linux/drivers/pinctrl, branch v3.18

pinctrl: baytrail: show output gpio state correctly on Intel Baytrail

2014-10-28T10:16:26Z

Even if a gpio pin is set to output, we still need to set INPUT_EN functionality (by clearing INPUT_EN bit) to be able to read the pin's level. E.g. without this change, we'll always read low level state from sysfs. Cc: # v3.14+ Cc: Mathias Nyman Signed-off-by: David Cohen Reviewed-by: Felipe Balbi Signed-off-by: Linus Walleij

pinctrl: baytrail: Clear DIRECT_IRQ bit

2014-10-20T07:05:05Z

Direct irq en bit should be cleared for pads using io mode. If not, the io based irq will never be detected. However, this bit can sometimes be misconfigured (BIOS issue). Force clearing of this bit in io mode and trigger a WARN. Signed-off-by: Loic Poulain Acked-by: Mika Westerberg Signed-off-by: Linus Walleij

Merge tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

2014-10-09T18:58:15Z

Pull GPIO changes from Linus Walleij: "This is the bulk of GPIO changes for the v3.18 development cycle: - Increase the default ARCH_NR_GPIO from 256 to 512. This was done to avoid having a custom header for the x86 architecture - GPIO is custom and complicated enough as it is already! We want to move to a radix to store the descriptors going forward, and finally get rid of this fixed array size altogether. - Endgame patching of the gpio_remove() semantics initiated by Abdoulaye Berthe. It is not accepted by the system that the removal of a GPIO chip fails during eg reboot or shutdown, and therefore the return value has now painfully been refactored away. For special cases like GPIO expanders on a hot-pluggable bus like USB, we may later add some gpiochip_try_remove() call, but for the cases we have now, return values are moot. - Some incremental refactoring of the gpiolib core and ACPI GPIO library for more descriptor usage. - Refactor the chained IRQ handler set-up method to handle also threaded, nested interrupts and set up the parent IRQ correctly. Switch STMPE and TC3589x drivers to use this registration method. - Add a .irq_not_threaded flag to the struct gpio_chip, so that also GPIO expanders that block but are still not using threaded IRQ handlers. - New drivers for the ARM64 X-Gene SoC GPIO controller. - The syscon GPIO driver has been improved to handle the "DSP GPIO" found on the TI Keystone 2 SoC:s. - ADNP driver switched to use gpiolib irqchip helpers. - Refactor the DWAPB driver to support being instantiated from and MFD cell (platform device). - Incremental feature improvement in the Zynq, MCP23S08, DWAPB, OMAP, Xilinx and Crystalcove drivers. - Various minor fixes" * tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (52 commits) gpio: pch: Build context save/restore only for PM pinctrl: abx500: get rid of unused variable gpio: ks8695: fix 'else should follow close brace '}'' gpio: stmpe: add verbose debug code gpio: stmpe: fix up interrupt enable logic gpio: staticize xway_stp_init() gpio: handle also nested irqchips in the chained handler set-up gpio: set parent irq on chained handlers gpiolib: irqchip: use irq_find_mapping while removing irqchip gpio: crystalcove: support virtual GPIO pinctrl: bcm281xx: make Kconfig dependency more strict gpio: kona: enable only on BCM_MOBILE or for compile testing gpio, bcm-kona, LLVMLinux: Remove use of __initconst gpio: Fix ngpio in gpio-xilinx driver gpio: dwapb: fix pointer to integer cast gpio: xgene: Remove unneeded #ifdef CONFIG_OF guard gpio: xgene: Remove unneeded forward declation for struct xgene_gpio gpio: xgene: Fix missing spin_lock_init() gpio: ks8695: fix switch case indentation gpiolib: add irq_not_threaded flag to gpio_chip ...

Merge tag 'pinctrl-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2014-10-08T00:56:28Z

Pull pin control changes from Linus Walleij: "This is the bulk of pin control changes for the v3.18 development series: - New drivers for the Freescale i.MX21, Qualcomm APQ8084 pin controllers. - Incremental new features on the Rockchip, atlas 6, OMAP, AM437x, APQ8064, prima2, AT91, Tegra, i.MX, Berlin and Nomadik. - Push Freescale drivers down into their own subdirectory. - Assorted sprays of syntax and semantic fixes" * tag 'pinctrl-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (48 commits) pinctrl: specify bindings for pins and groups pinctrl: nomadik: improve GPIO debug prints pinctrl: abx500: refactor DT parser to take two paths pinctrl: abx500: use helpers for map allocation/free pinctrl: alter device tree bindings for functions pinctrl: nomadik: refactor DT parser to take two paths pinctrl: nomadik: use utils map free function pinctrl: nomadik: use util function to reserve maps pinctrl: qcom: use restart_notifier mechanism for ps_hold pinctrl: sh-pfc: sh73a0: Remove unnecessary SoC data allocation pinctrl: berlin: fix the dt_free_map function pinctrl: at91: disable PD or PU before enabling PU or PD pinctrl: st: remove gpiochip in failure cases pinctrl: at91: Fix error handling while doing gpiochio_irqchip_add pinctrl: at91: Fix failure path in at91_gpio_probe path pinctrl: lantiq: Release gpiochip resources in fail case pinctrl: imx: detect uninitialized pins pinctrl: tegra: Add MIPI pad control pinctrl: at91: Switch to using managed clk_get pinctrl: adi2: Remove duplicate gpiochip_remove_pin_ranges ...

pinctrl: abx500: get rid of unused variable

2014-10-02T14:07:00Z

commit 2fcea6cecbc965b4e02a39537d9d939f5251bbbd "pinctrl: remove remaining users of gpiochip_remove() retval" removed the use of the return value from gpiochip_remove() but missed to delete the dangling "err" variable: drivers/pinctrl/nomadik/pinctrl-abx500.c: In function 'abx500_gpio_probe': drivers/pinctrl/nomadik/pinctrl-abx500.c:1208:11: warning: unused variable 'err' [-Wunused-variable] Fix this by getting rid of the dangling variable. Reported-by: Arnd Bergmann Signed-off-by: Linus Walleij

pinctrl: nomadik: improve GPIO debug prints

2014-09-30T13:07:22Z

The debugfs file would only define if the line was "pulled" and not which direction (pull up or pull down). Improve this by taking two print paths depending on whether the pin is set as input or output and use the data register directly to figure out whether the pin is set for pull up or pull down. Signed-off-by: Linus Walleij

pinctrl: abx500: refactor DT parser to take two paths

2014-09-30T09:23:28Z

We refactor the DT parser to look for either a config or a function and then look for further nodes and reserve maps, not the two things mixed up like prior to this patch. Signed-off-by: Linus Walleij

pinctrl: abx500: use helpers for map allocation/free

2014-09-30T09:23:19Z

This switches the abx500 driver to use the pin control helper utils for allocating and free:ing maps. Signed-off-by: Linus Walleij

pinctrl: nomadik: refactor DT parser to take two paths

2014-09-29T14:54:14Z

pinctrl: nomadik: use utils map free function

2014-09-29T13:22:20Z

Stop brewing our own map free function and rely on the pinctrl utils helpers. Signed-off-by: Linus Walleij