linux/drivers/power, branch v6.13

power: supply: bq24190: Fix BQ24296 Vbus regulator support

2024-12-18T23:35:30Z

There are 2 issues with bq24296_set_otg_vbus(): 1. When writing the OTG_CONFIG bit it uses POC_CHG_CONFIG_SHIFT which should be POC_OTG_CONFIG_SHIFT. 2. When turning the regulator off it never turns charging back on. Note this must be done through bq24190_charger_set_charge_type(), to ensure that the charge_type property value of none/trickle/fast is honored. Resolve both issues to fix BQ24296 Vbus regulator support not working. Fixes: b150a703b56f ("power: supply: bq24190_charger: Add support for BQ24296") Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20241116203648.169100-2-hdegoede@redhat.com Signed-off-by: Sebastian Reichel

power: supply: cros_charge-control: hide start threshold on v2 cmd

2024-12-10T01:51:45Z

ECs implementing the v2 command will not stop charging when the end threshold is reached. Instead they will begin discharging until the start threshold is reached, leading to permanent charge and discharge cycles. This defeats the point of the charge control mechanism. Avoid the issue by hiding the start threshold on v2 systems. Instead on those systems program the EC with start == end which forces the EC to reach and stay at that level. v1 does not support thresholds and v3 works correctly, at least judging from the code. Reported-by: Thomas Koch Fixes: c6ed48ef5259 ("power: supply: add ChromeOS EC based charge control driver") Cc: stable@vger.kernel.org Signed-off-by: Thomas Weißschuh Link: https://lore.kernel.org/r/20241208-cros_charge-control-v2-v1-3-8d168d0f08a3@weissschuh.net Signed-off-by: Sebastian Reichel

power: supply: cros_charge-control: allow start_threshold == end_threshold

2024-12-10T01:51:45Z

Allow setting the start and stop thresholds to the same value. There is no reason to disallow it. Suggested-by: Thomas Koch Fixes: c6ed48ef5259 ("power: supply: add ChromeOS EC based charge control driver") Cc: stable@vger.kernel.org Signed-off-by: Thomas Weißschuh Link: https://lore.kernel.org/r/20241208-cros_charge-control-v2-v1-2-8d168d0f08a3@weissschuh.net Signed-off-by: Sebastian Reichel

power: supply: cros_charge-control: add mutex for driver data

2024-12-10T01:51:45Z

Concurrent accesses through sysfs may lead to inconsistent state in the priv data. Introduce a mutex to avoid this. Fixes: c6ed48ef5259 ("power: supply: add ChromeOS EC based charge control driver") Cc: stable@vger.kernel.org Signed-off-by: Thomas Weißschuh Link: https://lore.kernel.org/r/20241208-cros_charge-control-v2-v1-1-8d168d0f08a3@weissschuh.net Signed-off-by: Sebastian Reichel

power: supply: gpio-charger: Fix set charge current limits

2024-12-10T01:51:24Z

Fix set charge current limits for devices which allow to set the lowest charge current limit to be greater zero. If requested charge current limit is below lowest limit, the index equals current_limit_map_size which leads to accessing memory beyond allocated memory. Fixes: be2919d8355e ("power: supply: gpio-charger: add charge-current-limit feature") Cc: stable@vger.kernel.org Signed-off-by: Dimitri Fedrau Link: https://lore.kernel.org/r/20241209-fix-charge-current-limit-v1-1-760d9b8f2af3@liebherr.com Signed-off-by: Sebastian Reichel

