linux/drivers/phy, branch v5.10

phy: mediatek: fix spelling mistake in Kconfig "veriosn" -> "version"

2020-11-16T07:51:28Z

There is a spelling mistake in the Kconfig. Fix it. Signed-off-by: Colin Ian King Link: https://lore.kernel.org/r/20201114120518.416120-1-colin.king@canonical.com Signed-off-by: Vinod Koul

phy: qualcomm: Fix 28 nm Hi-Speed USB PHY OF dependency

2020-11-16T07:50:38Z

This Kconfig entry should declare a dependency on OF Fixes: 67b27dbeac4d ("phy: qualcomm: Add Synopsys 28nm Hi-Speed USB PHY driver") Signed-off-by: Bryan O'Donoghue Link: https://lore.kernel.org/r/20201113151225.1657600-3-bryan.odonoghue@linaro.org Signed-off-by: Vinod Koul

phy: qualcomm: usb: Fix SuperSpeed PHY OF dependency

2020-11-16T07:50:38Z

This Kconfig entry should declare a dependency on OF Fixes: 6076967a500c ("phy: qualcomm: usb: Add SuperSpeed PHY driver") Reported-by: kernel test robot Link: https://lkml.org/lkml/2020/11/13/414 Signed-off-by: Bryan O'Donoghue Link: https://lore.kernel.org/r/20201113151225.1657600-2-bryan.odonoghue@linaro.org Signed-off-by: Vinod Koul

phy: intel: PHY_INTEL_KEEMBAY_EMMC should depend on ARCH_KEEMBAY

2020-11-16T07:40:17Z

The Intel Keem Bay eMMC PHY is only present on Intel Keem Bay SoCs. Hence add a dependency on ARCH_KEEMBAY, to prevent asking the user about this driver when configuring a kernel without Intel Keem Bay platform support. Fixes: 885c4f4d6cf448f6 ("phy: intel: Add Keem Bay eMMC PHY support") Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20201110144600.3279752-1-geert+renesas@glider.be Signed-off-by: Vinod Koul

phy: cpcap-usb: Use IRQF_ONESHOT

2020-10-28T16:23:48Z

Fixes coccicheck error: ./drivers/phy/motorola/phy-cpcap-usb.c:365:9-34: ERROR: Threaded IRQ with no primary handler requested without IRQF_ONESHOT Reported-by: Hulk Robot Signed-off-by: Zou Wei Link: https://lore.kernel.org/r/1603875549-107500-1-git-send-email-zou_wei@huawei.com Signed-off-by: Vinod Koul

phy: qcom-qmp: Initialize another pointer to NULL

2020-10-28T16:17:50Z

This probe function is too complicated and should be refactored. For now let's just set this variable to NULL and keep the static analysis tools happy. Fixes: 52e013d0bffa ("phy: qcom-qmp: Add support for DP in USB3+DP combo phy") Reported-by: kernel test robot Reported-by: Dan Carpenter Signed-off-by: Stephen Boyd Link: https://lore.kernel.org/r/20201026205942.2861828-1-swboyd@chromium.org Signed-off-by: Vinod Koul

