linux/drivers/pinctrl, branch v6.15

pinctrl: qcom: switch to devm_register_sys_off_handler()

2025-05-20T21:41:29Z

Error-handling paths in msm_pinctrl_probe() don't call a function required to unroll restart handler registration, unregister_restart_handler(). Instead of adding calls to this function, switch the msm pinctrl code into using devm_register_sys_off_handler(). Fixes: cf1fc1876289 ("pinctrl: qcom: use restart_notifier mechanism for ps_hold") Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/20250513-pinctrl-msm-fix-v2-2-249999af0fc1@oss.qualcomm.com Signed-off-by: Linus Walleij

pinctrl: qcom: Fix PINGROUP definition for sm8750

2025-04-29T08:27:25Z

On newer SoCs intr_target_bit position is at 8 instead of 5. Fix it. Also add missing intr_wakeup_present_bit and intr_wakeup_enable_bit which enables forwarding of GPIO interrupts to parent PDC interrupt controller. Fixes: afe9803e3b82 ("pinctrl: qcom: Add sm8750 pinctrl driver") Signed-off-by: Maulik Shah Reviewed-by: Abel Vesa Reviewed-by: Dmitry Baryshkov Reviewed-by: Melody Olvera Link: https://lore.kernel.org/20250429-pinctrl_sm8750-v2-1-87d45dd3bd82@oss.qualcomm.com Signed-off-by: Linus Walleij

pinctrl: mediatek: common-v1: Fix error checking in mtk_eint_init()

2025-04-23T10:58:57Z

The devm_kzalloc() function doesn't return error pointers, it returns NULL on error. Then on the next line it checks the same pointer again by mistake, "->base" instead of "->base[0]". Fixes: fe412e3a6c97 ("pinctrl: mediatek: common-v1: Fix EINT breakage on older controllers") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/aAijc10fHka1WAMX@stanley.mountain Signed-off-by: Linus Walleij

pinctrl: mediatek: Fix new design debounce issue

2025-04-23T08:45:23Z

Calculate the true offset of eint according to index. Fixes: 3ef9f710efcb ("pinctrl: mediatek: Add EINT support for multiple addresses") Signed-off-by: Hao Chang Signed-off-by: Qingliang Li Link: https://lore.kernel.org/20250422075216.14073-1-ot_chhao.chang@mediatek.com Signed-off-by: Linus Walleij

pinctrl: mediatek: common-v1: Fix EINT breakage on older controllers

2025-04-17T07:44:52Z

When EINT support for multiple addresses was introduced, the driver library for the older generations (pinctrl-mtk-common) was not fixed together. This resulted in invalid pointer accesses. Fix up the filled in |struct mtk_eint| in pinctrl-mtk-common to match what is now expected by the mtk-eint library. Reported-by: Uwe Kleine-König Tested-by: Uwe Kleine-König Closes: https://lore.kernel.org/all/43nd5jxpk7b7fv46frqlfjnqfh5jlpqsemeoakqzd4wdi3df6y@w7ycd3k5ezvn/ Fixes: 3ef9f710efcb ("pinctrl: mediatek: Add EINT support for multiple addresses") Cc: Hao Chang Cc: Qingliang Li Signed-off-by: Chen-Yu Tsai Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/20250415112339.2385454-1-wenst@chromium.org Signed-off-by: Linus Walleij

pinctrl: airoha: fix wrong PHY LED mapping and PHY2 LED defines

2025-04-15T07:59:04Z

The current PHY2 LED define are wrong and actually set BITs outside the related mask. Fix it and set the correct value. While at it, also use FIELD_PREP_CONST macro to make it simple to understand what values are actually applied for the mask. Also fix wrong PHY LED mapping. The SoC Switch supports up to 4 port but the register define mapping for 5 PHY port, starting from 0. The mapping was wrongly defined starting from PHY1. Reorder the function group to start from PHY0. PHY4 is actually never supported as we don't have a GPIO pin to assign. Cc: stable@vger.kernel.org Fixes: 1c8ace2d0725 ("pinctrl: airoha: Add support for EN7581 SoC") Reviewed-by: Benjamin Larsson Signed-off-by: Christian Marangi Acked-by: Lorenzo Bianconi Link: https://lore.kernel.org/20250401135026.18018-1-ansuelsmth@gmail.com Signed-off-by: Linus Walleij

