linux/drivers/phy, branch v6.14

phy: tegra: xusb: reset VBUS & ID OVERRIDE

2025-02-14T12:33:05Z

Observed VBUS_OVERRIDE & ID_OVERRIDE might be programmed with unexpected value prior to XUSB PADCTL driver, this could also occur in virtualization scenario. For example, UEFI firmware programs ID_OVERRIDE=GROUNDED to set a type-c port to host mode and keeps the value to kernel. If the type-c port is connected a usb host, below errors can be observed right after usb host mode driver gets probed. The errors would keep until usb role class driver detects the type-c port as device mode and notifies usb device mode driver to set both ID_OVERRIDE and VBUS_OVERRIDE to correct value by XUSB PADCTL driver. [ 173.765814] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 173.765837] usb usb3-port2: config error Taking virtualization into account, asserting XUSB PADCTL reset would break XUSB functions used by other guest OS, hence only reset VBUS & ID OVERRIDE of the port in utmi_phy_init. Fixes: bbf711682cd5 ("phy: tegra: xusb: Add Tegra186 support") Cc: stable@vger.kernel.org Change-Id: Ic63058d4d49b4a1f8f9ab313196e20ad131cc591 Signed-off-by: BH Hsieh Signed-off-by: Henry Lin Link: https://lore.kernel.org/r/20250122105943.8057-1-henryl@nvidia.com Signed-off-by: Vinod Koul

phy: ti: gmii-sel: Do not use syscon helper to build regmap

2025-02-14T12:30:01Z

The syscon helper device_node_to_regmap() is used to fetch a regmap registered to a device node. It also currently creates this regmap if the node did not already have a regmap associated with it. This should only be used on "syscon" nodes. This driver is not such a device and instead uses device_node_to_regmap() on its own node as a hacky way to create a regmap for itself. This will not work going forward and so we should create our regmap the normal way by defining our regmap_config, fetching our memory resource, then using the normal regmap_init_mmio() function. Signed-off-by: Andrew Davis Tested-by: Nishanth Menon Link: https://lore.kernel.org/r/20250123182234.597665-1-afd@ti.com Signed-off-by: Vinod Koul

phy: exynos5-usbdrd: gs101: ensure power is gated to SS phy in phy_exit()

2025-02-14T12:28:21Z

We currently don't gate the power to the SS phy in phy_exit(). Shuffle the code slightly to ensure the power is gated to the SS phy as well. Fixes: 32267c29bc7d ("phy: exynos5-usbdrd: support Exynos USBDRD 3.1 combo phy (HS & SS)") CC: stable@vger.kernel.org # 6.11+ Reviewed-by: Krzysztof Kozlowski Reviewed-by: Peter Griffin Signed-off-by: André Draszik Link: https://lore.kernel.org/r/20241205-gs101-usb-phy-fix-v4-1-0278809fb810@linaro.org Signed-off-by: Vinod Koul

phy: freescale: fsl-samsung-hdmi: Limit PLL lock detection clock divider to valid range

2025-02-13T17:30:45Z

FIELD_PREP() checks that a value fits into the available bitfield, but the index div equals to 4,is out of range. which gcc complains about: In function ‘fsl_samsung_hdmi_phy_configure_pll_lock_det’, inlined from ‘fsl_samsung_hdmi_phy_configure’ at drivers/phy/freescale/phy-fsl-samsung-hdmi.c :470:2: ././include/linux/compiler_types.h:542:38: error: call to ‘__compiletime_assert_538’ declared with attribute error: FIELD_PREP: value too large for the field 542 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) | ^ ././include/linux/compiler_types.h:523:4: note: in definition of macro ‘__compiletime_assert’ 523 | prefix ## suffix(); | ^~~~~~ ././include/linux/compiler_types.h:542:2: note: in expansion of macro ‘_compiletime_assert’ 542 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) REG12_CK_DIV_MASK only two bit, limit div to range 0~3, so build error will fix. Fixes: d567679f2b6a ("phy: freescale: fsl-samsung-hdmi: Clean up fld_tg_code calculation") Signed-off-by: Pei Xiao Changlog: Reviewed-by: Adam Ford Link: https://lore.kernel.org/r/tencent_6F503D43467AA99DD8CC59B8F645F0725B0A@qq.com Signed-off-by: Vinod Koul

phy: exynos5-usbdrd: fix MPLL_MULTIPLIER and SSC_REFCLKSEL masks in refclk

2025-02-10T16:57:15Z

In exynos5_usbdrd_{pipe3,utmi}_set_refclk(), the masks PHYCLKRST_MPLL_MULTIPLIER_MASK and PHYCLKRST_SSC_REFCLKSEL_MASK are not inverted when applied to the register values. Fix it. Cc: stable@vger.kernel.org Fixes: 59025887fb08 ("phy: Add new Exynos5 USB 3.0 PHY driver") Signed-off-by: Kaustabh Chakraborty Reviewed-by: Krzysztof Kozlowski Reviewed-by: Anand Moon Link: https://lore.kernel.org/r/20250209-exynos5-usbdrd-masks-v1-1-4f7f83f323d7@disroot.org Signed-off-by: Vinod Koul

phy: stm32: Fix constant-value overflow assertion

2025-02-10T16:56:07Z

Rework the workaround as the lookup tables always fits into the bitfield, and the default values are defined by the hardware and cannot be 0: Guard against false positive with a WARN_ON check to make the compiler happy: The offset range is pre-checked against the sorted imp_lookup_table values and overflow should not happen and would be caught by a warning and return in error. Also guard against a true positive found during the max_vswing lookup, as a max vswing value can be 802000 or 803000 microvolt depending on the current impedance. Therefore set the default impedence index. Fixes: 2de679ecd724 ("phy: stm32: work around constant-value overflow assertion") Signed-off-by: Christian Bruel Link: https://lore.kernel.org/r/20250210103515.2598377-1-christian.bruel@foss.st.com Signed-off-by: Vinod Koul

phy: rockchip: naneng-combphy: compatible reset with old DT

2025-02-04T05:12:37Z

The device tree of RK3568 did not specify reset-names before. So add fallback to old behaviour to be compatible with old DT. Fixes: fbcbffbac994 ("phy: rockchip: naneng-combphy: fix phy reset") Cc: Jianfeng Liu Signed-off-by: Chukun Pan Reviewed-by: Jonas Karlman Link: https://lore.kernel.org/r/20250106100001.1344418-2-amadeus@jmu.edu.cn Signed-off-by: Vinod Koul

phy: rockchip: fix Kconfig dependency more

2025-02-04T05:12:37Z

A previous patch ensured that USB Type C connector support is enabled, but it is still possible to build the phy driver without enabling CONFIG_USB (host support) or CONFIG_USB_GADGET (device support), and in that case the common helper functions are unavailable: aarch64-linux-ld: drivers/phy/rockchip/phy-rockchip-usbdp.o: in function `rk_udphy_probe': phy-rockchip-usbdp.c:(.text+0xe74): undefined reference to `usb_get_maximum_speed' Select CONFIG_USB_COMMON directly here, like we do in some other phy drivers, to make sure this is available even when actual USB support is disabled or in a loadable module that cannot be reached from a built-in phy driver. Fixes: 9c79b779643e ("phy: rockchip: fix CONFIG_TYPEC dependency") Signed-off-by: Arnd Bergmann Reviewed-by: Sebastian Reichel Reviewed-by: Heiko Stuebner Link: https://lore.kernel.org/r/20250122065249.1390081-1-arnd@kernel.org Signed-off-by: Vinod Koul

Merge tag 'phy-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy

2025-01-29T22:32:38Z

Pull phy updates from Vinod Koul: "Lots of Qualcomm and Rockchip device support. New Support: - Qualcomm SAR2130P qmp usb, SAR2130P qmp pcie, QCS615 qusb2 and PCIe, IPQ5424 qmp pcie, IPQ5424 QUSB2 and USB3 PHY - Rockchip rk3576 combo phy support Updates: - Drop Shengyang for JH7110 maintainer - Freescale hdmi register calculation optimization - Rockchip pcie phy mutex and regmap updates" * tag 'phy-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (37 commits) dt-bindings: phy: qcom,qmp-pcie: document the SM8350 two lanes PCIe PHY phy: rockchip: phy-rockchip-typec: Fix Copyright description dt-bindings: phy: qcom,ipq8074-qmp-pcie: Document the IPQ5424 QMP PCIe PHYs phy: qcom-qusb2: Add support for QCS615 dt-bindings: usb: qcom,dwc3: Add QCS615 to USB DWC3 bindings phy: core: Simplify API of_phy_simple_xlate() implementation phy: sun4i-usb: Remove unused of_gpio.h phy: HiSilicon: Don't use "proxy" headers phy: samsung-ufs: switch back to syscon_regmap_lookup_by_phandle() phy: qualcomm: qmp-pcie: add support for SAR2130P phy: qualcomm: qmp-pcie: define several new registers phy: qualcomm: qmp-pcie: split PCS_LANE1 region phy: qualcomm: qmp-combo: add support for SAR2130P dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Add SAR2130P compatible dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Add SAR2130P compatible phy: freescale: fsl-samsung-hdmi: Clean up fld_tg_code calculation phy: freescale: fsl-samsung-hdmi: Stop searching when exact match is found phy: freescale: fsl-samsung-hdmi: Expand Integer divider range phy: rockchip-naneng-combo: add rk3576 support dt-bindings: phy: rockchip: add rk3576 compatible ...

mediatek: stop messing with ->d_iname

2025-01-15T12:14:36Z

use debgufs_{create_file,get}_aux_num() instead. Signed-off-by: Al Viro Link: https://lore.kernel.org/r/20250112080705.141166-11-viro@zeniv.linux.org.uk Signed-off-by: Greg Kroah-Hartman