linux/drivers/perf, branch v5.7

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

2020-03-31T17:05:01Z

Pull arm64 updates from Catalin Marinas: "The bulk is in-kernel pointer authentication, activity monitors and lots of asm symbol annotations. I also queued the sys_mremap() patch commenting the asymmetry in the address untagging. Summary: - In-kernel Pointer Authentication support (previously only offered to user space). - ARM Activity Monitors (AMU) extension support allowing better CPU utilisation numbers for the scheduler (frequency invariance). - Memory hot-remove support for arm64. - Lots of asm annotations (SYM_*) in preparation for the in-kernel Branch Target Identification (BTI) support. - arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the PMU init callbacks, support for new DT compatibles. - IPv6 header checksum optimisation. - Fixes: SDEI (software delegated exception interface) double-lock on hibernate with shared events. - Minor clean-ups and refactoring: cpu_ops accessor, cpu_do_switch_mm() converted to C, cpufeature finalisation helper. - sys_mremap() comment explaining the asymmetric address untagging behaviour" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits) mm/mremap: Add comment explaining the untagging behaviour of mremap() arm64: head: Convert install_el2_stub to SYM_INNER_LABEL arm64: Introduce get_cpu_ops() helper function arm64: Rename cpu_read_ops() to init_cpu_ops() arm64: Declare ACPI parking protocol CPU operation if needed arm64: move kimage_vaddr to .rodata arm64: use mov_q instead of literal ldr arm64: Kconfig: verify binutils support for ARM64_PTR_AUTH lkdtm: arm64: test kernel pointer authentication arm64: compile the kernel with ptrauth return address signing kconfig: Add support for 'as-option' arm64: suspend: restore the kernel ptrauth keys arm64: __show_regs: strip PAC from lr in printk arm64: unwind: strip PAC from kernel addresses arm64: mask PAC bits of __builtin_return_address arm64: initialize ptrauth keys for kernel booting task arm64: initialize and switch ptrauth kernel keys arm64: enable ptrauth earlier arm64: cpufeature: handle conflicts based on capability arm64: cpufeature: Move cpu capability helpers inside C file ...

perf: arm-ccn: Use scnprintf() for robustness

2020-03-17T22:45:56Z

snprintf() is a hard-to-use function, it's especially difficult to use it for concatenating substrings in a buffer with a limited size. Since snprintf() returns the would-be-output size, not the actual size, the subsequent use of snprintf() may point to the incorrect position easily. Although the current code doesn't actually overflow the buffer, it's an incorrect usage. This patch replaces such snprintf() calls with a safer version, scnprintf(). Acked-by: Mark Rutland Signed-off-by: Takashi Iwai Signed-off-by: Will Deacon

drivers/perf: arm_pmu_acpi: Fix incorrect checking of gicc pointer

2020-03-02T12:07:35Z

Fix bogus NULL checks on the return value of acpi_cpu_get_madt_gicc() by checking for a 0 'gicc->performance_interrupt' value instead. Signed-off-by: Liguang Zhang Signed-off-by: Will Deacon

drivers/perf: fsl_imx8_ddr: Correct the CLEAR bit definition

2020-03-02T12:07:19Z

When disabling a counter from ddr_perf_event_stop(), the counter value is reset to 0 at the same time. Preserve the counter value by performing a read-modify-write of the PMU register and clearing only the enable bit. Signed-off-by: Joakim Zhang Signed-off-by: Will Deacon

perf: arm_spe: Remove unnecessary zero check on 'nr_pages'

2020-03-02T11:27:21Z

We already check that the 'nr_pages' is > 2, so there's no need to check that it's != 0 later on. Signed-off-by: Liguang Zhang Signed-off-by: Will Deacon

perf/smmuv3: Use platform_get_irq_optional() for wired interrupt

2020-02-10T18:14:46Z

Even though a SMMUv3 PMCG implementation may use an MSI as the form of interrupt source, the kernel would still complain that it does not find the wired (GSIV) interrupt in this case: root@(none)$ dmesg | grep arm-smmu-v3-pmcg | grep "not found" [ 59.237219] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.8.auto: IRQ index 0 not found [ 59.322841] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.9.auto: IRQ index 0 not found [ 59.422155] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.10.auto: IRQ index 0 not found [ 59.539014] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.11.auto: IRQ index 0 not found [ 59.640329] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.12.auto: IRQ index 0 not found [ 59.743112] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.13.auto: IRQ index 0 not found [ 59.880577] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.14.auto: IRQ index 0 not found [ 60.017528] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.15.auto: IRQ index 0 not found Use platform_get_irq_optional() to silence the warning. If neither interrupt source is found, then the driver will still warn that IRQ setup errored and the probe will fail. Reviewed-by: Robin Murphy Signed-off-by: John Garry Signed-off-by: Will Deacon

perf/imx_ddr: Fix cpu hotplug state cleanup

2020-01-15T12:48:40Z

This driver allocates a dynamic cpu hotplug state but never releases it. If reloaded in a loop it will quickly trigger a WARN message: "No more dynamic states available for CPU hotplug" Fix by calling cpuhp_remove_multi_state on remove like several other perf pmu drivers. Also fix the cleanup logic on probe error paths: add the missing cpuhp_remove_multi_state call and properly check the return value from cpuhp_state_add_instant_nocalls. Fixes: 9a66d36cc7ac ("drivers/perf: imx_ddr: Add DDR performance counter support to perf") Acked-by: Joakim Zhang Signed-off-by: Leonard Crestez Signed-off-by: Will Deacon

drivers/perf: hisi: Simplify hisi_read_sccl_and_ccl_id and its comment

2020-01-10T15:58:57Z

hisi_read_sccl_and_ccl_id is not readable and its comment is a little confused, so simplify the function and its comment as Mark's suggestion. Acked-by: Mark Rutland Reviewed-by: John Garry Suggested-by: Mark Rutland Signed-off-by: Shaokun Zhang Signed-off-by: Will Deacon

perf/smmuv3: Remove the leftover put_cpu() in error path

2019-12-18T16:15:36Z

In smmu_pmu_probe(), there is put_cpu() in the error path, which is wrong because we use raw_smp_processor_id() to get the cpu ID, not get_cpu(), remove it. While we are at it, kill 'out_cpuhp_err' altogether and just return err if we fail to add the hotplug instance. Acked-by: Robin Murphy Acked-by: Will Deacon Signed-off-by: Hanjun Guo Signed-off-by: Catalin Marinas

drivers/perf: hisi: update the sccl_id/ccl_id for certain HiSilicon platform

2019-11-07T13:07:55Z

For some HiSilicon platform, the originally designed SCCL_ID and CCL_ID are not satisfied with much rich topology when the MT is set, so we extend the SCCL_ID to MPIDR[aff3] and CCL_ID to MPIDR[aff2]. Let's update this for HiSilicon uncore PMU driver. Cc: John Garry Cc: Hanjun Guo Cc: Mark Rutland Cc: Will Deacon Signed-off-by: Shaokun Zhang Signed-off-by: Will Deacon