linux/drivers/powercap, branch v6.0

Merge tag 'pm-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2022-08-02T18:17:00Z

Pull power management updates from Rafael Wysocki: "These are mostly minor improvements all over including new CPU IDs for the Intel RAPL driver, an Energy Model rework to use micro-Watt as the power unit, cpufreq fixes and cleanus, cpuidle updates, devfreq updates, documentation cleanups and a new version of the pm-graph suite of utilities. Specifics: - Make cpufreq_show_cpus() more straightforward (Viresh Kumar). - Drop unnecessary CPU hotplug locking from store() used by cpufreq sysfs attributes (Viresh Kumar). - Make the ACPI cpufreq driver support the boost control interface on Zhaoxin/Centaur processors (Tony W Wang-oc). - Print a warning message on attempts to free an active cpufreq policy which should never happen (Viresh Kumar). - Fix grammar in the Kconfig help text for the loongson2 cpufreq driver (Randy Dunlap). - Use cpumask_var_t for an on-stack CPU mask in the ondemand cpufreq governor (Zhao Liu). - Add trace points for guest_halt_poll_ns grow/shrink to the haltpoll cpuidle driver (Eiichi Tsukata). - Modify intel_idle to treat C1 and C1E as independent idle states on Sapphire Rapids (Artem Bityutskiy). - Extend support for wakeirq to callback wrappers used during system suspend and resume (Ulf Hansson). - Defer waiting for device probe before loading a hibernation image till the first actual device access to avoid possible deadlocks reported by syzbot (Tetsuo Handa). - Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn Helgaas). - Add Raptor Lake-P to the list of processors supported by the Intel RAPL driver (George D Sworo). - Add Alder Lake-N and Raptor Lake-P to the list of processors for which Power Limit4 is supported in the Intel RAPL driver (Sumeet Pawnikar). - Make pm_genpd_remove() check genpd_debugfs_dir against NULL before attempting to remove it (Hsin-Yi Wang). - Change the Energy Model code to represent power in micro-Watts and adjust its users accordingly (Lukasz Luba). - Add new devfreq driver for Mediatek CCI (Cache Coherent Interconnect) (Johnson Wang). - Convert the Samsung Exynos SoC Bus bindings to DT schema of exynos-bus.c (Krzysztof Kozlowski). - Address kernel-doc warnings by adding the description for unused function parameters in devfreq core (Mauro Carvalho Chehab). - Use NULL to pass a null pointer rather than zero according to the function propotype in imx-bus.c (Colin Ian King). - Print error message instead of error interger value in tegra30-devfreq.c (Dmitry Osipenko). - Add checks to prevent setting negative frequency QoS limits for CPUs (Shivnandan Kumar). - Update the pm-graph suite of utilities to the latest revision 5.9 including multiple improvements (Todd Brandt). - Drop pme_interrupt reference from the PCI power management documentation (Mario Limonciello)" * tag 'pm-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits) powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P PM: QoS: Add check to make sure CPU freq is non-negative PM: hibernate: defer device probing when resuming from hibernation intel_idle: make SPR C1 and C1E be independent cpufreq: ondemand: Use cpumask_var_t for on-stack cpu mask cpufreq: loongson2: fix Kconfig "its" grammar pm-graph v5.9 cpufreq: Warn users while freeing active policy cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1 firmware: arm_scmi: Get detailed power scale from perf Documentation: EM: Switch to micro-Watts scale PM: EM: convert power field to micro-Watts precision and align drivers PM / devfreq: tegra30: Add error message for devm_devfreq_add_device() PM / devfreq: imx-bus: use NULL to pass a null pointer rather than zero PM / devfreq: shut up kernel-doc warnings dt-bindings: interconnect: samsung,exynos-bus: convert to dtschema PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver dt-bindings: interconnect: Add MediaTek CCI dt-bindings PM: domains: Ensure genpd_debugfs_dir exists before remove PM: runtime: Extend support for wakeirq for force_suspend|resume ...