Merge tag 'for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

2024-11-28T17:28:09Z

Pull power supply and reset updates from Sebastian Reichel: "Power-supply core: - replace power_supply_register_no_ws() with power_supply_register() and a new "no_wakeup_source" field in struct power_supply_config - constify battery info tables in the core and all drivers - switch back to remove callback for all platform drivers - allow power_supply_put() to be called from atomic context - mark attribute arrays read-only after init Power-supply drivers: - new driver for TWL6030 and TWL6032 - rk817: improve battery capacity calibration - misc small cleanups and fixes" * tag 'for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (42 commits) power: reset: ep93xx: add AUXILIARY_BUS dependency dt-bindings: power: reset: Convert mode-.* properties to array power: supply: sc27xx: Fix battery detect GPIO probe dt-bindings: power: supply: sc27xx-fg: document deprecated bat-detect-gpio reset: keystone-reset: remove unused macros power: supply: axp20x_battery: Use scaled iio_read_channel power: supply: axp20x_usb_power: Use scaled iio_read_channel power: supply: generic-adc-battery: change my gmail power: supply: pmu_battery: Set power supply type to BATTERY power: Switch back to struct platform_driver::remove() power: supply: hwmon: move interface to private header power: supply: rk817: Update battery capacity calibration power: supply: rk817: stop updating info in suspend power: supply: rt9471: Use IC status regfield to report real charger status power: supply: rt9471: Fix wrong WDT function regfield declaration dt-bindings: power/supply: qcom,pmi8998-charger: Drop incorrect "#interrupt-cells" from example power: supply: core: mark attribute arrays as ro_after_init power: supply: core: unexport power_supply_property_is_writeable() power: supply: core: use device mutex wrappers power: supply: bq27xxx: Fix registers of bq27426 ...

Merge tag 'pwrseq-updates-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

2024-11-20T20:41:03Z

Pull power sequencing updates from Bartosz Golaszewski: - extend support for the wcn6855 model in the pwrseq-qcom-wcn driver - make this driver depend on CONFIG_OF=y as it uses some very OF-specific interfaces and depends on phandle parsing * tag 'pwrseq-updates-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: power: sequencing: qcom-wcn: improve support for wcn6855 power: sequencing: make the QCom PMU pwrseq driver depend on CONFIG_OF

