linux/drivers/phy/Makefile, branch v3.16

phy: Add new Exynos5 USB 3.0 PHY driver

2014-05-13T12:37:08Z

Add a new driver for the USB 3.0 PHY on Exynos5 series of SoCs. The new driver uses the generic PHY framework and will interact with DWC3 controller present on Exynos5 series of SoCs. Also, created a new header file in linux/mfd/syscon/ for Exynos5 SoCs and put the required PMU offset definitions for the basic available PHYs. Signed-off-by: Vivek Gautam Signed-off-by: Kishon Vijay Abraham I

phy: exynos: fix building as a module

2014-04-24T19:53:38Z

The top-level phy-samsung-usb2 driver may be configured as a loadable module, which currently causes link errors because of the dependency on the exynos{5250,4x12,4210}_usb2_phy_config symbol. Solving this could be achieved by exporting these symbols, but as the SoC-specific parts of the driver are not currently built as modules, it seems better to just link everything into one module and avoid the need for the export. Signed-off-by: Arnd Bergmann Acked-by: Kamil Debski Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman

PHY: add APM X-Gene SoC 15Gbps Multi-purpose PHY driver

2014-03-09T07:15:13Z

This patch adds support for the APM X-Gene SoC 15Gbps Multi-purpose PHY. This is the physical layer interface for the corresponding host controller. Currently, only external clock and Gen3 SATA mode are supported. Signed-off-by: Loc Ho Signed-off-by: Tuan Phan Signed-off-by: Suman Tripathi Signed-off-by: Kishon Vijay Abraham I

phy: rename struct omap_control_usb to struct omap_control_phy

2014-03-09T07:15:08Z

Rename struct omap_control_usb to struct omap_control_phy since it can be used to control PHY of USB, SATA and PCIE. Also move the driver and include files under *phy* and made the corresponding changes in the users of phy-omap-control. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Roger Quadros Acked-by: Felipe Balbi

phy: Add Exynos 5250 support to the Exynos USB 2.0 PHY driver

2014-03-08T07:09:44Z

Add support for Exynos 5250. This driver is to replace the old USB 2.0 PHY driver. Signed-off-by: Kamil Debski Signed-off-by: Kishon Vijay Abraham I

phy: Add new Exynos USB 2.0 PHY driver

2014-03-08T07:09:44Z

Add a new driver for the Exynos USB 2.0 PHY. The new driver uses the generic PHY framework. The driver includes support for the Exynos 4x10 and 4x12 SoC families. Signed-off-by: Kamil Debski Reviewed-by: Tomasz Figa Signed-off-by: Kishon Vijay Abraham I

drivers: phy: usb3/pipe3: Adapt pipe3 driver to Generic PHY Framework

2014-03-06T09:19:33Z

Adapted omap-usb3 PHY driver to Generic PHY Framework and moved phy-omap-usb3 driver in drivers/usb/phy to drivers/phy and also renamed the file to phy-ti-pipe3 since this same driver will be used for SATA PHY and PCIE PHY. Signed-off-by: Kishon Vijay Abraham I

PHY: sunxi: Add driver for sunxi usb phy

2014-03-03T13:20:09Z

The Allwinner A1x / A2x SoCs have 2 or 3 usb phys which are all accessed through a single set of registers. Besides this there are also some other phy related bits which need poking, which are per phy, but shared between the ohci and ehci controllers, so these are also controlled from this new phy driver. Signed-off-by: Hans de Goede Acked-by: Maxime Ripard Signed-off-by: Kishon Vijay Abraham I

PHY: Exynos: Add Exynos5250 SATA PHY driver

2014-03-03T13:20:09Z

This patch adds the SATA PHY driver for Exynos5250.This driver uses the generic PHY framework to deal with SATA PHY.Exynos5250 SATA PHY comprises of CMU and TRSV blocks which are of I2C register Map.So this driver configures the CMU and TRSV block of exynos5250 SATA PHY using i2c. Signed-off-by: Yuvaraj Kumar C D Signed-off-by: Girish K S Signed-off-by: Vasanth Ananthan Signed-off-by: Kishon Vijay Abraham I

Merge tag 'usb-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2014-01-21T00:13:02Z

Pull USB updates from Greg KH: "Here's the big USB pull request for 3.14-rc1 Lots of little things all over the place, and the usual USB gadget updates, and XHCI fixes (some for an issue reported by a lot of people). USB PHY updates as well as chipidea updates and fixes. All of these have been in the linux-next tree with no reported issues" * tag 'usb-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (318 commits) usb: chipidea: udc: using MultO at TD as real mult value for ISO-TX usb: chipidea: need to mask INT_STATUS when write otgsc usb: chipidea: put hw_phymode_configure before ci_usb_phy_init usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28 usb: chipidea: add freescale imx28 special write register method usb: ehci: add freescale imx28 special write register method usb: core: check for valid id_table when using the RefId feature usb: cdc-wdm: resp_count can be 0 even if WDM_READ is set usb: core: bail out if user gives an unknown RefId when using new_id usb: core: allow a reference device for new_id usb: core: add sanity checks when using bInterfaceClass with new_id USB: image: correct spelling mistake in comment USB: c67x00: correct spelling mistakes in comments usb: delete non-required instances of include usb:hub set hub->change_bits when over-current happens Revert "usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28" xhci: Set scatter-gather limit to avoid failed block writes. xhci: Avoid infinite loop when sg urb requires too many trbs usb: gadget: remove unused variable in gr_queue_int() ...