Merge branches 'pm-core', 'pm-sleep', 'powercap', 'pm-domains' and 'pm-em'

2022-07-29T17:33:13Z

Merge core device power management changes for v5.20-rc1: - Extend support for wakeirq to callback wrappers used during system suspend and resume (Ulf Hansson). - Defer waiting for device probe before loading a hibernation image till the first actual device access to avoid possible deadlocks reported by syzbot (Tetsuo Handa). - Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn Helgaas). - Add Raptor Lake-P to the list of processors supported by the Intel RAPL driver (George D Sworo). - Add Alder Lake-N and Raptor Lake-P to the list of processors for which Power Limit4 is supported in the Intel RAPL driver (Sumeet Pawnikar). - Make pm_genpd_remove() check genpd_debugfs_dir against NULL before attempting to remove it (Hsin-Yi Wang). - Change the Energy Model code to represent power in micro-Watts and adjust its users accordingly (Lukasz Luba). * pm-core: PM: runtime: Extend support for wakeirq for force_suspend|resume * pm-sleep: PM: hibernate: defer device probing when resuming from hibernation PM: wakeup: Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP * powercap: powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P powercap: intel_rapl: Add support for RAPTORLAKE_P * pm-domains: PM: domains: Ensure genpd_debugfs_dir exists before remove * pm-em: cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1 firmware: arm_scmi: Get detailed power scale from perf Documentation: EM: Switch to micro-Watts scale PM: EM: convert power field to micro-Watts precision and align drivers

powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P

2022-07-26T18:58:28Z

Add Alder Lake-N and Raptor Lake-P to the list of processor models for which Power Limit4 is supported by the Intel RAPL driver. Signed-off-by: Sumeet Pawnikar Reviewed-by: Srinivas Pandruvada Reviewed-by: Andy Shevchenko Signed-off-by: Rafael J. Wysocki

PM: EM: convert power field to micro-Watts precision and align drivers

2022-07-15T17:17:30Z

The milli-Watts precision causes rounding errors while calculating efficiency cost for each OPP. This is especially visible in the 'simple' Energy Model (EM), where the power for each OPP is provided from OPP framework. This can cause some OPPs to be marked inefficient, while using micro-Watts precision that might not happen. Update all EM users which access 'power' field and assume the value is in milli-Watts. Solve also an issue with potential overflow in calculation of energy estimation on 32bit machine. It's needed now since the power value (thus the 'cost' as well) are higher. Example calculation which shows the rounding error and impact: power = 'dyn-power-coeff' * volt_mV * volt_mV * freq_MHz power_a_uW = (100 * 600mW * 600mW * 500MHz) / 10^6 = 18000 power_a_mW = (100 * 600mW * 600mW * 500MHz) / 10^9 = 18 power_b_uW = (100 * 605mW * 605mW * 600MHz) / 10^6 = 21961 power_b_mW = (100 * 605mW * 605mW * 600MHz) / 10^9 = 21 max_freq = 2000MHz cost_a_mW = 18 * 2000MHz/500MHz = 72 cost_a_uW = 18000 * 2000MHz/500MHz = 72000 cost_b_mW = 21 * 2000MHz/600MHz = 70 // <- artificially better cost_b_uW = 21961 * 2000MHz/600MHz = 73203 The 'cost_b_mW' (which is based on old milli-Watts) is misleadingly better that the 'cost_b_uW' (this patch uses micro-Watts) and such would have impact on the 'inefficient OPPs' information in the Cpufreq framework. This patch set removes the rounding issue. Signed-off-by: Lukasz Luba Acked-by: Daniel Lezcano Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki

powercap: intel_rapl: Add support for RAPTORLAKE_P

2022-07-05T18:59:20Z

Add RAPTORLAKE_P to the list of supported processor models in the Intel RAPL power capping driver. Signed-off-by: George D Sworo Acked-by: Zhang Rui Tested-by: Sumeet Pawnikar [ rjw: Minor changelog edits ] Signed-off-by: Rafael J. Wysocki

sched, drivers: Remove max param from effective_cpu_util()/sched_cpu_util()

