linux/drivers/phy, branch v6.3

Merge tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2023-02-27T18:04:49Z

Pull ARM SoC driver updates from Arnd Bergmann: "As usual, there are lots of minor driver changes across SoC platforms from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung. These usually add support for additional chip variations in existing drivers, but also add features or bugfixes. The SCMI firmware subsystem gains a unified raw userspace interface through debugfs, which can be used for validation purposes. Newly added drivers include: - New power management drivers for StarFive JH7110, Allwinner D1 and Renesas RZ/V2M - A driver for Qualcomm battery and power supply status - A SoC device driver for identifying Nuvoton WPCM450 chips - A regulator coupler driver for Mediatek MT81xxv" * tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) power: supply: Introduce Qualcomm PMIC GLINK power supply soc: apple: rtkit: Do not copy the reg state structure to the stack soc: sunxi: SUN20I_PPU should depend on PM memory: renesas-rpc-if: Remove redundant division of dummy soc: qcom: socinfo: Add IDs for IPQ5332 and its variant dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1 firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/ MAINTAINERS: Update qcom CPR maintainer entry dt-bindings: firmware: document Qualcomm SM8550 SCM dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants soc: qcom: socinfo: Add support for new field in revision 17 soc: qcom: smd-rpm: Add IPQ9574 compatible soc: qcom: pmic_glink: remove redundant calculation of svid soc: qcom: stats: Populate all subsystem debugfs files dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies soc: qcom: pmic_glink: Introduce altmode support ...

phy: qcom: phy-qcom-snps-eusb2: Add support for eUSB2 repeater

2023-02-16T13:10:27Z

For USB 2.0 compliance, eUSB2 needs a repeater. The PHY needs to initialize and reset it. So add repeater support Co-developed-by: Abel Vesa Signed-off-by: Abel Vesa Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20230208190200.2966723-6-abel.vesa@linaro.org Signed-off-by: Vinod Koul

phy: qcom: Add QCOM SNPS eUSB2 repeater driver

2023-02-16T13:10:27Z

PM8550B contains a eUSB2 repeater used for making the eUSB2 from SM8550 USB 2.0 compliant. This can be modelled SW-wise as a Phy. So add a new phy driver for it. Signed-off-by: Abel Vesa Link: https://lore.kernel.org/r/20230208190200.2966723-5-abel.vesa@linaro.org Signed-off-by: Vinod Koul

phy: rockchip-typec: Fix unsigned comparison with less than zero

2023-02-16T13:05:25Z

The dp and ufp are defined as bool type, the return value type of function extcon_get_state should be int, so the type of dp and ufp are modified to int. ./drivers/phy/rockchip/phy-rockchip-typec.c:827:12-14: WARNING: Unsigned expression compared with zero: dp > 0. Reported-by: Abaci Robot Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3962 Signed-off-by: Jiapeng Chong Link: https://lore.kernel.org/r/20230213035709.99027-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Vinod Koul

Merge tag 'phy-fixes-6.2' into next

2023-02-14T13:55:45Z

Merge fixes tag pulled into mainline by Linus into phy/next due to dependency on amlogic patches

phy: rockchip-typec: fix tcphy_get_mode error case

2023-02-14T13:55:28Z

The existing logic in tcphy_get_mode() can cause the phy to be incorrectly configured to USB UFP or DisplayPort mode when extcon_get_state returns an error code. extcon_get_state() can return 0, 1, or a negative error code. It is possible to get into the failing state with an extcon driver which does not support the extcon connector id specified as the second argument to extcon_get_state(). tcphy_get_mode() ->extcon_get_state() -->find_cable_index_by_id() --->return -EINVAL; Fixes: e96be45cb84e ("phy: Add USB Type-C PHY driver for rk3399") Signed-off-by: Neill Kapron Reviewed-by: Lee Jones Link: https://lore.kernel.org/r/20230126001013.3707873-1-nkapron@google.com Signed-off-by: Vinod Koul

phy: qcom: snps-eusb2: Add missing headers

2023-02-13T16:18:18Z

The driver was missing to include couple of headers explictly which causes build to fail on other archs drivers/phy/qualcomm/phy-qcom-snps-eusb2.c: In function 'qcom_snps_eusb2_hsphy_write_mask': drivers/phy/qualcomm/phy-qcom-snps-eusb2.c:147:15: error: implicit declaration of function 'readl_relaxed' [-Werror=implicit-function-declaration] 147 | reg = readl_relaxed(base + offset); | ^~~~~~~~~~~~~ drivers/phy/qualcomm/phy-qcom-snps-eusb2.c:150:9: error: implicit declaration of function 'writel_relaxed' [-Werror=implicit-function-declaration] 150 | writel_relaxed(reg, base + offset); | ^~~~~~~~~~~~~~ drivers/phy/qualcomm/phy-qcom-snps-eusb2.c: In function 'qcom_eusb2_default_parameters': drivers/phy/qualcomm/phy-qcom-snps-eusb2.c:161:42: error: implicit declaration of function 'FIELD_PREP' [-Werror=implicit-function-declaration] 161 | FIELD_PREP(PHY_CFG_TX_PREEMP_TUNE_MASK, 0)); | ^~~~~~~~~~ Fix this by adding bitfield.h and iopoll.h explictly Fixes: 80090810f5d3 ("phy: qcom: Add QCOM SNPS eUSB2 driver") Reported-by: Stephen Rothwell Reported-by: kernel test robot Signed-off-by: Vinod Koul

phy: qcom-qmp-combo: Add support for SM8550

2023-02-10T17:03:44Z

Add SM8550 specific register layout and table configs. Signed-off-by: Abel Vesa Reviewed-by: Johan Hovold Link: https://lore.kernel.org/r/20230208183421.2874423-7-abel.vesa@linaro.org Signed-off-by: Vinod Koul

phy: qcom-qmp: Add v6 DP register offsets

2023-02-10T17:02:43Z

The new SM8550 SoC bumps up the HW version of QMP phy to v6. Add the new DP specific offsets in the generic qmp header file. Signed-off-by: Abel Vesa Link: https://lore.kernel.org/r/20230208183421.2874423-6-abel.vesa@linaro.org Signed-off-by: Vinod Koul

phy: qcom-qmp: pcs-usb: Add v6 register offsets

2023-02-10T17:02:43Z

The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB. Add the new PCS USB specific offsets in a dedicated header file. Signed-off-by: Abel Vesa Link: https://lore.kernel.org/r/20230208183421.2874423-5-abel.vesa@linaro.org Signed-off-by: Vinod Koul