pinctrl: meson: define the pull up/down resistor value as 60 kOhm

2025-04-15T07:47:37Z

The public datasheets of the following Amlogic SoCs describe a typical resistor value for the built-in pull up/down resistor: - Meson8/8b/8m2: not documented - GXBB (S905): 60 kOhm - GXL (S905X): 60 kOhm - GXM (S912): 60 kOhm - G12B (S922X): 60 kOhm - SM1 (S905D3): 60 kOhm The public G12B and SM1 datasheets additionally state min and max values: - min value: 50 kOhm for both, pull-up and pull-down - max value for the pull-up: 70 kOhm - max value for the pull-down: 130 kOhm Use 60 kOhm in the pinctrl-meson driver as well so it's shown in the debugfs output. It may not be accurate for Meson8/8b/8m2 but in reality 60 kOhm is closer to the actual value than 1 Ohm. Signed-off-by: Martin Blumenstingl Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/20250329190132.855196-1-martin.blumenstingl@googlemail.com Signed-off-by: Linus Walleij

pinctrl: imx: Return NULL if no group is matched and found

2025-04-15T07:42:15Z

Currently if no group is matched and found, this function will return the last grp to the caller, this is not expected, it is supposed to return NULL in this case. Fixes: e566fc11ea76 ("pinctrl: imx: use generic pinctrl helpers for managing groups") Signed-off-by: Hui Wang Reviewed-by: Frank Li Link: https://lore.kernel.org/20250327031600.99723-1-hui.wang@canonical.com Signed-off-by: Linus Walleij

Merge tag 'pinctrl-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2025-03-29T23:59:16Z

Pull pin control updates from Linus Walleij: "Core changes: - None really. New drivers: - AMD ISP411 "AMD ISP" driver - Exynos 2200 and 7870 SoC subdrivers - Sophgo RISC-V SG2042 and SG2044 subdrivers - Amlogic A4 subdriver - Rockchip RK3528 subdriver - Broadcom BCM21664 subdriver - Allwinner A523/T527 subdriver - Ingenic X1600 subdriver - Microchip SAMA7D65 subdriver, essentially a re-branded Atmel AT91 PIO4 driver, but nowadays a Microschip SoC line Improvements: - Bring in the devm_kmemdup_array() helper and use it throughout, also bring in changes to other subsystems for this to establish this helper - Support EGPIO on the Qualcomm SA8775P SoC - Extend EINT support in the Mediatek driver" * tag 'pinctrl-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (101 commits) pinctrl: mediatek: Add EINT support for multiple addresses pinctrl: amlogic-a4: Drop surplus semicolon pinctrl: nuvoton: Reduce use of OF-specific APIs pinctrl: nuvoton: Convert to use struct group_desc pinctrl: nuvoton: Make use of struct pinfunction and PINCTRL_PINFUNCTION() pinctrl: nuvoton: Convert to use struct pingroup and PINCTRL_PINGROUP() pinctrl: npcm8xx: Fix incorrect struct npcm8xx_pincfg assignment pinctrl: tegra: Fix off by one in tegra_pinctrl_get_group() pinctrl: PINCTRL_AMDISP should depend on DRM_AMD_ISP pinctrl: qcom: sa8775p: Enable egpio function dt-bindings: pinctrl: qcom: Add egpio function for sa8775p pinctrl: qcom: tlmm-test: Validate irq_enable delivers edge irqs pinctrl: qcom: Clear latched interrupt status when changing IRQ type dt-bindings: pinctrl: airoha: Add missing gpio-ranges property pinctrl: bcm281xx: Add missing assignment in bcm21664_pinctrl_lock_all() pinctrl: amd: isp411: Fix IS_ERR() vs NULL check in probe() dt-bindings: pinctrl: at91-pio4: add microchip,sama7d65-pinctrl pinctrl: tegra: Set SFIO mode to Mux Register pinctrl-tegra: Restore SFSEL bit when freeing pins pinctrl: tegra: Add descriptions for SoC data fields ...

pinctrl: mediatek: Add EINT support for multiple addresses

2025-03-24T07:51:09Z

For flexible routing, eint will be divided into 5 bases, and it will obtain the operation address through the pins array. Signed-off-by: Hao Chang Signed-off-by: Qingliang Li Link: https://lore.kernel.org/20250322035307.4811-2-ot_chhao.chang@mediatek.com Signed-off-by: Linus Walleij