linux/drivers/phy, branch v6.17

phy: qcom: qmp-pcie: Fix PHY initialization when powered down by firmware

2025-09-01T16:59:20Z

Commit 0cc22f5a861c ("phy: qcom: qmp-pcie: Add PHY register retention support") added support for using the "no_csr" reset to skip configuration of the PHY if the init sequence was already applied by the boot firmware. The expectation is that the PHY is only turned on/off by using the "no_csr" reset, instead of powering it down and re-programming it after a full reset. The boot firmware on X1E does not fully conform to this expectation: If the PCIe3 link fails to come up (e.g. because no PCIe card is inserted), the firmware powers down the PHY using the QPHY_PCS_POWER_DOWN_CONTROL register. The QPHY_START_CTRL register is kept as-is, so the driver assumes the PHY is already initialized and skips the configuration/power up sequence. The PHY won't come up again without clearing the QPHY_PCS_POWER_DOWN_CONTROL, so eventually initialization fails: qcom-qmp-pcie-phy 1be0000.phy: phy initialization timed-out phy phy-1be0000.phy.0: phy poweron failed --> -110 qcom-pcie 1bd0000.pcie: cannot initialize host qcom-pcie 1bd0000.pcie: probe with driver qcom-pcie failed with error -110 This can be reliably reproduced on the X1E CRD, QCP and Devkit when no card is inserted for PCIe3. Fix this by checking the QPHY_PCS_POWER_DOWN_CONTROL register in addition to QPHY_START_CTRL. If the PHY is powered down with the register, it doesn't conform to the expectations for using the "no_csr" reset, so we fully re-initialize with the normal reset sequence. Also check the register more carefully to ensure all of the bits we expect are actually set. A simple !!(readl()) is not enough, because the PHY might be only partially set up with some of the expected bits set. Cc: stable@vger.kernel.org Fixes: 0cc22f5a861c ("phy: qcom: qmp-pcie: Add PHY register retention support") Signed-off-by: Stephan Gerhold Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20250821-phy-qcom-qmp-pcie-nocsr-fix-v3-1-4898db0cc07c@linaro.org Signed-off-by: Vinod Koul

phy: ti: gmii-sel: Always write the RGMII ID setting

2025-09-01T16:30:58Z

Some SoCs are just validated with the TX delay enabled. With commit ca13b249f291 ("net: ethernet: ti: am65-cpsw: fixup PHY mode for fixed RGMII TX delay"), the network driver will patch the delay setting on the fly assuming that the TX delay setting is fixed. In reality, the TX delay is configurable and just skipped in the documentation. There are bootloaders, which will disable the TX delay and this will lead to a transmit path which doesn't add any delays at all. Fix that by always writing the RGMII_ID setting and report an error for unsupported RGMII delay modes. This is safe to do and shouldn't break any boards in mainline because the fixed delay is only introduced for gmii-sel compatibles which are used together with the am65-cpsw-nuss driver and also contains the commit above. Fixes: ca13b249f291 ("net: ethernet: ti: am65-cpsw: fixup PHY mode for fixed RGMII TX delay") Signed-off-by: Michael Walle Reviewed-by: Maxime Chevallier Link: https://lore.kernel.org/r/20250819065622.1019537-1-mwalle@kernel.org Signed-off-by: Vinod Koul

phy: ti-pipe3: fix device leak at unbind

2025-08-12T16:00:00Z

Make sure to drop the reference to the control device taken by of_find_device_by_node() during probe when the driver is unbound. Fixes: 918ee0d21ba4 ("usb: phy: omap-usb3: Don't use omap_get_control_dev()") Cc: stable@vger.kernel.org # 3.13 Cc: Roger Quadros Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20250724131206.2211-4-johan@kernel.org Signed-off-by: Vinod Koul

phy: ti: omap-usb2: fix device leak at unbind

2025-08-12T16:00:00Z

Make sure to drop the reference to the control device taken by of_find_device_by_node() during probe when the driver is unbound. Fixes: 478b6c7436c2 ("usb: phy: omap-usb2: Don't use omap_get_control_dev()") Cc: stable@vger.kernel.org # 3.13 Cc: Roger Quadros Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20250724131206.2211-3-johan@kernel.org Signed-off-by: Vinod Koul

phy: tegra: xusb: fix device and OF node leak at probe

2025-08-12T16:00:00Z

Make sure to drop the references taken to the PMC OF node and device by of_parse_phandle() and of_find_device_by_node() during probe. Note the holding a reference to the PMC device does not prevent the PMC regmap from going away (e.g. if the PMC driver is unbound) so there is no need to keep the reference. Fixes: 2d1021487273 ("phy: tegra: xusb: Add wake/sleepwalk for Tegra210") Cc: stable@vger.kernel.org # 5.14 Cc: JC Kuo Signed-off-by: Johan Hovold Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20250724131206.2211-2-johan@kernel.org Signed-off-by: Vinod Koul

phy: qualcomm: phy-qcom-eusb2-repeater: fix override properties

2025-08-12T10:34:51Z

property "qcom,tune-usb2-preem" is for EUSB2_TUNE_USB2_PREEM property "qcom,tune-usb2-amplitude" is for EUSB2_TUNE_IUSB2 The downstream correspondence is as follows: EUSB2_TUNE_USB2_PREEM: Tx pre-emphasis tuning EUSB2_TUNE_IUSB2: HS trasmit amplitude EUSB2_TUNE_SQUELCH_U: Squelch detection threshold EUSB2_TUNE_HSDISC: HS disconnect threshold EUSB2_TUNE_EUSB_SLEW: slew rate Fixes: 31bc94de7602 ("phy: qualcomm: phy-qcom-eusb2-repeater: Don't zero-out registers") Signed-off-by: Pengyu Luo Reviewed-by: Konrad Dybcio Reviewed-by: Luca Weiss Link: https://lore.kernel.org/r/20250812093957.32235-1-mitltlatltl@gmail.com Signed-off-by: Vinod Koul

