linux/drivers/platform, branch v5.11

platform/x86: dell-wmi-sysman: fix a NULL pointer dereference

2021-01-31T21:05:35Z

An upcoming Dell platform is causing a NULL pointer dereference in dell-wmi-sysman initialization. Validate that the input from BIOS matches correct ACPI types and abort module initialization if it fails. Signed-off-by: Mario Limonciello Tested-by: Perry Yuan Link: https://lore.kernel.org/r/20210129172654.2326751-1-mario.limonciello@dell.com [hdegoede@redhat.com: Drop redundant release_attributes_data() call] Signed-off-by: Hans de Goede

platform/x86: hp-wmi: Disable tablet-mode reporting by default

2021-01-25T21:06:49Z

Recently userspace has started making more use of SW_TABLET_MODE (when an input-dev reports this). Specifically recent GNOME3 versions will: 1. When SW_TABLET_MODE is reported and is reporting 0: 1.1 Disable accelerometer-based screen auto-rotation 1.2 Disable automatically showing the on-screen keyboard when a text-input field is focussed 2. When SW_TABLET_MODE is reported and is reporting 1: 2.1 Ignore input-events from the builtin keyboard and touchpad (this is for 360° hinges style 2-in-1s where the keyboard and touchpads are accessible on the back of the tablet when folded into tablet-mode) This means that claiming to support SW_TABLET_MODE when it does not actually work / reports correct values has bad side-effects. The check in the hp-wmi code which is used to decide if the input-dev should claim SW_TABLET_MODE support, only checks if the HPWMI_HARDWARE_QUERY is supported. It does *not* check if the hardware actually is capable of reporting SW_TABLET_MODE. This leads to the hp-wmi input-dev claiming SW_TABLET_MODE support, while in reality it will always report 0 as SW_TABLET_MODE value. This has been seen on a "HP ENVY x360 Convertible 15-cp0xxx" and this likely is the case on a whole lot of other HP models. This problem causes both auto-rotation and on-screen keyboard support to not work on affected x360 models. There is no easy fix for this, but since userspace expects SW_TABLET_MODE reporting to be reliable when advertised it is better to not claim/report SW_TABLET_MODE support at all, then to claim to support it while it does not work. To avoid the mentioned problems, add a new enable_tablet_mode_sw module-parameter which defaults to false. Note I've made this an int using the standard -1=auto, 0=off, 1=on triplett, with the hope that in the future we can come up with a better way to detect SW_TABLET_MODE support. ATM the default auto option just does the same as off. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1918255 Cc: Stefan Brüns Signed-off-by: Hans de Goede Acked-by: Mark Gross Link: https://lore.kernel.org/r/20210120124941.73409-1-hdegoede@redhat.com

platform/x86: thinkpad_acpi: Add P53/73 firmware to fan_quirk_table for dual fan control

2021-01-18T20:42:01Z

This commit enables dual fan control for the new Lenovo P53 and P73 laptop models. Signed-off-by: Jeannie Stevenson Link: https://lore.kernel.org/r/Pn_Xii4XYpQRFtgkf4PbNgieE89BAkHgLI1kWIq-zFudwh2A1DY5J_DJVHK06rMW_hGPHx_mPE33gd8mg9-8BxqJTaSC6hhPqAsfZlcNGH0=@protonmail.com Signed-off-by: Hans de Goede

platform/x86: hp-wmi: Don't log a warning on HPWMI_RET_UNKNOWN_COMMAND errors

2021-01-18T20:41:53Z

The recently added thermal policy support makes a hp_wmi_perform_query(0x4c, ...) call on older devices which do not support thermal policies this causes the following warning to be logged (seen on a HP Stream x360 Convertible PC 11): [ 26.805305] hp_wmi: query 0x4c returned error 0x3 Error 0x3 is HPWMI_RET_UNKNOWN_COMMAND error. This commit silences the warning for unknown-command errors, silencing the new warning. Cc: Elia Devito Fixes: 81c93798ef3e ("platform/x86: hp-wmi: add support for thermal policy") Link: https://lore.kernel.org/r/20210114232744.154886-1-hdegoede@redhat.com Signed-off-by: Hans de Goede

