linux/drivers/phy/Makefile, branch v4.1

phy: Add driver to support individual USB PHYs on sun9i

2015-04-03T12:46:19Z

Unlike previous Allwinner SoCs, there is no central PHY control block on the A80. Also, OTG support is completely split off into a different controller. This adds a new driver to support the regular USB PHYs. Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard Signed-off-by: Kishon Vijay Abraham I

phy: Add a driver for dm816x USB PHY

2015-04-03T12:46:19Z

Add a minimal driver for dm816x USB. This makes USB work on dm816x without any other changes needed as it can use the existing musb_dsps glue layer for the USB controller. Note that this phy is different from dm814x and am335x. Cc: Bin Liu Cc: Brian Hutchinson Cc: Felipe Balbi Cc: Matthijs van Duin Cc: Paul Bolle Cc: Rusty Russell Signed-off-by: Tony Lindgren Signed-off-by: Kishon Vijay Abraham I

Merge tag 'usb-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2015-02-15T18:24:55Z

Pull USB patches from Greg KH: "Here's the big pull request for the USB driver tree for 3.20-rc1. Nothing major happening here, just lots of gadget driver updates, new device ids, and a bunch of cleanups. All of these have been in linux-next for a while with no reported issues" * tag 'usb-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (299 commits) usb: musb: fix device hotplug behind hub usb: dwc2: Fix a bug in reading the endpoint directions from reg. staging: emxx_udc: fix the build error usb: Retry port status check on resume to work around RH bugs Revert "usb: Reset USB-3 devices on USB-3 link bounce" uhci-hub: use HUB_CHAR_* usb: kconfig: replace PPC_OF with PPC ehci-pci: disable for Intel MID platforms (update) usb: gadget: Kconfig: use bool instead of boolean usb: musb: blackfin: remove incorrect __exit_p() USB: fix use-after-free bug in usb_hcd_unlink_urb() ehci-pci: disable for Intel MID platforms usb: host: pci_quirks: joing string literals USB: add flag for HCDs that can't receive wakeup requests (isp1760-hcd) USB: usbfs: allow URBs to be reaped after disconnection cdc-acm: kill unnecessary messages cdc-acm: add sanity checks usb: phy: phy-generic: Fix USB PHY gpio reset usb: dwc2: fix USB core dependencies usb: renesas_usbhs: fix NULL pointer dereference in dma_release_channel() ...

phy: add a driver for the Rockchip SoC internal USB2.0 PHY

2015-01-30T10:36:47Z

This patch to add a generic PHY driver for ROCKCHIP usb PHYs, currently this driver can support RK3288. The RK3288 SoC have three independent USB PHY IPs which are all configured through a set of registers located in the GRF (general register files) module. Signed-off-by: Yunzhi Li Tested-by: Doug Anderson Signed-off-by: Kishon Vijay Abraham I

phy: qcom-ufs: add support for 14nm phy

2015-01-20T18:43:26Z

This change adds a support for a 14nm qcom-ufs phy that is required in platforms that use ufs-qcom controller. Signed-off-by: Yaniv Gardi Reviewed-by: Dov Levenglick Signed-off-by: Christoph Hellwig

phy: qcom-ufs: add support for 20nm phy

2015-01-20T18:43:25Z

This change adds a support for a 20nm qcom-ufs phy that is required in platforms that use ufs-qcom controller. Signed-off-by: Yaniv Gardi Reviewed-by: Dov Levenglick Signed-off-by: Christoph Hellwig

phy: qcom-ufs: add support for QUALCOMM Technologies UFS PHY drivers

2015-01-20T18:43:24Z

This change adds a generic and common API support for ufs phy QUALCOMM Technologies. This support provides common code and also points to specific phy callbacks to differentiate between different behaviors of frequent use-cases (like power on, power off, phy calibration etc). Signed-off-by: Yaniv Gardi Reviewed-by: Dov Levenglick Signed-off-by: Christoph Hellwig

phy: add support for USB cluster on the Armada 375 SoC

2014-11-26T05:37:14Z

The Armada 375 SoC comes with an USB2 host and device controller and an USB3 controller. The USB cluster control register allows to manage common features of both USB controllers. This commit adds a driver integrated in the generic PHY framework to control this USB cluster feature. Signed-off-by: Gregory CLEMENT Signed-off-by: Thomas Petazzoni [ kishon@ti.com : Made it to use the updated devm_phy_create API and soem cosmentic changes in Kconfig file.] Signed-off-by: Kishon Vijay Abraham I Acked-by: Jason Cooper

phy: add the Berlin USB PHY driver

2014-11-21T14:18:50Z

Add the driver driving the Marvell Berlin USB PHY. This allows to initialize the PHY and to use it from the USB driver later. Signed-off-by: Antoine Tenart Signed-off-by: Kishon Vijay Abraham I

phy: miphy28lp: Provide support for the MiPHY28lp Generic PHY

2014-11-12T13:10:12Z

The MiPHY28lp is a Generic PHY which can serve various SATA or PCIe or USB3 devices. Signed-off-by: alexandre torgue Signed-off-by: Giuseppe Cavallaro Signed-off-by: Gabriel Fernandez Signed-off-by: Kishon Vijay Abraham I