Merge tag 'phy-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy

2025-08-01T19:31:50Z

Pull phy updates from Vinod Koul: "New Support: - Qualcomm Milos Synopsys eUSB2 PHY, SM8750 QMP phy support, M31 eUSB2 PHY driver - Samsung Exynos990 usbdrd phy, Exynos7870 MIPI phy support - Renesas RZ/V2N usb2-phy support Updates: - Bulk Yaml binding conversion By Rob H (too many to be listed) - cadence: Sierra PCIe, USB PHY multilink configuration support - Qualcomm refactoring of UFS PHY reset and UFS driver support for phy calibrate API" * tag 'phy-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (74 commits) phy: qcom: phy-qcom-m31: Update IPQ5332 M31 USB phy initialization sequence dt-bindings: phy: Convert brcm,sr-usb-combo-phy to DT schema dt-bindings: phy: Convert ti,da830-usb-phy to DT schema dt-bindings: phy: marvell,mmp2-usb-phy: Drop status from the example dt-bindings: phy: mixel, mipi-dsi-phy: Allow assigned-clock* properties phy: exynos-mipi-video: correct cam0 sysreg property name for exynos7870 phy: qcom: phy-qcom-snps-eusb2: Update init sequence per HPG 1.0.2 phy: qcom: phy-qcom-snps-eusb2: Add missing write from init sequence dt-bindings: phy: qcom,snps-eusb2: document the Milos Synopsys eUSB2 PHY dt-bindings: usb: qcom,snps-dwc3: Add Milos compatible phy: rockchip-pcie: Properly disable TEST_WRITE strobe signal phy: rockchip-pcie: Enable all four lanes if required dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings for QCS615 phy: qcom: qmp-combo: Add missing PLL (VCO) configuration on SM8750 phy: qcom: m31-eusb2: drop registration printk phy: qcom: m31-eusb2: fix match data santity check phy: qcom: qmp-pcie: Update PHY settings for QCS8300 & SA8775P phy: qualcomm: phy-qcom-eusb2-repeater: Don't zero-out registers dt-bindings: phy: qcom,snps-eusb2-repeater: Remove default tuning values phy: mediatek: tphy: Cleanup and document slew calibration ...

Merge tag 'for-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

2025-08-01T04:39:01Z

Pull power supply and reset updates from Sebastian Reichel: "Power-supply core: - battery-info: replace any DT specific bits with fwnode usage - replace any device-tree code with generic fwnode based handling Power-supply drivers: - ug3105_battery: use battery-info API - qcom_battmgr: report capacity - qcom_battmgr: support LiPo battery reporting - add missing missing power-supply ref to a bunch of DT bindings - update drivers regarding pm_runtime_autosuspend() usage - misc minor fixes and cleanups Reset drivers: - misc minor cleanups" * tag 'for-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (32 commits) power: supply: core: fix static checker warning power: supply: twl4030_charger: Remove redundant pm_runtime_mark_last_busy() calls power: supply: bq24190: Remove redundant pm_runtime_mark_last_busy() calls MAINTAINERS: rectify file entry in QUALCOMM SMB CHARGER DRIVER power: supply: max1720x correct capacity computation MAINTAINERS: add myself as smbx charger driver maintainer power: supply: pmi8998_charger: rename to qcom_smbx power: supply: qcom_pmi8998_charger: fix wakeirq power: supply: max14577: Handle NULL pdata when CONFIG_OF is not set power: return the correct error code power: reset: POWER_RESET_TORADEX_EC should depend on ARCH_MXC power: supply: cpcap-charger: Fix null check for power_supply_get_by_name power: supply: bq25980_charger: Constify reg_default array power: supply: bq256xx_charger: Constify reg_default array power: reset: at91-sama5d2_shdwc: Refactor wake-up source logging to use dev_info power: reset: qcom-pon: Rename variables to use generic naming power: supply: qcom_battmgr: Add lithium-polymer entry power: supply: qcom_battmgr: Report battery capacity power: supply: bq24190: Free battery_info power: supply: ug3105_battery: Switch to power_supply_batinfo_ocv2cap() ...

phy: qcom: phy-qcom-m31: Update IPQ5332 M31 USB phy initialization sequence

2025-07-22T13:30:06Z

The current configuration used for the IPQ5332 M31 USB PHY fails the Near End High Speed Signal Quality compliance test. To resolve this, update the initialization sequence as specified in the Hardware Design Document. Fixes: 08e49af50701 ("phy: qcom: Introduce M31 USB PHY driver") Cc: stable@kernel.org Signed-off-by: Kathiravan Thirumoorthy Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20250630-ipq5332_hsphy_complaince-v2-1-63621439ebdb@oss.qualcomm.com Signed-off-by: Vinod Koul

phy: exynos-mipi-video: correct cam0 sysreg property name for exynos7870

2025-07-22T13:14:51Z

Fix the cam0 sysreg property name (samsung,cam0-sysreg), which has been erroneously declared as samsung,cam-sysreg. This follows the same name used in Exynos5433 PHY. Fixes: 543f5e314282 ("phy: exynos-mipi-video: introduce support for exynos7870") Reviewed-by: Krzysztof Kozlowski Signed-off-by: Kaustabh Chakraborty Link: https://lore.kernel.org/r/20250710-exynos7870-mipi-phy-fix-v2-1-5cf50d69c9d7@disroot.org Signed-off-by: Vinod Koul