2022-06-28T07:17:46Z

effective_cpu_util() already has a `int cpu' parameter which allows to retrieve the CPU capacity scale factor (or maximum CPU capacity) inside this function via an arch_scale_cpu_capacity(cpu). A lot of code calling effective_cpu_util() (or the shim sched_cpu_util()) needs the maximum CPU capacity, i.e. it will call arch_scale_cpu_capacity() already. But not having to pass it into effective_cpu_util() will make the EAS wake-up code easier, especially when the maximum CPU capacity reduced by the thermal pressure is passed through the EAS wake-up functions. Due to the asymmetric CPU capacity support of arm/arm64 architectures, arch_scale_cpu_capacity(int cpu) is a per-CPU variable read access via per_cpu(cpu_scale, cpu) on such a system. On all other architectures it is a a compile-time constant (SCHED_CAPACITY_SCALE). Signed-off-by: Dietmar Eggemann Signed-off-by: Peter Zijlstra (Intel) Acked-by: Vincent Guittot Tested-by: Lukasz Luba Link: https://lkml.kernel.org/r/20220621090414.433602-4-vdonnefort@google.com

Merge branches 'pm-em' and 'pm-cpuidle'

2022-05-23T17:18:51Z

Marge Energy Model support updates and cpuidle updates for 5.19-rc1: - Update the Energy Model support code to allow the Energy Model to be artificial, which means that the power values may not be on a uniform scale with other devices providing power information, and update the cpufreq_cooling and devfreq_cooling thermal drivers to support artificial Energy Models (Lukasz Luba). - Make DTPM check the Energy Model type (Lukasz Luba). - Fix policy counter decrementation in cpufreq if Energy Model is in use (Pierre Gondois). - Add AlderLake processor support to the intel_idle driver (Zhang Rui). - Fix regression leading to no genpd governor in the PSCI cpuidle driver and fix the riscv-sbi cpuidle driver to allow a genpd governor to be used (Ulf Hansson). * pm-em: PM: EM: Decrement policy counter powercap: DTPM: Check for Energy Model type thermal: cooling: Check Energy Model type in cpufreq_cooling and devfreq_cooling Documentation: EM: Add artificial EM registration description PM: EM: Remove old debugfs files and print all 'flags' PM: EM: Change the order of arguments in the .active_power() callback PM: EM: Use the new .get_cost() callback while registering EM PM: EM: Add artificial EM flag PM: EM: Add .get_cost() callback * pm-cpuidle: cpuidle: riscv-sbi: Fix code to allow a genpd governor to be used cpuidle: psci: Fix regression leading to no genpd governor intel_idle: Add AlderLake support

powercap: intel_rapl: remove redundant store to value after multiply

2022-05-19T17:48:17Z

There is no need to store the result of the multiply back to variable value after the multiplication. The store is redundant, replace *= with just *. Cleans up clang scan build warning: warning: Although the value stored to 'value' is used in the enclosing expression, the value is never actually read from 'value' [deadcode.DeadStores] Signed-off-by: Colin Ian King Signed-off-by: Rafael J. Wysocki

powercap: intel_rapl: add support for ALDERLAKE_N

2022-05-18T18:40:50Z

Add ALDERLAKE_N to the list of supported processor models in the Intel RAPL power capping driver. Signed-off-by: Zhang Rui [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki

powercap: RAPL: Add Power Limit4 support for RaptorLake

2022-05-11T17:50:11Z

Add RaptorLake to the list of processor models for which Power Limit4 is supported by the Intel RAPL driver. Signed-off-by: Sumeet Pawnikar [ rjw: Changelog rewrite ] Signed-off-by: Rafael J. Wysocki