linux/drivers/pinctrl/qcom, branch v4.4

pinctrl: fix qcom ssbi drivers for 64-bit compilation

2015-11-17T14:34:06Z

When building pinctrl-ssbi-gpio and pinctrl-ssbi-mpp for ARM64, we get a compile warning about invalid types: drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c: In function 'pm8xxx_gpio_probe': drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c:675:17: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] drivers/pinctrl/qcom/pinctrl-ssbi-mpp.c: In function 'pm8xxx_mpp_probe': drivers/pinctrl/qcom/pinctrl-ssbi-mpp.c:766:17: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] This changes the code so we cast the pointer to 'unsigned long', which is the right thing to do here. Signed-off-by: Arnd Bergmann Reviewed-by: Bjorn Andersson Signed-off-by: Linus Walleij

Merge tag 'gpio-v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

2015-11-02T20:59:12Z

Pull GPIO updates from Linus Walleij: "Here is the bulk of GPIO changes for the v4.4 development cycle. The only changes hitting outside drivers/gpio are in the pin control subsystem and these seem to have settled nicely in linux-next. Development mistakes and catfights are nicely documented in the reverts as you can see. The outcome of the ABI fight is that we're working on a chardev ABI for GPIO now, where hope to show results for the v4.5 kernel. Summary of changes: GPIO core: - Define and handle flags for open drain/open collector and open source/open emitter, also know as "single-ended" configurations. - Generic request/free operations that handle calling out to the (optional) pin control backend. - Some refactoring related to an ABI change that did not happen, yet provide useful. - Added a real-time compliance checklist. Many GPIO chips have irqchips, and need to think this over with the RT patches going upstream. - Restructure, fix and clean up Kconfig menus a bit. New drivers: - New driver for AMD Promony. - New driver for ACCES 104-IDIO-16, a port-mapped I/O card, ISA-style. Very retro. Subdriver changes: - OMAP changes to handle real time requirements. - Handle trigger types for edge and level IRQs on PL061 properly. As this hardware is very common it needs to set a proper example for others to follow. - Some container_of() cleanups. - Delete the unused MSM driver in favor of the driver that is embedded inside the pin control driver. - Cleanup of the ath79 GPIO driver used by many, many OpenWRT router targets. - A consolidated IT87xx driver replacing the earlier very specific IT8761e driver. - Handle the TI TCA9539 in the PCA953x driver. Also handle ACPI devices in this subdriver. - Drop xilinx arch dependencies as these FPGAs seem to profilate over a few different architectures. MIPS and ARM come to mind" * tag 'gpio-v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (57 commits) gpio: fix up SPI submenu gpio: drop surplus I2C dependencies gpio: drop surplus X86 dependencies gpio: dt-bindings: document the official use of "ngpios" gpio: MAINTAINERS: Add an entry for the ATH79 GPIO driver gpio / ACPI: Allow shared GPIO event to be read via operation region gpio: group port-mapped I/O drivers in a menu gpio: Add ACCES 104-IDIO-16 driver maintainer entry gpio: zynq: Document interrupt-controller DT binding gpio: xilinx: Drop architecture dependencies gpio: generic: Revert to old error handling in bgpio_map gpio: add a real time compliance notes Revert "gpio: add a real time compliance checklist" gpio: Add GPIO support for the ACCES 104-IDIO-16 gpio: driver for AMD Promontory gpio: xlp: Convert to use gpiolib irqchip helpers gpio: add a real time compliance checklist gpio/xilinx: enable for MIPS gpiolib: Add and use OF_GPIO_SINGLE_ENDED flag gpiolib: Split GPIO flags parsing and GPIO configuration ...

pinctrl: qcom: ssbi: fix compilation with DEBUG_FS=n

2015-10-16T20:35:52Z

The DEBUG_FS=n #defines for the dbg_show functions were missed when renaming the driver from msm_ to pm8xxx_, causing it to break the build when DEBUG_FS isn't enabled: CC [M] drivers/pinctrl/qcom/pinctrl-ssbi-gpio.o drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c:597:14: error: â€˜pm8xxx_gpio_dbg_showâ€™ undeclared here (not in a function) .dbg_show = pm8xxx_gpio_dbg_show, Fix this by renaming them correctly. Fixes: b4c45fe974bc ("pinctrl: qcom: ssbi: Family A gpio & mpp drivers") Signed-off-by: Jonas Gorski Reviewed-by: Bjorn Andersson Signed-off-by: Linus Walleij

pinctrl: replace trivial implementations of gpio_chip request/free

2015-10-16T20:20:21Z

Replace all trivial request/free callbacks that do nothing but call into pinctrl code with the generic versions. Signed-off-by: Jonas Gorski Acked-by: Bjorn Andersson Acked-by: Heiko Stuebner Acked-by: Eric Anholt Acked-by: Mika Westerberg Acked-by: Andrew Bresticker Acked-by: Baruch Siach Acked-by: Matthias Brugger Acked-by: Lee Jones Acked-by: Laxman Dewangan Acked-by: Maxime Ripard Signed-off-by: Linus Walleij

Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2015-09-18T15:11:42Z

Pull irq updates from Thomas Gleixner: "This is a rather large update post rc1 due to the final steps of cleanups and API changes which had to wait for the preparatory patches to hit your tree. - Regression fixes for ARM GIC irqchips - Regression fixes and lockdep anotations for renesas irq chips - The leftovers of the cleanup and preparatory patches which have been ignored by maintainers - Final conversions of the newly merged users of obsolete APIs - Final removal of obsolete APIs - Final removal of ARM artifacts which had been introduced during the conversion of ARM to the generic interrupt code. - Final split of the irq_data into chip specific and common data to reflect the needs of hierarchical irq domains. - Treewide removal of the first argument of interrupt flow handlers, i.e. the irq number, which is not used by the majority of handlers and simple to retrieve from the other argument the irq descriptor. - A few comment updates and build warning fixes" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits) arm64: Remove ununsed set_irq_flags ARM: Remove ununsed set_irq_flags sh: Kill off set_irq_flags usage irqchip: Kill off set_irq_flags usage gpu/drm: Kill off set_irq_flags usage genirq: Remove irq argument from irq flow handlers genirq: Move field 'msi_desc' from irq_data into irq_common_data genirq: Move field 'affinity' from irq_data into irq_common_data genirq: Move field 'handler_data' from irq_data into irq_common_data genirq: Move field 'node' from irq_data into irq_common_data irqchip/gic-v3: Use IRQD_FORWARDED_TO_VCPU flag irqchip/gic: Use IRQD_FORWARDED_TO_VCPU flag genirq: Provide IRQD_FORWARDED_TO_VCPU status flag genirq: Simplify irq_data_to_desc() genirq: Remove __irq_set_handler_locked() pinctrl/pistachio: Use irq_set_handler_locked gpio: vf610: Use irq_set_handler_locked powerpc/mpc8xx: Use irq_set_handler_locked() powerpc/ipic: Use irq_set_handler_locked() powerpc/cpm2: Use irq_set_handler_locked() ...

genirq: Remove irq argument from irq flow handlers

2015-09-16T13:47:51Z

Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner Cc: Julia Lawall Cc: Jiang Liu

pinctrl: qcom: ssbi: convert null test to IS_ERR test

2015-09-14T07:13:43Z

Since commit 323de9efdf3e ("pinctrl: make pinctrl_register() return proper error code"), pinctrl_register returns an error code rather than NULL on failure. Update some drivers that were introduced more recently. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @@ expression e,e1,e2; @@ e = pinctrl_register(...) ... when != e = e1 if ( - e == NULL + IS_ERR(e) ) { ... return - e2 + PTR_ERR(e) ; } // Signed-off-by: Julia Lawall Signed-off-by: Linus Walleij

pinctrl/qcom/msm: Prepare msm_gpio_irq_handler for irq argument removal

2015-07-17T19:56:22Z

The irq argument of most interrupt flow handlers is unused or merily used instead of a local variable. The handlers which need the irq argument can retrieve the irq number from the irq descriptor. Search and update was done with coccinelle and the invaluable help of Julia Lawall. Signed-off-by: Thomas Gleixner Cc: Julia Lawall Cc: Jiang Liu Cc: Linus Walleij Cc: linux-gpio@vger.kernel.org

pinctrl: Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc

2015-07-17T19:56:20Z

Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc while we already have a pointer to corresponding irq_desc. Signed-off-by: Jiang Liu Cc: Linus Walleij Cc: linux-gpio@vger.kernel.org Signed-off-by: Thomas Gleixner

pinctrl/qcom: Use irq_set_handler_locked()

2015-07-17T19:56:19Z

Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Search and replacement was done with coccinelle. Signed-off-by: Thomas Gleixner Cc: Jiang Liu Cc: Julia Lawall Cc: Linus Walleij Cc: linux-gpio@vger.kernel.org