linux/drivers/pinctrl, branch v5.7

pinctrl: qcom: Add affinity callbacks to msmgpio IRQ chip

2020-05-12T12:29:29Z

Wakeup capable GPIO IRQs routed via PDC are not being migrated when a CPU is hotplugged. Add affinity callbacks to msmgpio IRQ chip to update the affinity of wakeup capable IRQs. Fixes: e35a6ae0eb3a ("pinctrl/msm: Setup GPIO chip in hierarchy") Signed-off-by: Venkata Narendra Kumar Gutta [mkshah: updated commit text and minor code fixes] Signed-off-by: Maulik Shah Tested-by: Douglas Anderson Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/1588314617-4556-1-git-send-email-mkshah@codeaurora.org Signed-off-by: Linus Walleij

Merge tag 'intel-pinctrl-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into fixes

2020-04-17T14:36:04Z

intel-pinctrl for v5.7-2 * Enable pin configuration setting for Baytrail * Fix interrupt handling due to hardware sighting for Cherryview * Fix PAD lock offset for Sunrisepoint-H The following is an automated git shortlog grouped by driver: baytrail: - Enable pin configuration setting for GPIO chip cherryview: - Add missing spinlock usage in chv_gpio_irq_handler sunrisepoint: - Fix PAD lock register offset for SPT-H

pinctrl: cherryview: Add missing spinlock usage in chv_gpio_irq_handler

2020-04-17T11:37:40Z

According to Braswell NDA Specification Update (#557593), concurrent read accesses may result in returning 0xffffffff and write instructions may be dropped. We have an established format for the commit references, i.e. cdca06e4e859 ("pinctrl: baytrail: Add missing spinlock usage in byt_gpio_irq_handler") Fixes: 0bd50d719b00 ("pinctrl: cherryview: prevent concurrent access to GPIO controllers") Signed-off-by: Grace Kao Reported-by: Brian Norris Reviewed-by: Brian Norris Acked-by: Mika Westerberg Signed-off-by: Andy Shevchenko

pinctrl: qcom: fix wrong write in update_dual_edge

2020-04-16T11:15:40Z

Fix a typo in the readl/writel accessor conversion where val is used instead of pol changing the behavior of the original code. Cc: stable@vger.kernel.org Fixes: 6c73698904aa pinctrl: qcom: Introduce readl/writel accessors Signed-off-by: Ansuel Smith Reviewed-by: Bjorn Andersson Link: https://lore.kernel.org/r/20200414003726.25347-1-ansuelsmth@gmail.com Signed-off-by: Linus Walleij

pinctrl: actions: fix function group name for i2c0_group

2020-04-16T11:10:05Z

After commit 6f87359e8bca ("pinctrl: actions: Fix functions groups names for S700 SoC") following error has been observed while booting Linux on Cubieboard7-lite(based on S700 SoC). [ 1.206245] pinctrl-s700 e01b0000.pinctrl: invalid group "i2c0_mfp" for function "i2c0" This commit fixes it by using correct name for i2c0_group. Fixes: 6f87359e8bca ("pinctrl: actions: Fix functions groups names for S700 SoC") Signed-off-by: Amit Singh Tomar Link: https://lore.kernel.org/r/1586757913-5438-1-git-send-email-amittomer25@gmail.com Reviewed-by: Manivannan Sadhasivam Signed-off-by: Linus Walleij

pinctrl: mediatek: remove shadow variable declaration

2020-04-16T08:01:30Z

Remove shadow declaration of variable 'pullup' in mtk_pinconf_get() Signed-off-by: Light Hsieh Reviewed-by: Stanley Chu Link: https://lore.kernel.org/r/1586255632-27528-1-git-send-email-light.hsieh@mediatek.com Signed-off-by: Linus Walleij

pinctrl: baytrail: Enable pin configuration setting for GPIO chip

2020-04-13T10:14:35Z

It appears that pin configuration for GPIO chip hasn't been enabled yet due to absence of ->set_config() callback. Enable it here for Intel Baytrail. Fixes: c501d0b149de ("pinctrl: baytrail: Add pin control operations") Depends-on: 2956b5d94a76 ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips") Signed-off-by: Andy Shevchenko Acked-by: Mika Westerberg

pinctrl: sunrisepoint: Fix PAD lock register offset for SPT-H

2020-04-13T10:14:35Z

It appears that SPT-H variant has different offset for PAD locking registers. Fix it here. Fixes: 551fa5801ef1 ("pinctrl: intel: sunrisepoint: Add Intel Sunrisepoint-H support") Signed-off-by: Andy Shevchenko Acked-by: Mika Westerberg

