linux/drivers/platform, branch v6.4

platform/x86/amd/pmf: Register notify handler only if SPS is enabled

2023-06-22T08:20:00Z

Power source notify handler is getting registered even when none of the PMF feature in enabled leading to a crash. ... [ 22.592162] Call Trace: [ 22.592164] [ 22.592164] ? rcu_note_context_switch+0x5e0/0x660 [ 22.592166] ? __warn+0x81/0x130 [ 22.592171] ? rcu_note_context_switch+0x5e0/0x660 [ 22.592172] ? report_bug+0x171/0x1a0 [ 22.592175] ? prb_read_valid+0x1b/0x30 [ 22.592177] ? handle_bug+0x3c/0x80 [ 22.592178] ? exc_invalid_op+0x17/0x70 [ 22.592179] ? asm_exc_invalid_op+0x1a/0x20 [ 22.592182] ? rcu_note_context_switch+0x5e0/0x660 [ 22.592183] ? acpi_ut_delete_object_desc+0x86/0xb0 [ 22.592186] ? acpi_ut_update_ref_count.part.0+0x22d/0x930 [ 22.592187] __schedule+0xc0/0x1410 [ 22.592189] ? ktime_get+0x3c/0xa0 [ 22.592191] ? lapic_next_event+0x1d/0x30 [ 22.592193] ? hrtimer_start_range_ns+0x25b/0x350 [ 22.592196] schedule+0x5e/0xd0 [ 22.592197] schedule_hrtimeout_range_clock+0xbe/0x140 [ 22.592199] ? __pfx_hrtimer_wakeup+0x10/0x10 [ 22.592200] usleep_range_state+0x64/0x90 [ 22.592203] amd_pmf_send_cmd+0x106/0x2a0 [amd_pmf bddfe0fe3712aaa99acce3d5487405c5213c6616] [ 22.592207] amd_pmf_update_slider+0x56/0x1b0 [amd_pmf bddfe0fe3712aaa99acce3d5487405c5213c6616] [ 22.592210] amd_pmf_set_sps_power_limits+0x72/0x80 [amd_pmf bddfe0fe3712aaa99acce3d5487405c5213c6616] [ 22.592213] amd_pmf_pwr_src_notify_call+0x49/0x90 [amd_pmf bddfe0fe3712aaa99acce3d5487405c5213c6616] [ 22.592216] notifier_call_chain+0x5a/0xd0 [ 22.592218] atomic_notifier_call_chain+0x32/0x50 ... Fix this by moving the registration of source change notify handler only when SPS(Static Slider) is advertised as supported. Reported-by: Allen Zhong Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217571 Fixes: 4c71ae414474 ("platform/x86/amd/pmf: Add support SPS PMF feature") Tested-by: Patil Rajesh Reddy Reviewed-by: Mario Limonciello Signed-off-by: Shyam Sundar S K Link: https://lore.kernel.org/r/20230622060309.310001-1-Shyam-sundar.S-k@amd.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede

platform/x86: int3472: Avoid crash in unregistering regulator gpio

2023-05-30T10:10:22Z

When int3472 is loaded before GPIO driver, acpi_get_and_request_gpiod() failed but the returned gpio descriptor is not NULL, it will cause panic in later gpiod_put(), so set the gpio_desc to NULL in register error handling to avoid such crash. Signed-off-by: Hao Yao Signed-off-by: Bingbu Cao Link: https://lore.kernel.org/r/20230524035135.90315-1-bingbu.cao@intel.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede

platform/surface: aggregator_tabletsw: Add support for book mode in POS subsystem

2023-05-30T09:20:30Z

Devices with a type-cover have an additional "book" mode, deactivating type-cover input and turning off its backlight. This is currently unsupported, leading to the warning surface_aggregator_tablet_mode_switch 01:26:01:00:01: unknown device posture for type-cover: 6 Therefore, add support for this state and map it to enable tablet-mode. Fixes: 37ff64cd81ff ("platform/surface: aggregator_tabletsw: Add support for Type-Cover posture source") Signed-off-by: Maximilian Luz Link: https://lore.kernel.org/r/20230525213218.2797480-3-luzmaximilian@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede

platform/surface: aggregator_tabletsw: Add support for book mode in KIP subsystem

2023-05-30T09:20:26Z

Devices with a type-cover have an additional "book" mode, deactivating type-cover input and turning off its backlight. This is currently unsupported, leading to the warning surface_aggregator_tablet_mode_switch 01:0e:01:00:01: unknown KIP cover state: 6 Therefore, add support for this state and map it to enable tablet-mode. Fixes: 9f794056db5b ("platform/surface: Add KIP/POS tablet-mode switch driver") Signed-off-by: Maximilian Luz Link: https://lore.kernel.org/r/20230525213218.2797480-2-luzmaximilian@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede

platform/surface: aggregator: Allow completion work-items to be executed in parallel

2023-05-30T09:20:16Z

Currently, event completion work-items are restricted to be run strictly in non-parallel fashion by the respective workqueue. However, this has lead to some problems: In some instances, the event notifier function called inside this completion workqueue takes a non-negligible amount of time to execute. One such example is the battery event handling code (surface_battery.c), which can result in a full battery information refresh, involving further synchronous communication with the EC inside the event handler. This is made worse if the communication fails spuriously, generally incurring a multi-second timeout. Since the event completions are run strictly non-parallel, this blocks other events from being propagated to the respective subsystems. This becomes especially noticeable for keyboard and touchpad input, which also funnel their events through this system. Here, users have reported occasional multi-second "freezes". Note, however, that the event handling system was never intended to run purely sequentially. Instead, we have one work struct per EC/SAM subsystem, processing the event queue for that subsystem. These work structs were intended to run in parallel, allowing sequential processing of work items for each subsystem but parallel processing of work items across subsystems. The only restriction to this is the way the workqueue is created. Therefore, replace create_workqueue() with alloc_workqueue() and do not restrict the maximum number of parallel work items to be executed on that queue, resolving any cross-subsystem blockage. Fixes: c167b9c7e3d6 ("platform/surface: Add Surface Aggregator subsystem") Link: https://github.com/linux-surface/linux-surface/issues/1026 Signed-off-by: Maximilian Luz Link: https://lore.kernel.org/r/20230525210110.2785470-1-luzmaximilian@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede

platform/x86/intel/ifs: Annotate work queue on stack so object debug does not complain

2023-05-23T10:55:16Z

Object Debug results in the following warning while attempting to load ifs firmware: [ 220.007422] ODEBUG: object 000000003bf952db is on stack 00000000e843994b, but NOT annotated. [ 220.007459] ------------[ cut here ]------------ [ 220.007461] WARNING: CPU: 0 PID: 11774 at lib/debugobjects.c:548 __debug_object_init.cold+0x22e/0x2d5 [ 220.137476] RIP: 0010:__debug_object_init.cold+0x22e/0x2d5 [ 220.254774] Call Trace: [ 220.257641] [ 220.265606] scan_chunks_sanity_check+0x368/0x5f0 [intel_ifs] [ 220.288292] ifs_load_firmware+0x2a3/0x400 [intel_ifs] [ 220.332793] current_batch_store+0xea/0x160 [intel_ifs] [ 220.357947] kernfs_fop_write_iter+0x355/0x530 [ 220.363048] new_sync_write+0x28e/0x4a0 [ 220.381226] vfs_write+0x62a/0x920 [ 220.385160] ksys_write+0xf9/0x1d0 [ 220.399421] do_syscall_64+0x59/0x90 [ 220.440635] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 220.566845] ---[ end trace 3a01b299db142b41 ]--- Correct this by calling INIT_WORK_ONSTACK instead of INIT_WORK. Fixes: 684ec215706d ("platform/x86/intel/ifs: Authenticate and copy to secured memory") Signed-off-by: David Arcari Cc: Jithu Joseph Cc: Ashok Raj Cc: Tony Luck Cc: Hans de Goede Cc: Mark Gross Cc: Greg Kroah-Hartman Cc: Thomas Gleixner Cc: Dan Williams Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230523105400.674152-1-darcari@redhat.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede

platform/x86: ISST: Remove 8 socket limit

2023-05-23T10:52:05Z

Stop restricting the PCI search to a range of PCI domains fed to pci_get_domain_bus_and_slot(). Instead, use for_each_pci_dev() and look at all PCI domains in one pass. On systems with more than 8 sockets, this avoids error messages like "Information: Invalid level, Can't get TDP control information at specified levels on cpu 480" from the intel speed select utility. Fixes: aa2ddd242572 ("platform/x86: ISST: Use numa node id for cpu pci dev mapping") Signed-off-by: Steve Wahl Reviewed-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20230519160420.2588475-1-steve.wahl@hpe.com Signed-off-by: Hans de Goede

platform/mellanox: mlxbf-pmc: fix sscanf() error checking

2023-05-15T12:56:22Z

The sscanf() function never returns negatives. It returns the number of items successfully read. Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver") Signed-off-by: Dan Carpenter Reviewed-by: Ilpo Järvinen Link: https://lore.kernel.org/r/4ccdfd28-099b-40bf-8d77-ad4ea2e76b93@kili.mountain Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede

platform/x86/amd/pmf: Fix CnQF and auto-mode after resume

2023-05-15T12:56:13Z

After suspend/resume cycle there is an error message and auto-mode or CnQF stops working. [ 5741.447511] amd-pmf AMDI0100:00: SMU cmd failed. err: 0xff [ 5741.447523] amd-pmf AMDI0100:00: AMD_PMF_REGISTER_RESPONSE:ff [ 5741.447527] amd-pmf AMDI0100:00: AMD_PMF_REGISTER_ARGUMENT:7 [ 5741.447531] amd-pmf AMDI0100:00: AMD_PMF_REGISTER_MESSAGE:16 [ 5741.447540] amd-pmf AMDI0100:00: [AUTO_MODE] avg power: 0 mW mode: QUIET This is because the DRAM address used for accessing metrics table needs to be refreshed after a suspend resume cycle. Add a resume callback to reset this again. Fixes: 1a409b35c995 ("platform/x86/amd/pmf: Get performance metrics from PMFW") Signed-off-by: Mario Limonciello Link: https://lore.kernel.org/r/20230513011408.958-1-mario.limonciello@amd.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede

platform/x86: asus-wmi: Ignore WMI events with codes 0x7B, 0xC0

2023-05-15T12:55:57Z

On ASUS GU604V the key 0x7B is issued when the charger is connected or disconnected, and key 0xC0 is issued when an external display is connected or disconnected. This commit maps them to KE_IGNORE to slience kernel messages about unknown keys, such as: kernel: asus_wmi: Unknown key code 0x7b Signed-off-by: Alexandru Sorodoc Link: https://lore.kernel.org/r/20230512101517.47416-1-ealex95@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede