linux/drivers/power, branch v5.8

Merge tag 'for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

2020-06-10T18:28:35Z

Pull power supply and reset updates from Sebastian Reichel: "This time there are lots of changes. Quite a few changes to the core, lots of driver changes and one change to kobject core (with Ack from Greg). Summary: kobject: - Increase number of allowed uevent variables power-supply core: - Add power-supply type in uevent - Cleanup property handling in core - Make property and usb_type pointers const - Convert core power-supply DT binding to YAML - Cleanup HWMON code - Add new health status "calibration required" - Add new properties for manufacture date and capacity error margin battery drivers: - new cw2015 battery driver used by pine64 Pinebook Pro laptop - axp22: blacklist on Meegopad T02 - sc27xx: support current/voltage reading - max17042: support time-to-empty reading - simple-battery: add more battery parameters - bq27xxx: convert DT binding document to YAML - sbs-battery: add TI BQ20Z65 support, fix technology property, convert DT binding to YAML, add option to disable charger broadcasts, add new properties: manufacture date, capacity error margin, average current, charge current and voltage and support calibration required health status - misc fixes charger drivers: - bq25890: cleanup, implement charge type, precharge current and input current limiting properties - bd70528: use new linear range helper library - bd99954: new charger driver - mp2629: new charger driver - misc fixes reboot drivers: - oxnas-restart: introduce new driver - syscon-reboot: convert DT binding to YAML, add parent syscon device support - misc fixes" * tag 'for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (85 commits) power: supply: cw2015: Attach OF ID table to the driver power: reset: gpio-poweroff: add missing '\n' in dev_err() Revert "power: supply: sbs-battery: simplify read_read_string_data" Revert "power: supply: sbs-battery: add PEC support" dt-bindings: power: sbs-battery: Convert to yaml power: supply: sbs-battery: constify power-supply property array power: supply: sbs-battery: switch to i2c's probe_new power: supply: sbs-battery: switch from of_property_* to device_property_* power: supply: sbs-battery: add ability to disable charger broadcasts power: supply: sbs-battery: fix idle battery status power: supply: sbs-battery: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED support power: supply: sbs-battery: add MANUFACTURE_DATE support power: supply: sbs-battery: add POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT/VOLTAGE_MAX support power: supply: sbs-battery: Improve POWER_SUPPLY_PROP_TECHNOLOGY support power: supply: sbs-battery: add POWER_SUPPLY_PROP_CURRENT_AVG support power: supply: sbs-battery: add PEC support power: supply: sbs-battery: simplify read_read_string_data power: supply: sbs-battery: add POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN support power: supply: sbs-battery: Add TI BQ20Z65 support power: supply: core: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED ...

power: supply: cw2015: Attach OF ID table to the driver

2020-06-05T23:13:56Z

It appears that OF ID table was hanging around without being attached to the driver. Attach it properly. Fixes: b4c7715c10c1 ("power: supply: add CellWise cw2015 fuel gauge driver") Reported-by: kbuild test robot Signed-off-by: Andy Shevchenko Acked-By: Tobias Schramm Tested-By: Tobias Schramm Signed-off-by: Sebastian Reichel

power: reset: gpio-poweroff: add missing '\n' in dev_err()

2020-06-05T23:13:26Z

dev_err() needs a terminating newline. Signed-off-by: Luca Ceresoli Signed-off-by: Sebastian Reichel