phy: tegra: xusb: Fix dangling pointer on probe failure

2020-10-28T16:12:18Z

If, for some reason, the xusb PHY fails to probe, it leaves a dangling pointer attached to the platform device structure. This would normally be harmless, but the Tegra XHCI driver then goes and extract that pointer from the PHY device. Things go downhill from there: 8.752082] [004d554e5145533c] address between user and kernel address ranges [ 8.752085] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 8.752088] Modules linked in: max77620_regulator(E+) xhci_tegra(E+) sdhci_tegra(E+) xhci_hcd(E) sdhci_pltfm(E) cqhci(E) fixed(E) usbcore(E) scsi_mod(E) sdhci(E) host1x(E+) [ 8.752103] CPU: 4 PID: 158 Comm: systemd-udevd Tainted: G S W E 5.9.0-rc7-00298-gf6337624c4fe #1980 [ 8.752105] Hardware name: NVIDIA Jetson TX2 Developer Kit (DT) [ 8.752108] pstate: 20000005 (nzCv daif -PAN -UAO BTYPE=--) [ 8.752115] pc : kobject_put+0x1c/0x21c [ 8.752120] lr : put_device+0x20/0x30 [ 8.752121] sp : ffffffc012eb3840 [ 8.752122] x29: ffffffc012eb3840 x28: ffffffc010e82638 [ 8.752125] x27: ffffffc008d56440 x26: 0000000000000000 [ 8.752128] x25: ffffff81eb508200 x24: 0000000000000000 [ 8.752130] x23: ffffff81eb538800 x22: 0000000000000000 [ 8.752132] x21: 00000000fffffdfb x20: ffffff81eb538810 [ 8.752134] x19: 3d4d554e51455300 x18: 0000000000000020 [ 8.752136] x17: ffffffc008d00270 x16: ffffffc008d00c94 [ 8.752138] x15: 0000000000000004 x14: ffffff81ebd4ae90 [ 8.752140] x13: 0000000000000000 x12: ffffff81eb86a4e8 [ 8.752142] x11: ffffff81eb86a480 x10: ffffff81eb862fea [ 8.752144] x9 : ffffffc01055fb28 x8 : ffffff81eb86a4a8 [ 8.752146] x7 : 0000000000000001 x6 : 0000000000000001 [ 8.752148] x5 : ffffff81dff8bc38 x4 : 0000000000000000 [ 8.752150] x3 : 0000000000000001 x2 : 0000000000000001 [ 8.752152] x1 : 0000000000000002 x0 : 3d4d554e51455300 [ 8.752155] Call trace: [ 8.752157] kobject_put+0x1c/0x21c [ 8.752160] put_device+0x20/0x30 [ 8.752164] tegra_xusb_padctl_put+0x24/0x3c [ 8.752170] tegra_xusb_probe+0x8b0/0xd10 [xhci_tegra] [ 8.752174] platform_drv_probe+0x60/0xb4 [ 8.752176] really_probe+0xf0/0x504 [ 8.752179] driver_probe_device+0x100/0x170 [ 8.752181] device_driver_attach+0xcc/0xd4 [ 8.752183] __driver_attach+0xb0/0x17c [ 8.752185] bus_for_each_dev+0x7c/0xd4 [ 8.752187] driver_attach+0x30/0x3c [ 8.752189] bus_add_driver+0x154/0x250 [ 8.752191] driver_register+0x84/0x140 [ 8.752193] __platform_driver_register+0x54/0x60 [ 8.752197] tegra_xusb_init+0x40/0x1000 [xhci_tegra] [ 8.752201] do_one_initcall+0x54/0x2d0 [ 8.752205] do_init_module+0x68/0x29c [ 8.752207] load_module+0x2178/0x26c0 [ 8.752209] __do_sys_finit_module+0xb0/0x120 [ 8.752211] __arm64_sys_finit_module+0x2c/0x40 [ 8.752215] el0_svc_common.constprop.0+0x80/0x240 [ 8.752218] do_el0_svc+0x30/0xa0 [ 8.752220] el0_svc+0x18/0x50 [ 8.752223] el0_sync_handler+0x90/0x318 [ 8.752225] el0_sync+0x158/0x180 [ 8.752230] Code: a9bd7bfd 910003fd a90153f3 aa0003f3 (3940f000) [ 8.752232] ---[ end trace 90f6c89d62d85ff5 ]--- Reset the pointer on probe failure fixes the issue. Fixes: 53d2a715c2403 ("phy: Add Tegra XUSB pad controller support") Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20201013095820.311376-1-maz@kernel.org Signed-off-by: Vinod Koul

phy: usb: Fix incorrect clearing of tca_drv_sel bit in SETUP reg for 7211

2020-10-28T16:10:56Z

The 7211a0 has a tca_drv_sel bit in the USB SETUP register that should never be enabled. This feature is only used if there is a USB Type-C PHY, and the 7211 does not have one. If the bit is enabled, the VBUS signal will never be asserted. In the 7211a0, the bit was incorrectly defaulted to on so the driver had to clear the bit. In the 7211c0 the state was inverted so the driver should no longer clear the bit. This hasn't been a problem because all current 7211 boards don't use the VBUS signal, but there are some future customer boards that may use it. Signed-off-by: Al Cooper Acked-by: Florian Fainelli Link: https://lore.kernel.org/r/20201002190115.48017-1-alcooperx@gmail.com Signed-off-by: Vinod Koul

Merge tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2020-10-22T19:41:00Z

Pull PCI updates from Bjorn Helgaas: "Enumeration: - Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong Liu) - Add schedule point in pci_read_config() to reduce max latency (Jiang Biao) - Add Kconfig options for MPS/MRRS strategy (Jim Quinlan) Resource management: - Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo Pieralisi) PCIe native device hotplug: - Reduce noisiness on hot removal (Lukas Wunner) Power management: - Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds" that was done on the basis of spec typo (Bjorn Helgaas) - Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold ambiguity (Krzysztof Wilczyński) - Remove unused pcibios_pm_ops (Vaibhav Gupta) IOMMU: - Enable Translation Blocking for external devices to harden against DMA attacks (Rajat Jain) Error handling: - Add an ACPI APEI notifier chain for vendor CPER records to enable device-specific error handling (Shiju Jose) ASPM: - Remove struct aspm_register_info to simplify code (Saheed O. Bolarinwa) Amlogic Meson PCIe controller driver: - Build as module by default (Kevin Hilman) Ampere Altra PCIe controller driver: - Add MCFG quirk to work around non-standard ECAM implementation (Tuan Phan) Broadcom iProc PCIe controller driver: - Set affinity mask on MSI interrupts (Mark Tomlinson) Broadcom STB PCIe controller driver: - Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan) - Add DT bindings for more Brcmstb chips (Jim Quinlan) - Add bcm7278 register info (Jim Quinlan) - Add bcm7278 PERST# support (Jim Quinlan) - Add suspend and resume pm_ops (Jim Quinlan) - Add control of rescal reset (Jim Quinlan) - Set additional internal memory DMA viewport sizes (Jim Quinlan) - Accommodate MSI for older chips (Jim Quinlan) - Set bus max burst size by chip type (Jim Quinlan) - Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Use dev_err_probe() to reduce redundant messages (Anson Huang) Freescale Layerscape PCIe controller driver: - Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang) - Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint support for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint test support for lS1088a (Xiaowei Bao) - Add MSI-X support for ls1088a (Xiaowei Bao) HiSilicon HIP PCIe controller driver: - Handle HIP-specific errors via ACPI APEI (Yicong Yang) HiSilicon Kirin PCIe controller driver: - Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo) Intel VMD host bridge driver: - Factor out physical offset, bus offset, IRQ domain, IRQ allocation (Jon Derrick) - Use generic PCI PM correctly (Jon Derrick) Marvell Aardvark PCIe controller driver: - Fix compilation on s390 (Pali Rohár) - Implement driver 'remove' function and allow to build it as module (Pali Rohár) - Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár) - Convert mvebu a3700 internal SMCC firmware return codes to errno (Pali Rohár) - Fix initialization with old Marvell's Arm Trusted Firmware (Pali Rohár) Microsoft Hyper-V host bridge driver: - Fix hibernation in case interrupts are not re-created (Dexuan Cui) NVIDIA Tegra PCIe controller driver: - Stop checking return value of debugfs_create() functions (Greg Kroah-Hartman) - Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin) Qualcomm PCIe controller driver: - Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith) Renesas R-Car PCIe controller driver: - Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints (Lad Prabhakar) - Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar) - Add DT support for r8a7742 (Lad Prabhakar) Socionext UniPhier Pro5 controller driver: - Add DT descriptions of iATU register (host and endpoint) (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems unavoidable) (Hou Zhiqiang) - Fix endpoint Header Type check so multi-function devices work (Hou Zhiqiang) - Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang) - Stop leaking MSI page in suspend/resume (Jisheng Zhang) - Add common iATU register support instead of keystone-specific code (Kunihiko Hayashi) - Major config space access and other cleanups in dwc core and drivers that use it (al, exynos, histb, imx6, intel-gw, keystone, kirin, meson, qcom, tegra) (Rob Herring) - Add multiple PFs support for endpoint (Xiaowei Bao) - Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao) Miscellaneous: - Use fallthrough pseudo-keyword (Gustavo A. R. Silva) - Fix "0 used as NULL pointer" warnings (Gustavo Pimentel) - Fix "cast truncates bits from constant value" warnings (Gustavo Pimentel) - Remove redundant zeroing for sg_init_table() (Julia Lawall) - Use scnprintf(), not snprintf(), in sysfs "show" functions (Krzysztof Wilczyński) - Remove unused assignments (Krzysztof Wilczyński) - Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński) - Simplify bool comparisons (Krzysztof Wilczyński) - Use for_each_child_of_node() and for_each_node_by_name() (Qinglang Miao) - Simplify return expressions (Qinglang Miao)" * tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits) PCI: vmd: Update VMD PM to correctly use generic PCI PM PCI: vmd: Create IRQ allocation helper PCI: vmd: Create IRQ Domain configuration helper PCI: vmd: Create bus offset configuration helper PCI: vmd: Create physical offset helper PCI: v3-semi: Remove unneeded break PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus() PCI/ASPM: Remove struct pcie_link_state.l1ss PCI/ASPM: Remove struct aspm_register_info.l1ss_cap PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1 PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused) PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr PCI/ASPM: Remove struct aspm_register_info.latency_encoding PCI/ASPM: Remove struct aspm_register_info.enabled PCI/ASPM: Remove struct aspm_register_info.support PCI/ASPM: Use 'parent' and 'child' for readability PCI/ASPM: Move LTR path check to where it's used PCI/ASPM: Move pci_clear_and_set_dword() earlier PCI: dwc: Fix MSI page leakage in suspend/resume ...

Merge tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm

2020-10-15T17:46:16Z

Pull drm updates from Dave Airlie: "Not a major amount of change, the i915 trees got split into display and gt trees to better facilitate higher level review, and there's a major refactoring of i915 GEM locking to use more core kernel concepts (like ww-mutexes). msm gets per-process pagetables, older AMD SI cards get DC support, nouveau got a bump in displayport support with common code extraction from i915. Outside of drm this contains a couple of patches for hexint moduleparams which you've acked, and a virtio common code tree that you should also get via it's regular path. New driver: - Cadence MHDP8546 DisplayPort bridge driver core: - cross-driver scatterlist cleanups - devm_drm conversions - remove drm_dev_init - devm_drm_dev_alloc conversion ttm: - lots of refactoring and cleanups bridges: - chained bridge support in more drivers panel: - misc new panels scheduler: - cleanup priority levels displayport: - refactor i915 code into helpers for nouveau i915: - split into display and GT trees - WW locking refactoring in GEM - execbuf2 extension mechanism - syncobj timeline support - GEN 12 HOBL display powersaving - Rocket Lake display additions - Disable FBC on Tigerlake - Tigerlake Type-C + DP improvements - Hotplug interrupt refactoring amdgpu: - Sienna Cichlid updates - Navy Flounder updates - DCE6 (SI) support for DC - Plane rotation enabled - TMZ state info ioctl - PCIe DPC recovery support - DC interrupt handling refactor - OLED panel fixes amdkfd: - add SMI events for thermal throttling - SMI interface events ioctl update - process eviction counters radeon: - move to dma_ for allocations - expose sclk via sysfs msm: - DSI support for sm8150/sm8250 - per-process GPU pagetable support - Displayport support mediatek: - move HDMI phy driver to PHY - convert mtk-dpi to bridge API - disable mt2701 tmds tegra: - bridge support exynos: - misc cleanups vc4: - dual display cleanups ast: - cleanups gma500: - conversion to GPIOd API hisilicon: - misc reworks ingenic: - clock handling and format improvements mcde: - DSI support mgag200: - desktop g200 support mxsfb: - i.MX7 + i.MX8M - alpha plane support panfrost: - devfreq support - amlogic SoC support ps8640: - EDID from eDP retrieval tidss: - AM65xx YUV workaround virtio: - virtio-gpu exported resources rcar-du: - R8A7742, R8A774E1 and R8A77961 support - YUV planar format fixes - non-visible plane handling - VSP device reference count fix - Kconfig fix to avoid displaying disabled options in .config" * tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm: (1494 commits) drm/ingenic: Fix bad revert drm/amdgpu: Fix invalid number of character '{' in amdgpu_acpi_init drm/amdgpu: Remove warning for virtual_display drm/amdgpu: kfd_initialized can be static drm/amd/pm: setup APU dpm clock table in SMU HW initialization drm/amdgpu: prevent spurious warning drm/amdgpu/swsmu: fix ARC build errors drm/amd/display: Fix OPTC_DATA_FORMAT programming drm/amd/display: Don't allow pstate if no support in blank drm/panfrost: increase readl_relaxed_poll_timeout values MAINTAINERS: Update entry for st7703 driver after the rename Revert "gpu/drm: ingenic: Add option to mmap GEM buffers cached" drm/amd/display: HDMI remote sink need mode validation for Linux drm/amd/display: Change to correct unit on audio rate drm/amd/display: Avoid set zero in the requested clk drm/amdgpu: align frag_end to covered address space drm/amdgpu: fix NULL pointer dereference for Renoir drm/vmwgfx: fix regression in thp code due to ttm init refactor. drm/amdgpu/swsmu: add interrupt work handler for smu11 parts drm/amdgpu/swsmu: add interrupt work function ...