linux/drivers/phy, branch v5.1

phy: sun4i-usb: Support set_mode to USB_HOST for non-OTG PHYs

2019-03-26T07:48:55Z

While only the first PHY supports mode switching, the remaining PHYs work in USB host mode. They should support set_mode with mode=USB_HOST instead of failing. This is especially needed now that the USB core does set_mode for all USB ports, which was added in commit b97a31348379 ("usb: core: comply to PHY framework"). Make set_mode with mode=USB_HOST a no-op instead of failing for the non-OTG USB PHYs. Fixes: 6ba43c291961 ("phy-sun4i-usb: Add support for phy_set_mode") Signed-off-by: Chen-Yu Tsai Cc: stable Signed-off-by: Greg Kroah-Hartman

Merge tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drm

2019-03-08T16:23:15Z

Pull drm updates from Dave Airlie: "This is the main drm pull request for the 5.1 merge window. The big changes I'd highlight are: - nouveau has HMM support now, there is finally an in-tree user so we can quieten down the rip it out people. - i915 now enables fastboot by default on Skylake+ - Displayport Multistream support has been refactored and should hopefully be more reliable. Core: - header cleanups aiming towards removing drmP.h - dma-buf fence seqnos to 64-bits - common helper for DP mst hotplug for radeon,i915,amdgpu + new refcounting scheme - MST i2c improvements - drm_syncobj_cb removal - ARM FB compression fourcc - P010 + P016 fourcc - allwinner tiled format modifier - i2c over aux I2C_M_STOP support - DRM_AUTH handling fixes TTM: - ref/unref renaming New driver: - ARM komeda display driver scheduler: - refactor mirror list handling - rework hw fence processing - 0 run queue entity fix bridge: - TI DS90C185 LVDS bridge - thc631lvdm83d bridge improvements - cadence + allwinner DSI ported to generic phy panels: - Sitronix ST7701 panel - Kingdisplay KD097D04 - LeMaker BL035-RGB-002 - PDA 91-00156-A0 - Innolux EE101IA-01D i915: - Enable fastboot by default on SKL+/VLV/CHV - Export RPCS configuration for ICL media driver - Coffelake PCI ID - CNL clocks setup fixes - ACPI/PMIC support for MIPI/DSI - Per-engine WA init for all engines - Shrinker locking fixes - Kerneldoc updates - Lots of ring improvements and reset fixes - Coffeelake GVT Support - VFIO GVT EDID Region support - runtime PM wakeref tracking - ILK->IVB primary plane enable delays - userptr mutex locking fixes - DSI fixes - LVDS/TV cleanups - HW readout fixes - LUT robustness fixes - ICL display and watermark fixes - gem mmap race fix amdgpu: - add scheduled dependencies interface - DCC on scanout surfaces - vega10/20 BACO support - Multiple IH rings on soc15 - XGMI locking fixes - DC i2c/aux cleanups - runtime SMU debug interface - Kexec improvmeents - SR-IOV fixes - DC freesync + ABM fixes - GDS fixes - GPUVM fixes - vega20 PCIE DPM switching fixes - Context priority handling fixes radeon: - fix missing break in evergreen parser nouveau: - SVM support via HMM msm: - QCOM Compressed modifier support exynos: - s5pv210 rotator support imx: - zpos property support - pending update fixes v3d: - cache flush improvments vc4: - reflection support - HDMI overscan support tegra: - CEC refactoring - HDMI audio fixes - Tegra186 prep work - SOR crossbar device tree fixes sun4i: - implicit fencing support - YUV and scalar support improvements - A23 support - tiling fixes atmel-hlcdc: - clipping and rotation property fixes qxl: - BO and PRIME improvements - generic fbdev emulation dw-hdmi: - HDMI 2.0 2160p - YUV420 ouput rockchip: - implicit fencing support - reflection proerties virtio-gpu: - use generic fbdev emulation tilcdc: - cpufreq vs crtc init fix rcar-du: - R8A774C0 support - D3/E3 RGB output routing fixes and DPAD0 support - RA87744 LVDS support bochs: - atomic and generic fbdev emulation - ID mismatch error on bochs load meson: - remove firmware fbs" * tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drm: (1130 commits) drm/amd/display: Use vrr friendly pageflip throttling in DC. drm/imx: only send commit done event when all state has been applied drm/imx: allow building under COMPILE_TEST drm/imx: imx-tve: depend on COMMON_CLK drm/imx: ipuv3-plane: add zpos property drm/imx: ipuv3-plane: add function to query atomic update status gpu: ipu-v3: prg: add function to get channel configure status gpu: ipu-v3: pre: add double buffer status readback drm/amdgpu: Bump amdgpu version for context priority override. drm/amdgpu/powerplay: fix typo in BACO header guards drm/amdgpu/powerplay: fix return codes in BACO code drm/amdgpu: add missing license on baco files drm/bochs: Fix the ID mismatch error drm/nouveau/dmem: use dma addresses during migration copies drm/nouveau/dmem: use physical vram addresses during migration copies drm/nouveau/dmem: extend copy function to allow direct use of physical addresses drm/nouveau/svm: new ioctl to migrate process memory to GPU memory drm/nouveau/dmem: device memory helpers for SVM drm/nouveau/svm: initial support for shared virtual memory drm/nouveau: prepare for enabling svm with existing userspace interfaces ...

