linux/drivers/platform, branch v3.19

Revert "platform: x86: dell-laptop: Add support for keyboard backlight"

2015-01-23T19:10:32Z

This reverts commit 02b2aaaa57ab41504e8d03a3b2ceeb9440a2c188. This interface was determined to be flawed and required too invasive a fix for the RC cycle. This will be revisited in 3.20. Signed-off-by: Darren Hart

Merge tag 'platform-drivers-x86-v3.19-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

2014-12-19T04:24:55Z

Pull x86 platform driver update from Darren Hart: - thinkpad-acpi: Switch to software mute, cleanups - acerhdf: Bang-bang thermal governor, new models, cleanups - dell-laptop: New keyboard backlight support and documentation - toshiba_acpi: Keyboard backlight updates, hotkey handling - dell-wmi: Keypress filtering, WMI event processing - eeepc-laptop: Multiple cleanups, improved error handling, documentation - hp_wireless: Inform the user if hp_wireless_input_setup()/add() fails - misc: Code cleanups, quirks, various new IDs * tag 'platform-drivers-x86-v3.19-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (33 commits) platform/x86/acerhdf: Still depends on THERMAL Documentation: Add entry for dell-laptop sysfs interface acpi: Remove _OSI(Linux) for ThinkPads thinkpad-acpi: Try to use full software mute control acerhdf: minor clean up acerhdf: added critical trip point acerhdf: Use bang-bang thermal governor acerhdf: Adding support for new models acerhdf: Adding support for "manual mode" dell-smo8800: Add more ACPI ids and change description of driver platform: x86: dell-laptop: Add support for keyboard backlight toshiba_acpi: Add keyboard backlight mode change event toshiba_acpi: Change notify funtion to handle more events toshiba_acpi: Move hotkey enabling code to its own function dell-wmi: Don't report keypresses on keybord illumination change dell-wmi: Don't report keypresses for radio state changes hp_wireless: Inform the user if hp_wireless_input_setup()/add() fails toshiba-acpi: Add missing ID (TOS6207) Sony-laptop: Deletion of an unnecessary check before the function call "pci_dev_put" platform: x86: Deletion of checks before backlight_device_unregister() ...

platform/x86/acerhdf: Still depends on THERMAL

2014-12-15T17:29:58Z

acerhdf uses thermal interfaces so it should depend on THERMAL. It also should not select a thermal driver without checking that THERMAL is enabled. This fixes the following build errors when THERMAL=m and ACERHDF=y. drivers/built-in.o: In function `acerhdf_set_mode': acerhdf.c:(.text+0x3e02e1): undefined reference to `thermal_zone_device_update' drivers/built-in.o: In function `acerhdf_unbind': acerhdf.c:(.text+0x3e052d): undefined reference to `thermal_zone_unbind_cooling_device' drivers/built-in.o: In function `acerhdf_bind': acerhdf.c:(.text+0x3e0593): undefined reference to `thermal_zone_bind_cooling_device' drivers/built-in.o: In function `acerhdf_init': acerhdf.c:(.init.text+0x1c2f5): undefined reference to `thermal_cooling_device_register' acerhdf.c:(.init.text+0x1c360): undefined reference to `thermal_zone_device_register' drivers/built-in.o: In function `acerhdf_unregister_thermal': acerhdf.c:(.text.unlikely+0x3c67): undefined reference to `thermal_cooling_device_unregister' acerhdf.c:(.text.unlikely+0x3c91): undefined reference to `thermal_zone_device_unregister' Signed-off-by: Randy Dunlap Acked-by: Peter Feuerer Signed-off-by: Darren Hart

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2014-12-15T00:10:09Z

Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev__once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...

Merge branch 'thinkpad-acpi' into for-next

2014-12-11T04:53:08Z

thinkpad-acpi: acpi: Remove _OSI(Linux) for ThinkPads thinkpad-acpi: Try to use full software mute control Signed-off-by: Darren Hart

thinkpad-acpi: Try to use full software mute control

2014-12-04T12:03:22Z

ThinkPads have hardware volume controls and three buttons to control them. (These are separate from the standard mixer.) By default, the buttons are: - Mute: Mutes the hardware volume control and, on some models, generates KEY_MUTE. - Up: Unmutes, generates KEY_VOLUMEUP, and increases volume if applicable. (Newer thinkpads only have hardware mute/unmute.) - Down: Unmutes, generates KEY_VOLUMEDOWN, and decreases volume if applicable. This behavior is unfortunate, since modern userspace will also handle the hotkeys and change the other mixer. If the software mixer is muted and the hardware mixer is unmuted and you push mute, hilarity ensues as they both switch state. Rather than adding a lot of complex ALSA integration to fix this, just disable the special ThinkPad volume controls when possible. This turns the mute and volume buttons into regular buttons, and standard software controls will work as expected. ALSA already knows about the mute light on models with a mute light, so everything should just work. This should also allow us to remove _OSI(Linux) for all ThinkPads. For future reference: It turns out that we can ask ACPI for one of three behaviors directly on very new models. They are "latch" (the default), "none" (no automatic control), and "toggle" (mute unmutes when muted). All of the modes besides "none" seem to be a bit buggy, though, and there doesn't seem to be a consistent way to get any notification when the HW mute state is changed. Signed-off-by: Andy Lutomirski Acked-by: Henrique de Moraes Holschuh Signed-off-by: Darren Hart

acerhdf: minor clean up

2014-12-04T11:24:56Z

* renamed bios_settings_t to bios_settings, as it is no typedef * replaced "unsigned char" by u8 in bios_settings struct for better readability. Cc: platform-driver-x86@vger.kernel.org Cc: Darren Hart Cc: Andrew Morton Cc: Andreas Mohr Acked-by: Borislav Petkov Signed-off-by: Peter Feuerer Signed-off-by: Darren Hart

acerhdf: added critical trip point

2014-12-04T11:24:55Z

added critical trip point which represents the temperature limit. Added return -EINVAL in case wrong trip point is provided. Cc: platform-driver-x86@vger.kernel.org Cc: Darren Hart Cc: Andrew Morton Cc: Andreas Mohr Cc: Borislav Petkov Cc: Javi Merino Signed-off-by: Peter Feuerer Signed-off-by: Darren Hart

acerhdf: Use bang-bang thermal governor

2014-12-04T11:24:55Z

acerhdf has been doing an on-off fan control using hysteresis by post-manipulating the outcome of thermal subsystem trip point handling. This patch enables acerhdf to use the bang-bang governor, which is intended for on-off controlled fans. Cc: platform-driver-x86@vger.kernel.org Cc: Darren Hart Cc: Andrew Morton CC: Zhang Rui Cc: Andreas Mohr Cc: Javi Merino Acked-and-tested-by: Borislav Petkov Signed-off-by: Peter Feuerer Signed-off-by: Darren Hart

acerhdf: Adding support for new models

2014-12-04T11:24:55Z

added following new models: * Aspire 5755G * AO521 * AO751h * Aspire One 753 * Extensa 5420 * Aspire 5315 * Aspire 5739G * TravelMate TM8573T Cc: platform-driver-x86@vger.kernel.org Cc: Darren Hart Cc: Andrew Morton Cc: Andreas Mohr Acked-by: Borislav Petkov Signed-off-by: Peter Feuerer Signed-off-by: Darren Hart