Merge tag 'gpio-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

2020-04-04T17:27:00Z

Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO development for the v5.7 kernel cycle. Core and userspace API: - The userspace API KFIFOs have been imoproved with locks that do not block interrupts. This makes us better at getting events to userspace without blocking or disturbing new events arriving in the same time. This was reviewed by the KFIFO maintainer Stefani. This is a generic improvement which paves the road for similar improvements in other subsystems. - We provide a new ioctl() for monitoring changes in the line information, such as when multiple clients are taking lines and giving them back, possibly reconfiguring them in the process: we can now monitor that and not get stuck with stale static information. - An example tool 'gpio-watch' is provided to showcase this functionality. - Timestamps for events are switched to ktime_get_ns() which is monotonic. We previously had a 'realtime' stamp which could move forward and *backward* in time, which probably would just cause silent bugs and weird behaviour. In the long run we see two relevant timestamps: ktime_get_ns() or the timestamp sometimes provided by the GPIO hardware itself, if that exists. - Device Tree overlay support for GPIO hogs. On systems that load overlays, these overlays can now contain hogs, and will then be respected. - Handle pin control interaction with nonexisting pin ranges in the GPIO library core instead of in the individual drivers. New drivers: - New driver for the Mellanox BlueField 2 GPIO controller. Driver improvements: - Introduce the BGPIOF_NO_SET_ON_INPUT flag to the generic MMIO GPIO library and use this flag in the MT7621 driver. - Texas Instruments OMAP CPU power management improvements, such as blocking of idle on pending GPIO interrupts" * tag 'gpio-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (59 commits) Revert "gpio: eic-sprd: Use devm_platform_ioremap_resource()" pinctrl: Unconditionally assign .request()/.free() gpio: Unconditionally assign .request()/.free() gpio: export of_pinctrl_get to modules pinctrl: Define of_pinctrl_get() dummy for !PINCTRL gpio: Rename variable in core APIs gpio: Avoid using pin ranges with !PINCTRL gpiolib: Remove unused gpio_chip parameter from gpio_set_bias() gpiolib: Pass gpio_desc to gpio_set_config() gpiolib: Introduce gpiod_set_config() tools: gpio: Fix out-of-tree build regression gpio: gpiolib: fix a doc warning gpio: tegra186: Add Tegra194 pin ranges for GG.0 and GG.1 gpio: tegra186: Add support for pin ranges gpio: Support GPIO controllers without pin-ranges ARM: integrator: impd1: Use GPIO_LOOKUP() helper macro gpio: brcmstb: support gpio-line-names property tools: gpio: Fix typo in gpio-utils tools: gpio-hammer: Apply scripts/Lindent and retain good changes gpiolib: gpio_name_to_desc: factor out !name check ...

Merge tag 'pinctrl-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2020-04-02T22:47:18Z

Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.7 kernel cycle. There are no core changes this time, only driver developments: - New driver for the Dialog Semiconductor DA9062 Power Management Integrated Circuit (PMIC). - Renesas SH-PFC has improved consistency, with group and register checks in the configuration checker. - New subdriver for the Qualcomm IPQ6018. - Add the RGMII pin control functionality to Qualcomm IPQ8064. - Performance and code quality cleanups in the Mediatek driver. - Improve the Broadcom BCM2835 support to cover all the GPIOs that exist in it. - The Allwinner/Sunxi driver properly masks non-wakeup IRQs on suspend. - Add some missing groups and functions to the Ingenic driver. - Convert some of the Freescale device tree bindings to use the new and all improved JSON YAML markup. - Refactorings and support for the SFIO/GPIO in the Tegra194 SoC driver. - Support high impedance mode in the Spreadtrum/Unisoc driver" * tag 'pinctrl-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (64 commits) pinctrl: qcom: fix compilation error pinctrl: qcom: use scm_call to route GPIO irq to Apps pinctrl: sprd: Add pin high impedance mode support pinctrl: sprd: Use the correct pin output configuration pinctrl: tegra: Add SFIO/GPIO programming on Tegra194 pinctrl: tegra: Renumber the GG.0 and GG.1 pins pinctrl: tegra: Do not add default pin range on Tegra194 pinctrl: tegra: Pass struct tegra_pmx for pin range check pinctrl: tegra: Fix "Scmitt" -> "Schmitt" typo pinctrl: tegra: Fix whitespace issues for improved readability pinctrl: mediatek: Use scnprintf() for avoiding potential buffer overflow pinctrl: freescale: drop the dependency on ARM64 for i.MX8M Revert "pinctrl: mvebu: armada-37xx: use use platform api" dt-bindings: pinctrl: at91: Fix a typo ("descibe") pinctrl: meson: add tsin pinctrl for meson gxbb/gxl/gxm pinctrl: sprd: Fix the kconfig warning pinctrl: ingenic: add hdmi-ddc pin control group pinctrl: sirf/atlas7: Replace zero-length array with flexible-array member pinctrl: sprd: Allow the SPRD pinctrl driver building into a module pinctrl: Export some needed symbols at module load time ...