Merge tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2019-03-07T00:48:27Z

Pull USB/PHY updates from Greg KH: "Here is the big USB/PHY driver pull request for 5.1-rc1. The usual set of gadget driver updates, phy driver updates, xhci updates, and typec additions. Also included in here are a lot of small cleanups and fixes and driver updates where needed. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits) wusb: Remove unnecessary static function ckhdid_printf usb: core: make default autosuspend delay configurable usb: core: Fix typo in description of "authorized_default" usb: chipidea: Refactor USB PHY selection and keep a single PHY usb: chipidea: Grab the (legacy) USB PHY by phandle first usb: chipidea: imx: set power polarity dt-bindings: usb: ci-hdrc-usb2: add property power-active-high usb: chipidea: imx: remove unused header files usb: chipidea: tegra: Fix missed ci_hdrc_remove_device() usb: core: add option of only authorizing internal devices usb: typec: tps6598x: handle block writes separately with plain-I2C adapters usb: xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI usb: xhci: fix build warning - missing prototype usb: xhci: dbc: Fixing typo error. usb: xhci: remove unused member 'parent' in xhci_regset struct xhci: tegra: Prevent error pointer dereference USB: serial: option: add Telit ME910 ECM composition usb: core: Replace hardcoded check with inline function from usb.h usb: core: skip interfaces disabled in devicetree usb: typec: mux: remove redundant check on variable match ...

Merge v5.0-rc7 into drm-next

2019-02-18T03:27:15Z

Backmerging for nouveau and imx that needed some fixes for next pulls. Signed-off-by: Dave Airlie

Merge tag 'phy-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next

2019-02-12T13:59:43Z

Kishon writes: phy: for 5.1 *) Add a new driver to support Armada 3700 COMPHY IP (supports SATA, USB3, PCIe) *) Add a new driver to support Armada UTMI PHY *) Add a new driver to support Cadence D-PHY *) Extend omap-usb2 PHY driver to be used for AM654 USB2 PHY *) Extend qcom-qmp PHY driver to be used for UFS PHY and USB3 PHY in Qualcomm MSM8998 *) Extend qcom-qusb2 PHY driver to support QUSB2 PHY in Qualcomm MSM8998 *) Remove module specific code that is present for drivers that can be only built-in *) Allow Freescale IMX8MQ USB to be used for multiple SoCs and not just i.MX8MQ *) Cleanups such as switch to SPDX identifier, use readl_poll_timeout macro, remove unused headers etc., Signed-off-by: Kishon Vijay Abraham I * tag 'phy-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (32 commits) phy: qcom-qmp: Add QMP UFS PHY support for msm8998 dt-bindings: phy-qcom-qmp: Add qcom,msm8998-qmp-ufs-phy phy: bcm-sr-pcie: Change operation when PIPEMUX=1 phy: Add Cadence D-PHY support dt-bindings: phy: Move the Cadence D-PHY bindings phy: dphy: Clarify lanes parameter documentation phy: dphy: Change units of wakeup and init parameters phy: dphy: Remove unused header MAINTAINERS: phy: fill Armada 3700 PHY drivers entry dt-bindings: phy: mvebu-utmi: add UTMI PHY bindings phy: add A3700 UTMI PHY driver MAINTAINERS: phy: add entry for Armada 3700 COMPHY driver dt-bindings: phy: mvebu-comphy: extend the file to describe a3700 bindings phy: add A3700 COMPHY support phy: mvebu-cp110-comphy: fix port check in ->xlate() phy: armada375-usb2: switch to SPDX license identifier phy: make phy-armada375-usb2 explicitly non-modular phy: make phy-mvebu-sata explicitly non-modular phy: make phy-core explicitly non-modular phy: qcom-qusb2: Add QUSB2 PHY support for msm8998 ...

phy: qcom-qmp: Add QMP UFS PHY support for msm8998

2019-02-12T07:32:38Z

Use same init sequence as sdm845. Reviewed-by: Jeffrey Hugo Signed-off-by: Marc Gonzalez Signed-off-by: Kishon Vijay Abraham I

phy: armada38x: add common phy support

2019-02-08T02:10:25Z

Add support for the Armada 38x common phy to allow us to change the speed of the Ethernet serdes lane. This driver only supports manipulation of the speed, it does not support configuration of the common phy. Signed-off-by: Russell King Signed-off-by: David S. Miller

phy: Move Allwinner A31 D-PHY driver to drivers/phy/

2019-02-07T08:34:49Z

Now that our MIPI D-PHY driver has been converted to the phy framework, let's move it into the drivers/phy directory. Reviewed-by: Paul Kocialkowski Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/2447609da5b80f148c79b2b2a263a0e779f3e82f.1548085432.git-series.maxime.ripard@bootlin.com

phy: bcm-sr-pcie: Change operation when PIPEMUX=1

2019-02-07T05:41:06Z

When PIPEMIX=1, change the operation from 2x8 EP to 1x8 EP + 1x8 RC. Signed-off-by: Qingmin Liu Signed-off-by: Ray Jui Acked-by: Scott Branden Signed-off-by: Kishon Vijay Abraham I

phy: Add Cadence D-PHY support

2019-02-07T05:41:06Z

Cadence has designed a D-PHY that can be used by the, currently in tree, DSI bridge (DRM), CSI Transceiver and CSI Receiver (v4l2) drivers. Only the DSI driver has an ad-hoc driver for that phy at the moment, while the v4l2 drivers are completely missing any phy support. In order to make that phy support available to all these drivers, without having to duplicate that code three times, let's create a generic phy framework driver. Acked-by: Sakari Ailus Signed-off-by: Maxime Ripard Signed-off-by: Kishon Vijay Abraham I