Merge tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-06-05T02:47:11Z

Pull ARM SoC updates from Arnd Bergmann: "One new platform gets added, the Realtek RTD1195, which is an older Cortex-a7 based relative of the RTD12xx chips that are already supported in arch/arm64. The platform may also be extended to support running 32-bit kernels on those 64-bit chips for memory-constrained machines. In the Renesas shmobile platform, we gain support for "RZ/G1H" or R8A7742, an eight-core chip based on Cortex-A15 and Cortex-A7 cores, originally released in 2016 as one of the last high-end 32-bit designs. There is ongoing cleanup for the integrator, tegra, imx, and omap2 platforms, with integrator getting very close to the goal of having zero code in arch/arm/, and omap2 moving more of the chip specifics from old board code into device tree files. The Versatile Express platform is made more modular, with built-in drivers now becoming loadable modules. This is part of a greater effort for the Android OS to have a common kernel binary for all platforms and any platform specific code in loadable modules. The PXA platform drops support for Compulab's pxa2xx boards that had rather unusual flash and PCI drivers but no known users remaining. All device drivers specific to those boards can now get removed as well. Across platforms, there is ongoing cleanup, with Geert and Rob revisiting some a lot of Kconfig options" * tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits) ARM: omap2: fix omap5_realtime_timer_init definition ARM: zynq: Don't select CONFIG_ICST ARM: OMAP2+: Fix regression for using local timer on non-SMP SoCs clk: versatile: Fix kconfig dependency on COMMON_CLK_VERSATILE ARM: davinci: fix build failure without I2C power: reset: vexpress: fix build issue power: vexpress: cleanup: use builtin_platform_driver power: vexpress: add suppress_bind_attrs to true Revert "ARM: vexpress: Don't select VEXPRESS_CONFIG" MAINTAINERS: pxa: remove Compulab arm/pxa support ARM: pxa: remove Compulab pxa2xx boards bus: arm-integrator-lm: Fix return value check in integrator_ap_lm_probe() soc: imx: move cpu code to drivers/soc/imx ARM: imx: move cpu definitions into a header ARM: imx: use device_initcall for imx_soc_device_init ARM: imx: pcm037: make pcm970_sja1000_platform_data static bus: ti-sysc: Timers no longer need legacy quirk handling ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter ARM: dts: Configure system timers for omap2 ARM: dts: Configure system timers for ti81xx ...

Merge tag 'mfd-next-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2020-06-04T17:38:42Z

Pull MFD updates from Lee Jones: "Core Frameworks: - Constify 'properties' attribute in core header file New Drivers: - Add support for Gateworks System Controller - Add support for MediaTek MT6358 PMIC - Add support for Mediatek MT6360 PMIC - Add support for Monolithic Power Systems MP2629 ADC and Battery charger Fix-ups: - Use new I2C API in htc-i2cpld - Remove superfluous code in sprd-sc27xx-spi - Improve error handling in stm32-timers - Device Tree additions/fixes in mt6397 - Defer probe betterment in wm8994-core - Improve module handling in wm8994-core - Staticify in stpmic1 - Trivial (spelling, formatting) in tqmx86 Bug Fixes: - Fix incorrect register/PCI IDs in intel-lpss-pci - Fix unbalanced Regulator API calls in wm8994-core - Fix double free() in wcd934x - Remove IRQ domain on failure in stmfx - Reset chip on resume in stmfx - Disable/enable IRQs on suspend/resume in stmfx - Do not use bulk writes on H/W which does not support them in max77620" * tag 'mfd-next-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (29 commits) mfd: mt6360: Remove duplicate REGMAP_IRQ_REG_LINE() entry mfd: Add support for PMIC MT6360 mfd: max77620: Use single-byte writes on MAX77620 mfd: wcd934x: Drop kfree for memory allocated with devm_kzalloc mfd: stmfx: Disable IRQ in suspend to avoid spurious interrupt mfd: stmfx: Fix stmfx_irq_init error path mfd: stmfx: Reset chip on resume as supply was disabled mfd: wm8994: Silence warning about supplies during deferred probe mfd: wm8994: Fix unbalanced calls to regulator_bulk_disable() mfd: wm8994: Fix driver operation if loaded as modules dt-bindings: mfd: mediatek: Add MT6397 Pin Controller mfd: Constify properties in mfd_cell mfd: stm32-timers: Use dma_request_chan() instead dma_request_slave_channel() mfd: sprd: Remove unnecessary spi_bus_type setting mfd: intel-lpss: Update LPSS UART #2 PCI ID for Jasper Lake mfd: tqmx86: Fix a typo in MODULE_DESCRIPTION mfd: stpmic1: Make stpmic1_regmap_config static mfd: htc-i2cpld: Convert to use i2c_new_client_device() MAINTAINERS: Add entry for mp2629 Battery Charger driver power: supply: mp2629: Add impedance compensation config ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2020-06-03T23:27:18Z

