linux/drivers/phy, branch v5.14

Merge tag 'usb-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2021-07-05T21:16:22Z

Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt patches for 5.14-rc1. Nothing major here just lots of little changes for new hardware and features. Highlights are: - more USB 4 support added to the thunderbolt core - build warning fixes all over the place - usb-serial driver updates and new device support - mtu3 driver updates - gadget driver updates - dwc3 driver updates - dwc2 driver updates - isp1760 host driver updates - musb driver updates - lots of other tiny things. Full details are in the shortlog. All of these have been in linux-next for a while now with no reported issues" * tag 'usb-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (223 commits) phy: qcom-qusb2: Add configuration for SM4250 and SM6115 dt-bindings: phy: qcom,qusb2: document sm4250/6115 compatible dt-bindings: usb: qcom,dwc3: Add bindings for sm6115/4250 USB: cdc-acm: blacklist Heimann USB Appset device usb: xhci-mtk: allow multiple Start-Split in a microframe usb: ftdi-elan: remove redundant continue statement in a while-loop usb: class: cdc-wdm: return the correct errno code xhci: remove redundant continue statement usb: dwc3: Fix debugfs creation flow usb: gadget: hid: fix error return code in hid_bind() usb: gadget: eem: fix echo command packet response issue usb: gadget: f_hid: fix endianness issue with descriptors Revert "USB: misc: Add onboard_usb_hub driver" Revert "of/platform: Add stubs for of_platform_device_create/destroy()" Revert "usb: host: xhci-plat: Create platform device for onboard hubs in probe()" Revert "arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub" xhci: solve a double free problem while doing s4 xhci: handle failed buffer copy to URB sg list and fix a W=1 copiler warning xhci: Add adaptive interrupt rate for isoch TRBs with XHCI_AVOID_BEI quirk xhci: Remove unused defines for ERST_SIZE and ERST_ENTRIES ...

Merge tag 'staging-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

2021-07-05T21:01:53Z

Pull staging / IIO driver updates from Greg KH: "Here is the big set of IIO and staging driver patches for 5.14-rc1. Loads of IIO driver updates and additions in here, the shortlog has the full details. For the staging side, we moved a few drivers out of staging, and deleted the kpc2000 drivers as the original developer asked us to because no one was working on them anymore. Also in here are loads of coding style cleanups due to different intern projects focusing on the staging tree to try to get experience doing kernel development. All of these have been in the linux-next tree for a while with no reported problems" * tag 'staging-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (744 commits) staging: hi6421-spmi-pmic: cleanup some macros staging: hi6421-spmi-pmic: change identation of a table staging: hi6421-spmi-pmic: change a return code staging: hi6421-spmi-pmic: better name IRQs staging: hi6421-spmi-pmic: use devm_request_threaded_irq() staging: hisilicon,hi6421-spmi-pmic.yaml: cleanup descriptions spmi: hisi-spmi-controller: move driver from staging phy: phy-hi3670-usb3: move driver from staging into phy staging: rtl8188eu: remove include/rtw_debug.h header staging: rtl8188eu: remove GlobalDebugLevel variable staging: rtl8188eu: remove DRIVER_PREFIX preprocessor definition staging: rtl8188eu: remove RT_TRACE macro staging: rtl8188eu: remove all RT_TRACE calls from hal/rtl8188eu_recv.c staging: rtl8188eu: remove all RT_TRACE calls from hal/hal_intf.c staging: rtl8188eu: remove all RT_TRACE calls from hal/rtl8188eu_xmit.c staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_xmit.c staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_pwrctrl.c staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_recv.c staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_ioctl_set.c staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_ieee80211.c ...

Merge tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2021-07-05T20:42:16Z

Pull char / misc driver updates from Greg KH: "Here is the big set of char / misc and other driver subsystem updates for 5.14-rc1. Included in here are: - habanalabs driver updates - fsl-mc driver updates - comedi driver updates - fpga driver updates - extcon driver updates - interconnect driver updates - mei driver updates - nvmem driver updates - phy driver updates - pnp driver updates - soundwire driver updates - lots of other tiny driver updates for char and misc drivers This is looking more and more like the "various driver subsystems mushed together" tree... All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits) mcb: Use DEFINE_RES_MEM() helper macro and fix the end address PNP: moved EXPORT_SYMBOL so that it immediately followed its function/variable bus: mhi: pci-generic: Add missing 'pci_disable_pcie_error_reporting()' calls bus: mhi: Wait for M2 state during system resume bus: mhi: core: Fix power down latency intel_th: Wait until port is in reset before programming it intel_th: msu: Make contiguous buffers uncached intel_th: Remove an unused exit point from intel_th_remove() stm class: Spelling fix nitro_enclaves: Set Bus Master for the NE PCI device misc: ibmasm: Modify matricies to matrices misc: vmw_vmci: return the correct errno code siox: Simplify error handling via dev_err_probe() fpga: machxo2-spi: Address warning about unused variable lkdtm/heap: Add init_on_alloc tests selftests/lkdtm: Enable various testable CONFIGs lkdtm: Add CONFIG hints in errors where possible lkdtm: Enable DOUBLE_FAULT on all architectures lkdtm/heap: Add vmalloc linear overflow test lkdtm/bugs: XFAIL UNALIGNED_LOAD_STORE_WRITE ...

phy: intel: Fix for warnings due to EMMC clock 175Mhz change in FIP

2021-06-29T14:45:16Z

Since the EMMC clock was changed from 200Mhz to 175Mhz in FIP, there were some warnings introduced, as the frequency values being checked was still wrt 200Mhz in code. Hence, the frequency checks are now updated based on the current 175Mhz EMMC clock changed in FIP. Spamming kernel log msg: "phy phy-20290000.mmc_phy.2: Unsupported rate: 43750000" Signed-off-by: Rashmi A Reviewed-by: Adrian Hunter Acked-By: Vinod Koul Link: https://lore.kernel.org/r/20210603182242.25733-3-rashmi.a@intel.com Signed-off-by: Ulf Hansson

phy: phy-hi3670-usb3: move driver from staging into phy

2021-06-25T08:02:02Z

The phy USB3 driver for Hisilicon 970 (hi3670) is ready for mainstream. Mode it from staging into the main driver's phy/ directory. Acked-by: Rob Herring Acked-By: Vinod Koul Signed-off-by: Mauro Carvalho Chehab Link: https://lore.kernel.org/r/dcf66a01aaeaab93cda52f9a283ecbdf9fa71bb8.1624606660.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman

phy: qcom-qusb2: Add configuration for SM4250 and SM6115

2021-06-24T12:31:56Z

The SM4250 and SM6115 uses the same register layout as MSM8996, but the tune sequence is a bit different. Reviewed-by: Bjorn Andersson Signed-off-by: Iskren Chernev Link: https://lore.kernel.org/r/20210622203240.559979-4-iskren.chernev@gmail.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'phy-for-5.14_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next

2021-06-23T08:33:34Z

Vinod writes: phy-for-5.14 version 2 - Updates: - Yaml conversion for renesas,rcar-gen3 pcie phy and rockchip-usb-phy bindings - Support for devm_phy_get() taking NULL phy name - New support: - PCIe phy for Qualcomm IPQ60xx - PCIe phy for Qualcomm SDX55 - USB phy for RK3308 - CAN transceivers phy for TI TCAN104x - Innosilicon-based CSI dphy for rockchip * tag 'phy-for-5.14_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (36 commits) phy: Revert "phy: ralink: Kconfig: convert mt7621-pci-phy into 'bool'" phy: ti: dm816x: Fix the error handling path in 'dm816x_usb_phy_probe() phy: uniphier-pcie: Fix updating phy parameters phy/rockchip: add Innosilicon-based CSI dphy dt-bindings: phy: add yaml binding for rockchip-inno-csi-dphy phy: rockchip: remove redundant initialization of pointer cfg phy: phy-can-transceiver: Add support for generic CAN transceiver driver dt-bindings: phy: Add binding for TI TCAN104x CAN transceivers phy: core: Reword the comment specifying the units of max_link_rate to be Mbps phy: phy-mtk-hdmi: Remove redundant dev_err call in mtk_hdmi_phy_probe() phy: phy-mtk-mipi-dsi: Remove redundant dev_err call in mtk_mipi_tx_probe() phy: phy-mmp3-hsic: Remove redundant dev_err call in mmp3_hsic_phy_probe() phy: bcm-ns-usb3: Remove redundant dev_err call in bcm_ns_usb3_mdio_probe() MAINTAINERS: update marvell,armada-3700-utmi-phy.yaml reference phy: phy-twl4030-usb: use DEVICE_ATTR_RO macro dt-bindings: phy: convert rockchip-usb-phy.txt to YAML phy: phy-rockchip-inno-usb2: add support for RK3308 USB phy dt-bindings: phy: rockchip-inno-usb2: add compatible for rk3308 USB phy phy: stm32: manage optional vbus regulator on phy_power_on/off dt-bindings: phy: add vbus-supply optional property to phy-stm32-usbphyc ...

phy: Revert "phy: ralink: Kconfig: convert mt7621-pci-phy into 'bool'"

2021-06-23T07:29:46Z

This reverts commit 6eded551cefe ("phy: ralink: Kconfig: convert mt7621-pci-phy into 'bool'") as we don't want drivers to be built in and should be a module instead Signed-off-by: Vinod Koul

phy: ti: dm816x: Fix the error handling path in 'dm816x_usb_phy_probe()

2021-06-21T06:34:18Z

Add an error handling path in the probe to release some resources, as already done in the remove function. Fixes: 609adde838f4 ("phy: Add a driver for dm816x USB PHY") Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/ac5136881f6bdec50be19b3bf73b3bc1b15ef1f1.1622898974.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul

phy: uniphier-pcie: Fix updating phy parameters

2021-06-21T06:33:05Z

The current driver uses a value from register TEST_O as the original value for register TEST_I, though, the value is overwritten by "param", so there is a bug that the original value isn't no longer used. The value of TEST_O[7:0] should be masked with "mask", replaced with "param", and placed in the bitfield TESTI_DAT_MASK as new TEST_I value. Fixes: c6d9b1324159 ("phy: socionext: add PCIe PHY driver support") Signed-off-by: Kunihiko Hayashi Link: https://lore.kernel.org/r/1623037842-19363-1-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Vinod Koul