Merge tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2024-11-20T00:35:06Z

Pull timer updates from Thomas Gleixner: "A rather large update for timekeeping and timers: - The final step to get rid of auto-rearming posix-timers posix-timers are currently auto-rearmed by the kernel when the signal of the timer is ignored so that the timer signal can be delivered once the corresponding signal is unignored. This requires to throttle the timer to prevent a DoS by small intervals and keeps the system pointlessly out of low power states for no value. This is a long standing non-trivial problem due to the lock order of posix-timer lock and the sighand lock along with life time issues as the timer and the sigqueue have different life time rules. Cure this by: - Embedding the sigqueue into the timer struct to have the same life time rules. Aside of that this also avoids the lookup of the timer in the signal delivery and rearm path as it's just a always valid container_of() now. - Queuing ignored timer signals onto a seperate ignored list. - Moving queued timer signals onto the ignored list when the signal is switched to SIG_IGN before it could be delivered. - Walking the ignored list when SIG_IGN is lifted and requeue the signals to the actual signal lists. This allows the signal delivery code to rearm the timer. This also required to consolidate the signal delivery rules so they are consistent across all situations. With that all self test scenarios finally succeed. - Core infrastructure for VFS multigrain timestamping This is required to allow the kernel to use coarse grained time stamps by default and switch to fine grained time stamps when inode attributes are actively observed via getattr(). These changes have been provided to the VFS tree as well, so that the VFS specific infrastructure could be built on top. - Cleanup and consolidation of the sleep() infrastructure - Move all sleep and timeout functions into one file - Rework udelay() and ndelay() into proper documented inline functions and replace the hardcoded magic numbers by proper defines. - Rework the fsleep() implementation to take the reality of the timer wheel granularity on different HZ values into account. Right now the boundaries are hard coded time ranges which fail to provide the requested accuracy on different HZ settings. - Update documentation for all sleep/timeout related functions and fix up stale documentation links all over the place - Fixup a few usage sites - Rework of timekeeping and adjtimex(2) to prepare for multiple PTP clocks A system can have multiple PTP clocks which are participating in seperate and independent PTP clock domains. So far the kernel only considers the PTP clock which is based on CLOCK TAI relevant as that's the clock which drives the timekeeping adjustments via the various user space daemons through adjtimex(2). The non TAI based clock domains are accessible via the file descriptor based posix clocks, but their usability is very limited. They can't be accessed fast as they always go all the way out to the hardware and they cannot be utilized in the kernel itself. As Time Sensitive Networking (TSN) gains traction it is required to provide fast user and kernel space access to these clocks. The approach taken is to utilize the timekeeping and adjtimex(2) infrastructure to provide this access in a similar way how the kernel provides access to clock MONOTONIC, REALTIME etc. Instead of creating a duplicated infrastructure this rework converts timekeeping and adjtimex(2) into generic functionality which operates on pointers to data structures instead of using static variables. This allows to provide time accessors and adjtimex(2) functionality for the independent PTP clocks in a subsequent step. - Consolidate hrtimer initialization hrtimers are set up by initializing the data structure and then seperately setting the callback function for historical reasons. That's an extra unnecessary step and makes Rust support less straight forward than it should be. Provide a new set of hrtimer_setup*() functions and convert the core code and a few usage sites of the less frequently used interfaces over. The bulk of the htimer_init() to hrtimer_setup() conversion is already prepared and scheduled for the next merge window. - Drivers: - Ensure that the global timekeeping clocksource is utilizing the cluster 0 timer on MIPS multi-cluster systems. Otherwise CPUs on different clusters use their cluster specific clocksource which is not guaranteed to be synchronized with other clusters. - Mostly boring cleanups, fixes, improvements and code movement" * tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (140 commits) posix-timers: Fix spurious warning on double enqueue versus do_exit() clocksource/drivers/arm_arch_timer: Use of_property_present() for non-boolean properties clocksource/drivers/gpx: Remove redundant casts clocksource/drivers/timer-ti-dm: Fix child node refcount handling dt-bindings: timer: actions,owl-timer: convert to YAML clocksource/drivers/ralink: Add Ralink System Tick Counter driver clocksource/drivers/mips-gic-timer: Always use cluster 0 counter as clocksource clocksource/drivers/timer-ti-dm: Don't fail probe if int not found clocksource/drivers:sp804: Make user selectable clocksource/drivers/dw_apb: Remove unused dw_apb_clockevent functions hrtimers: Delete hrtimer_init_on_stack() alarmtimer: Switch to use hrtimer_setup() and hrtimer_setup_on_stack() io_uring: Switch to use hrtimer_setup_on_stack() sched/idle: Switch to use hrtimer_setup_on_stack() hrtimers: Delete hrtimer_init_sleeper_on_stack() wait: Switch to use hrtimer_setup_sleeper_on_stack() timers: Switch to use hrtimer_setup_sleeper_on_stack() net: pktgen: Switch to use hrtimer_setup_sleeper_on_stack() futex: Switch to use hrtimer_setup_sleeper_on_stack() fs/aio: Switch to use hrtimer_setup_sleeper_on_stack() ...

power: reset: ep93xx: add AUXILIARY_BUS dependency

2024-11-11T23:07:00Z

This fails to link when compile-testing and the auxiliary bus is not built-in: x86_64-linux-ld: drivers/power/reset/ep93xx-restart.o: in function `ep93xx_reboot_driver_init': ep93xx-restart.c:(.init.text+0x11): undefined reference to `__auxiliary_driver_register' x86_64-linux-ld: drivers/power/reset/ep93xx-restart.o: in function `ep93xx_reboot_driver_exit': ep93xx-restart.c:(.exit.text+0x8): undefined reference to `auxiliary_driver_unregister' Add the appropriate dependency. Fixes: 9fa7cdb4368f ("power: reset: Add a driver for the ep93xx reset") Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20241111104418.3891756-1-arnd@kernel.org Signed-off-by: Sebastian Reichel

power: supply: sc27xx: Fix battery detect GPIO probe

2024-11-11T22:05:19Z

The DT bindings specify the property as 'battery-detect-gpios', add handling for it. Keep fallback to the deprecated 'bat-detect-gpio' property to keep compatibility with older DTS. Signed-off-by: Stanislav Jakubek Link: https://lore.kernel.org/r/ca28b2f2037929c0011fc5c779c332c1d1ad5308.1730720720.git.stano.jakubek@gmail.com Signed-off-by: Sebastian Reichel