linux/drivers/platform, branch v5.17

surface: surface3_power: Fix battery readings on batteries without a serial number

2022-02-24T12:48:39Z

The battery on the 2nd hand Surface 3 which I recently bought appears to not have a serial number programmed in. This results in any I2C reads from the registers containing the serial number failing with an I2C NACK. This was causing mshw0011_bix() to fail causing the battery readings to not work at all. Ignore EREMOTEIO (I2C NACK) errors when retrieving the serial number and continue with an empty serial number to fix this. Fixes: b1f81b496b0d ("platform/x86: surface3_power: MSHW0011 rev-eng implementation") BugLink: https://github.com/linux-surface/linux-surface/issues/608 Reviewed-by: Benjamin Tissoires Reviewed-by: Maximilian Luz Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20220224101848.7219-1-hdegoede@redhat.com

platform/x86: amd-pmc: Set QOS during suspend on CZN w/ timer wakeup

2022-02-24T12:48:34Z

commit 59348401ebed ("platform/x86: amd-pmc: Add special handling for timer based S0i3 wakeup") adds support for using another platform timer in lieu of the RTC which doesn't work properly on some systems. This path was validated and worked well before submission. During the 5.16-rc1 merge window other patches were merged that caused this to stop working properly. When this feature was used with 5.16-rc1 or later some OEM laptops with the matching firmware requirements from that commit would shutdown instead of program a timer based wakeup. This was bisected to commit 8d89835b0467 ("PM: suspend: Do not pause cpuidle in the suspend-to-idle path"). This wasn't supposed to cause any negative impacts and also tested well on both Intel and ARM platforms. However this changed the semantics of when CPUs are allowed to be in the deepest state. For the AMD systems in question it appears this causes a firmware crash for timer based wakeup. It's hypothesized to be caused by the `amd-pmc` driver sending `OS_HINT` and all the CPUs going into a deep state while the timer is still being programmed. It's likely a firmware bug, but to avoid it don't allow setting CPUs into the deepest state while using CZN timer wakeup path. If later it's discovered that this also occurs from "regular" suspends without a timer as well or on other silicon, this may be later expanded to run in the suspend path for more scenarios. Cc: stable@vger.kernel.org # 5.16+ Suggested-by: Rafael J. Wysocki Link: https://lore.kernel.org/linux-acpi/BL1PR12MB51570F5BD05980A0DCA1F3F4E23A9@BL1PR12MB5157.namprd12.prod.outlook.com/T/#mee35f39c41a04b624700ab2621c795367f19c90e Fixes: 8d89835b0467 ("PM: suspend: Do not pause cpuidle in the suspend-to-idle path") Fixes: 23f62d7ab25b ("PM: sleep: Pause cpuidle later and resume it earlier during system transitions") Fixes: 59348401ebed ("platform/x86: amd-pmc: Add special handling for timer based S0i3 wakeup" Reviewed-by: Rafael J. Wysocki Signed-off-by: Mario Limonciello Link: https://lore.kernel.org/r/20220223175237.6209-1-mario.limonciello@amd.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede

platform/x86: int3472: Add terminator to gpiod_lookup_table

2022-02-21T13:47:59Z

Without the terminator, if a con_id is passed to gpio_find() that does not exist in the lookup table the function will not stop looping correctly, and eventually cause an oops. Fixes: 19d8d6e36b4b ("platform/x86: int3472: Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell") Signed-off-by: Daniel Scally Link: https://lore.kernel.org/r/20220216225304.53911-5-djrscally@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede

platform/x86: asus-wmi: Fix regression when probing for fan curve control

2022-02-05T13:46:08Z

The fan curve control patches introduced a regression for at least the TUF FX506 and possibly other TUF series laptops that do not have support for fan curve control. As part of the probing process, asus_wmi_evaluate_method_buf is called to get the factory default fan curve . The WMI management function returns 0 on certain laptops to indicate lack of fan curve control instead of ASUS_WMI_UNSUPPORTED_METHOD. This 0 is transformed to -ENODATA which results in failure when probing. Fixes: 0f0ac158d28f ("platform/x86: asus-wmi: Add support for custom fan curves") Reported-and-tested-by: Abhijeet V Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20220205112840.33095-1-hdegoede@redhat.com

platform/x86: thinkpad_acpi: Add dual-fan quirk for T15g (2nd gen)

2022-02-03T10:34:06Z

The ThinkPad T15g Gen 2 has 2 fan, add a TPACPI_FAN_2CTL quirk entry for it to the fan_quirk_table[] so that both fans can be controllerd. Reported-and-tested-by: David Dreschner Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20220203103302.49401-1-hdegoede@redhat.com

platform/x86: thinkpad_acpi: Fix incorrect use of platform profile on AMD platforms