Pull networking updates from David Miller: 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz Augusto von Dentz. 2) Add GSO partial support to igc, from Sasha Neftin. 3) Several cleanups and improvements to r8169 from Heiner Kallweit. 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a device self-test. From Andrew Lunn. 5) Start moving away from custom driver versions, use the globally defined kernel version instead, from Leon Romanovsky. 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin. 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet. 8) Add sriov and vf support to hinic, from Luo bin. 9) Support Media Redundancy Protocol (MRP) in the bridging code, from Horatiu Vultur. 10) Support netmap in the nft_nat code, from Pablo Neira Ayuso. 11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina Dubroca. Also add ipv6 support for espintcp. 12) Lots of ReST conversions of the networking documentation, from Mauro Carvalho Chehab. 13) Support configuration of ethtool rxnfc flows in bcmgenet driver, from Doug Berger. 14) Allow to dump cgroup id and filter by it in inet_diag code, from Dmitry Yakunin. 15) Add infrastructure to export netlink attribute policies to userspace, from Johannes Berg. 16) Several optimizations to sch_fq scheduler, from Eric Dumazet. 17) Fallback to the default qdisc if qdisc init fails because otherwise a packet scheduler init failure will make a device inoperative. From Jesper Dangaard Brouer. 18) Several RISCV bpf jit optimizations, from Luke Nelson. 19) Correct the return type of the ->ndo_start_xmit() method in several drivers, it's netdev_tx_t but many drivers were using 'int'. From Yunjian Wang. 20) Add an ethtool interface for PHY master/slave config, from Oleksij Rempel. 21) Add BPF iterators, from Yonghang Song. 22) Add cable test infrastructure, including ethool interfaces, from Andrew Lunn. Marvell PHY driver is the first to support this facility. 23) Remove zero-length arrays all over, from Gustavo A. R. Silva. 24) Calculate and maintain an explicit frame size in XDP, from Jesper Dangaard Brouer. 25) Add CAP_BPF, from Alexei Starovoitov. 26) Support terse dumps in the packet scheduler, from Vlad Buslov. 27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei. 28) Add devm_register_netdev(), from Bartosz Golaszewski. 29) Minimize qdisc resets, from Cong Wang. 30) Get rid of kernel_getsockopt and kernel_setsockopt in order to eliminate set_fs/get_fs calls. From Christoph Hellwig. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits) selftests: net: ip_defrag: ignore EPERM net_failover: fixed rollback in net_failover_open() Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv" Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv" vmxnet3: allow rx flow hash ops only when rss is enabled hinic: add set_channels ethtool_ops support selftests/bpf: Add a default $(CXX) value tools/bpf: Don't use $(COMPILE.c) bpf, selftests: Use bpf_probe_read_kernel s390/bpf: Use bcr 0,%0 as tail call nop filler s390/bpf: Maintain 8-byte stack alignment selftests/bpf: Fix verifier test selftests/bpf: Fix sample_cnt shared between two threads bpf, selftests: Adapt cls_redirect to call csum_level helper bpf: Add csum_level helper for fixing up csum levels bpf: Fix up bpf_skb_adjust_room helper's skb csum setting sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf() crypto/chtls: IPv6 support for inline TLS Crypto/chcr: Fixes a coccinile check error Crypto/chcr: Fixes compilations warnings ...

Revert "power: supply: sbs-battery: simplify read_read_string_data"

2020-06-02T15:08:33Z

The commit is a nice cleanup, but breaks booting on exynos5 based chromebooks. It's seems to come down to exynos5's i2c driver not implementing I2C_FUNC_SMBUS_READ_BLOCK_DATA. It's not yet clear why that breaks boot / massively slows it down when userspace starts, so revert the problematic patch. This reverts commit c4b12a2f3f3de670f6be5e96092a2cab0b877f1a. Signed-off-by: Sebastian Reichel

Revert "power: supply: sbs-battery: add PEC support"

2020-06-02T14:59:08Z

This depends on the simplification of sbs_read_string_data, which breaks booting exynos5 based chromebooks. More investigation is required, so this patch and the simplification patch are reverted for this merge window. Note, that this is only a partial revert, since sbs_update_presence() has not been removed. It is also required for the charger broadcast disabling. This reverts commit 79bcd5a4a66076a8a8dacd7f4a3be1952283aef4. Signed-off-by: Sebastian Reichel

power: supply: sbs-battery: constify power-supply property array

2020-05-28T22:39:35Z

Signed-off-by: Sebastian Reichel

power: supply: sbs-battery: switch to i2c's probe_new

2020-05-28T22:39:34Z

sbs-battery does not use the ID parameter, so switch to i2c's probe_new API. Signed-off-by: Sebastian Reichel