platform/x86: intel-vbtn: Drop HP Stream x360 Convertible PC 11 from allow-list

2021-01-18T18:42:23Z

THe HP Stream x360 Convertible PC 11 DSDT has the following VGBS function: Method (VGBS, 0, Serialized) { If ((^^PCI0.LPCB.EC0.ROLS == Zero)) { VBDS = Zero } Else { VBDS = Zero } Return (VBDS) /* \_SB_.VGBI.VBDS */ } Which is obviously wrong, because it always returns 0 independent of the 2-in-1 being in laptop or tablet mode. This causes the intel-vbtn driver to initially report SW_TABLET_MODE = 1 to userspace, which is known to cause problems when the 2-in-1 is actually in laptop mode. During earlier testing this turned out to not be a problem because the 2-in-1 would do a Notify(..., 0xCC) or Notify(..., 0xCD) soon after the intel-vbtn driver loaded, correcting the SW_TABLET_MODE state. Further testing however has shown that this Notify() soon after the intel-vbtn driver loads, does not always happen. When the Notify does not happen, then intel-vbtn reports SW_TABLET_MODE = 1 resulting in a non-working touchpad. IOW the tablet-mode reporting is not reliable on this device, so it should be dropped from the allow-list, fixing the touchpad sometimes not working. Fixes: 8169bd3e6e19 ("platform/x86: intel-vbtn: Switch to an allow-list for SW_TABLET_MODE reporting") Link: https://lore.kernel.org/r/20210114143432.31750-1-hdegoede@redhat.com Signed-off-by: Hans de Goede

platform/x86: ideapad-laptop: Disable touchpad_switch for ELAN0634

2021-01-13T10:25:26Z

Newer ideapads (e.g.: Yoga 14s, 720S 14) come with ELAN0634 touchpad do not use EC to switch touchpad. Reading VPCCMD_R_TOUCHPAD will return zero thus touchpad may be blocked unexpectedly. Writing VPCCMD_W_TOUCHPAD may cause a spurious key press. Add has_touchpad_switch to workaround these machines. Signed-off-by: Jiaxun Yang Cc: stable@vger.kernel.org # 5.4+ -- v2: Specify touchpad to ELAN0634 v3: Stupid missing ! in v2 v4: Correct acpi_dev_present usage (Hans) Link: https://lore.kernel.org/r/20210107144438.12605-1-jiaxun.yang@flygoat.com Signed-off-by: Hans de Goede

platform/x86: amd-pmc: Fix CONFIG_DEBUG_FS check

2021-01-04T14:57:26Z

lkp reported that CONFIG_DEBUG_FS was not defined because of wrong usage if macro, correcting it now. Fixes: 156ec4731cb2 ("platform/x86: amd-pmc: Add AMD platform support for S2Idle") Reported-by: kernel test robot Signed-off-by: Shyam Sundar S K Link: https://lore.kernel.org/r/20201230081028.2615217-1-Shyam-sundar.S-k@amd.com Signed-off-by: Hans de Goede

platform/x86: thinkpad_acpi: correct palmsensor error checking

2021-01-04T14:55:30Z

The previous commit adding functionality for the palm sensor had a mistake which meant the error conditions on initialisation was not checked correctly. On some older platforms this meant that if the sensor wasn't available an error would be returned and the driver would fail to load. This commit corrects the error condition. Many thanks to Mario Oenning for reporting and determining the issue Signed-off-by: Mark Pearson Link: https://lore.kernel.org/r/20201230024726.7861-1-markpearson@lenovo.com Signed-off-by: Hans de Goede

platform/x86: intel-vbtn: Support for tablet mode on Dell Inspiron 7352

2021-01-04T14:54:45Z

The Dell Inspiron 7352 is a 2-in-1 model that has chassis-type "Notebook". Add this model to the dmi_switches_allow_list. Signed-off-by: Arnold Gozum Link: https://lore.kernel.org/r/20201226205307.249659-1-arngozum@gmail.com Signed-off-by: Hans de Goede

platform/x86: touchscreen_dmi: Add swap-x-y quirk for Goodix touchscreen on Estar Beauty HD tablet

2021-01-04T14:54:45Z

The Estar Beauty HD (MID 7316R) tablet uses a Goodix touchscreen, with the X and Y coordinates swapped compared to the LCD panel. Add a touchscreen_dmi entry for this adding a "touchscreen-swapped-x-y" device-property to the i2c-client instantiated for this device before the driver binds. This is the first entry of a Goodix touchscreen to touchscreen_dmi.c, so far DMI quirks for Goodix touchscreen's have been added directly to drivers/input/touchscreen/goodix.c. Currently there are 3 DMI tables in goodix.c: 1. rotated_screen[] for devices where the touchscreen is rotated 180 degrees vs the LCD panel 2. inverted_x_screen[] for devices where the X axis is inverted 3. nine_bytes_report[] for devices which use a non standard touch report size Arguably only 3. really needs to be inside the driver and the other 2 cases are better handled through the generic touchscreen DMI quirk mechanism from touchscreen_dmi.c, which allows adding device-props to any i2c-client. Esp. now that goodix.c is using the generic touchscreen_properties code. Alternative to the approach from this patch we could add a 4th dmi_system_id table for devices with swapped-x-y axis to goodix.c, but that seems undesirable. Cc: Bastien Nocera Cc: Dmitry Torokhov Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20201224135158.10976-1-hdegoede@redhat.com