2022-02-01T14:37:00Z

Lenovo AMD based platforms have been offering platform_profiles but they are not working correctly. This is because the mode we are using on the Intel platforms (MMC) is not available on the AMD platforms. This commit adds checking of the functional capabilities returned by the BIOS to confirm if MMC is supported or not. Profiles will not be available if the platform is not MMC capable. I'm investigating and working on an alternative for AMD platforms but that is still work-in-progress. Signed-off-by: Mark Pearson Link: https://lore.kernel.org/r/20220127190358.4078-1-markpearson@lenovo.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede

platform/x86: amd-pmc: Correct usage of SMU version

2022-01-24T10:14:49Z

Yellow carp has been outputting versions like `1093.24.0`, but this is supposed to be 69.24.0. That is the MSB is being interpreted incorrectly. The MSB is not part of the major version, but has generally been treated that way thus far. It's actually the program, and used to distinguish between two programs from a similar family but different codebase. Link: https://patchwork.freedesktop.org/patch/469993/ Signed-off-by: Mario Limonciello Link: https://lore.kernel.org/r/20220120174439.12770-1-mario.limonciello@amd.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede

platform/x86: asus-tf103c-dock: Make 2 global structs static

2022-01-24T09:41:47Z

tf103c_dock_hid_ll_driver and tf103c_dock_pm_ops are not used outside of the driver, make them both static. Reported-by: kernel test robot Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20220117112644.260168-2-hdegoede@redhat.com

platform/x86: amd-pmc: Make amd_pmc_stb_debugfs_fops static

2022-01-24T09:41:47Z

amd_pmc_stb_debugfs_fops is not used outside of amd-pmc.c, make it static. Cc: Sanket Goswami Reported-by: kernel test robot Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20220117112644.260168-1-hdegoede@redhat.com

platform/x86: ISST: Fix possible circular locking dependency detected

2022-01-24T09:41:46Z

As reported: [ 256.104522] ====================================================== [ 256.113783] WARNING: possible circular locking dependency detected [ 256.120093] 5.16.0-rc6-yocto-standard+ #99 Not tainted [ 256.125362] ------------------------------------------------------ [ 256.131673] intel-speed-sel/844 is trying to acquire lock: [ 256.137290] ffffffffc036f0d0 (punit_misc_dev_lock){+.+.}-{3:3}, at: isst_if_open+0x18/0x90 [isst_if_common] [ 256.147171] [ 256.147171] but task is already holding lock: [ 256.153135] ffffffff8ee7cb50 (misc_mtx){+.+.}-{3:3}, at: misc_open+0x2a/0x170 [ 256.160407] [ 256.160407] which lock already depends on the new lock. [ 256.160407] [ 256.168712] [ 256.168712] the existing dependency chain (in reverse order) is: [ 256.176327] [ 256.176327] -> #1 (misc_mtx){+.+.}-{3:3}: [ 256.181946] lock_acquire+0x1e6/0x330 [ 256.186265] __mutex_lock+0x9b/0x9b0 [ 256.190497] mutex_lock_nested+0x1b/0x20 [ 256.195075] misc_register+0x32/0x1a0 [ 256.199390] isst_if_cdev_register+0x65/0x180 [isst_if_common] [ 256.205878] isst_if_probe+0x144/0x16e [isst_if_mmio] ... [ 256.241976] [ 256.241976] -> #0 (punit_misc_dev_lock){+.+.}-{3:3}: [ 256.248552] validate_chain+0xbc6/0x1750 [ 256.253131] __lock_acquire+0x88c/0xc10 [ 256.257618] lock_acquire+0x1e6/0x330 [ 256.261933] __mutex_lock+0x9b/0x9b0 [ 256.266165] mutex_lock_nested+0x1b/0x20 [ 256.270739] isst_if_open+0x18/0x90 [isst_if_common] [ 256.276356] misc_open+0x100/0x170 [ 256.280409] chrdev_open+0xa5/0x1e0 ... The call sequence suggested that misc_device /dev file can be opened before misc device is yet to be registered, which is done only once. Here punit_misc_dev_lock was used as common lock, to protect the registration by multiple ISST HW drivers, one time setup, prevent duplicate registry of misc device and prevent load/unload when device is open. We can split into locks: - One which just prevent duplicate call to misc_register() and one time setup. Also never call again if the misc_register() failed or required one time setup is failed. This lock is not shared with any misc device callbacks. - The other lock protects registry, load and unload of HW drivers. Sequence in isst_if_cdev_register() - Register callbacks under punit_misc_dev_open_lock - Call isst_misc_reg() which registers misc_device on the first registry which is under punit_misc_dev_reg_lock, which is not shared with callbacks. Sequence in isst_if_cdev_unregister Just opposite of isst_if_cdev_register Reported-and-tested-by: Liwei Song Signed-off-by: Srinivas Pandruvada Link: https://lore.kernel.org/r/20220112022521.54669-1-srinivas.pandruvada@linux.intel.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede