PCI: Change pdev->rom_attr_enabled to single bit PCI: Reorder pci_dev fields to reduce holes